commit ae9b15fbe63447bc1d3bba3769f409d17ca6fdf6 upstream.

When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.

       team0
         |
  +------+------+-----+-----+
  |      |      |     |     |
team1  team2  team3  ...  team200

If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.

But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.

Reproducer:

ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
        ip link add team$i master team0 type team
        ethtool -K team$i lro on
done

ethtool -K team0 lro off

In order to fix it, the notifier_ctx member of bonding/team is introduced.

Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 0aa64df30b382fc71d4fb1827d528e0eb3eff854.

Currently IFF_NO_ADDRCONF is used to prevent all ipv6 addrconf for the
slave ports of team, bonding and failover devices and it means no ipv6
packets can be sent out through these slave ports. However, for team
device, "nsna_ping" link_watch requires ipv6 addrconf. Otherwise, the
link will be marked failure. This patch removes the IFF_NO_ADDRCONF
flag set for team port, and we will fix the original issue in another
patch, as Jakub suggested.

Fixes: 0aa64df30b38 ("net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/63e09531fc47963d2e4eff376653d3db21b97058.1673980932.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking updates from Paolo Abeni:
 "Core:

   - Allow live renaming when an interface is up

   - Add retpoline wrappers for tc, improving considerably the
     performances of complex queue discipline configurations

   - Add inet drop monitor support

   - A few GRO performance improvements

   - Add infrastructure for atomic dev stats, addressing long standing
     data races

   - De-duplicate common code between OVS and conntrack offloading
     infrastructure

   - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements

   - Netfilter: introduce packet parser for tunneled packets

   - Replace IPVS timer-based estimators with kthreads to scale up the
     workload with the number of available CPUs

   - Add the helper support for connection-tracking OVS offload

  BPF:

   - Support for user defined BPF objects: the use case is to allocate
     own objects, build own object hierarchies and use the building
     blocks to build own data structures flexibly, for example, linked
     lists in BPF

   - Make cgroup local storage available to non-cgroup attached BPF
     programs

   - Avoid unnecessary deadlock detection and failures wrt BPF task
     storage helpers

   - A relevant bunch of BPF verifier fixes and improvements

   - Veristat tool improvements to support custom filtering, sorting,
     and replay of results

   - Add LLVM disassembler as default library for dumping JITed code

   - Lots of new BPF documentation for various BPF maps

   - Add bpf_rcu_read_{,un}lock() support for sleepable programs

   - Add RCU grace period chaining to BPF to wait for the completion of
     access from both sleepable and non-sleepable BPF programs

   - Add support storing struct task_struct objects as kptrs in maps

   - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
     values

   - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions

  Protocols:

   - TCP: implement Protective Load Balancing across switch links

   - TCP: allow dynamically disabling TCP-MD5 static key, reverting back
     to fast[er]-path

   - UDP: Introduce optional per-netns hash lookup table

   - IPv6: simplify and cleanup sockets disposal

   - Netlink: support different type policies for each generic netlink
     operation

   - MPTCP: add MSG_FASTOPEN and FastOpen listener side support

   - MPTCP: add netlink notification support for listener sockets events

   - SCTP: add VRF support, allowing sctp sockets binding to VRF devices

   - Add bridging MAC Authentication Bypass (MAB) support

   - Extensions for Ethernet VPN bridging implementation to better
     support multicast scenarios

   - More work for Wi-Fi 7 support, comprising conversion of all the
     existing drivers to internal TX queue usage

   - IPSec: introduce a new offload type (packet offload) allowing
     complete header processing and crypto offloading

   - IPSec: extended ack support for more descriptive XFRM error
     reporting

   - RXRPC: increase SACK table size and move processing into a
     per-local endpoint kernel thread, reducing considerably the
     required locking

   - IEEE 802154: synchronous send frame and extended filtering support,
     initial support for scanning available 15.4 networks

   - Tun: bump the link speed from 10Mbps to 10Gbps

   - Tun/VirtioNet: implement UDP segmentation offload support

  Driver API:

   - PHY/SFP: improve power level switching between standard level 1 and
     the higher power levels

   - New API for netdev <-> devlink_port linkage

   - PTP: convert existing drivers to new frequency adjustment
     implementation

   - DSA: add support for rx offloading

   - Autoload DSA tagging driver when dynamically changing protocol

   - Add new PCP and APPTRUST attributes to Data Center Bridging

   - Add configuration support for 800Gbps link speed

   - Add devlink port function attribute to enable/disable RoCE and
     migratable

   - Extend devlink-rate to support strict prioriry and weighted fair
     queuing

   - Add devlink support to directly reading from region memory

   - New device tree helper to fetch MAC address from nvmem

   - New big TCP helper to simplify temporary header stripping

  New hardware / drivers:

   - Ethernet:
      - Marvel Octeon CNF95N and CN10KB Ethernet Switches
      - Marvel Prestera AC5X Ethernet Switch
      - WangXun 10 Gigabit NIC
      - Motorcomm yt8521 Gigabit Ethernet
      - Microchip ksz9563 Gigabit Ethernet Switch
      - Microsoft Azure Network Adapter
      - Linux Automation 10Base-T1L adapter

   - PHY:
      - Aquantia AQR112 and AQR412
      - Motorcomm YT8531S

   - PTP:
      - Orolia ART-CARD

   - WiFi:
      - MediaTek Wi-Fi 7 (802.11be) devices
      - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
        devices

   - Bluetooth:
      - Broadcom BCM4377/4378/4387 Bluetooth chipsets
      - Realtek RTL8852BE and RTL8723DS
      - Cypress.CYW4373A0 WiFi + Bluetooth combo device

  Drivers:

   - CAN:
      - gs_usb: bus error reporting support
      - kvaser_usb: listen only and bus error reporting support

   - Ethernet NICs:
      - Intel (100G):
         - extend action skbedit to RX queue mapping
         - implement devlink-rate support
         - support direct read from memory
      - nVidia/Mellanox (mlx5):
         - SW steering improvements, increasing rules update rate
         - Support for enhanced events compression
         - extend H/W offload packet manipulation capabilities
         - implement IPSec packet offload mode
      - nVidia/Mellanox (mlx4):
         - better big TCP support
      - Netronome Ethernet NICs (nfp):
         - IPsec offload support
         - add support for multicast filter
      - Broadcom:
         - RSS and PTP support improvements
      - AMD/SolarFlare:
         - netlink extened ack improvements
         - add basic flower matches to offload, and related stats
      - Virtual NICs:
         - ibmvnic: introduce affinity hint support
      - small / embedded:
         - FreeScale fec: add initial XDP support
         - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
         - TI am65-cpsw: add suspend/resume support
         - Mediatek MT7986: add RX wireless wthernet dispatch support
         - Realtek 8169: enable GRO software interrupt coalescing per
           default

   - Ethernet high-speed switches:
      - Microchip (sparx5):
         - add support for Sparx5 TC/flower H/W offload via VCAP
      - Mellanox mlxsw:
         - add 802.1X and MAC Authentication Bypass offload support
         - add ip6gre support

   - Embedded Ethernet switches:
      - Mediatek (mtk_eth_soc):
         - improve PCS implementation, add DSA untag support
         - enable flow offload support
      - Renesas:
         - add rswitch R-Car Gen4 gPTP support
      - Microchip (lan966x):
         - add full XDP support
         - add TC H/W offload via VCAP
         - enable PTP on bridge interfaces
      - Microchip (ksz8):
         - add MTU support for KSZ8 series

   - Qualcomm 802.11ax WiFi (ath11k):
      - support configuring channel dwell time during scan

   - MediaTek WiFi (mt76):
      - enable Wireless Ethernet Dispatch (WED) offload support
      - add ack signal support
      - enable coredump support
      - remain_on_channel support

   - Intel WiFi (iwlwifi):
      - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
      - 320 MHz channels support

   - RealTek WiFi (rtw89):
      - new dynamic header firmware format support
      - wake-over-WLAN support"

* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
  ipvs: fix type warning in do_div() on 32 bit
  net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
  net: ipa: add IPA v4.7 support
  dt-bindings: net: qcom,ipa: Add SM6350 compatible
  bnxt: Use generic HBH removal helper in tx path
  IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
  selftests: forwarding: Add bridge MDB test
  selftests: forwarding: Rename bridge_mdb test
  bridge: mcast: Support replacement of MDB port group entries
  bridge: mcast: Allow user space to specify MDB entry routing protocol
  bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
  bridge: mcast: Add support for (*, G) with a source list and filter mode
  bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
  bridge: mcast: Add a flag for user installed source entries
  bridge: mcast: Expose __br_multicast_del_group_src()
  bridge: mcast: Expose br_multicast_new_group_src()
  bridge: mcast: Add a centralized error path
  bridge: mcast: Place netlink policy before validation functions
  bridge: mcast: Split (*, G) and (S, G) addition into different functions
  bridge: mcast: Do not derive entry type from its filter mode
  ...

This patch is to use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf
for Team port. This flag will be set in team_port_enter(), which
is called before dev_open(), and cleared in team_port_leave(),
called after dev_close() and the err path in team_port_add().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is a simple mechanical transformation done by:

@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
  (E)

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.

Convert to the regular interface.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/freescale/fec.h
  7b15515fc1ca ("Revert "fec: Restart PPS after link state change"")
  40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/

drivers/pinctrl/pinctrl-ocelot.c
  c297561bc98a ("pinctrl: ocelot: Fix interrupt controller")
  181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration")
https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/

tools/testing/selftests/drivers/net/bonding/Makefile
  bbb774d921e2 ("net: Add tests for bonding and team address list management")
  152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target")
https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/

drivers/net/can/usb/gs_usb.c
  5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition")
  45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support")
https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.

The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former team
ports after a team device has been deleted; see test_LAG_cleanup() in the
last patch in this series.

Add unsync calls at their expected location, team_close().

v3:
* When adding or deleting a port, only sync/unsync addresses if the team
  device is up. In other cases, it is taken care of at the right time by
  ndo_open/ndo_set_rx_mode/ndo_stop.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We had historically not checked that genlmsghdr.reserved
is 0 on input which prevents us from using those precious
bytes in the future.

One use case would be to extend the cmd field, which is
currently just 8 bits wide and 256 is not a lot of commands
for some core families.

To make sure that new families do the right thing by default
put the onus of opting out of validation on existing families.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel)
Signed-off-by: David S. Miller <davem@davemloft.net>