linux-stable.git/drivers/net/sfc/enum.h, branch v3.1

sfc: Allow resets to be upgraded; use atomic ops for safety

2011-06-24T23:43:48+00:00

Currently an attempt to schedule any reset is ignored if a reset
is already pending.  This ignores the relative scopes - if the
requested reset is greater in scope then the scheduled reset should
be upgraded accordingly.

There are also some race conditions which could lead to a reset
request being lost.  Deal with them by using atomic operations on a
bitmask.  This also makes tests on reset_pending easier to get right.

Signed-off-by: Ben Hutchings

sfc: Update version, copyright dates, authors

2009-11-30T01:23:58+00:00

This driver has been mostly rewritten since Michael Brown's initial
work, so swap the order of the authors.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Add support for SFC9000 family (2)

2009-11-30T01:23:57+00:00

This integrates support for the SFC9000 family of 10G Ethernet
controllers and LAN-on-motherboard chips, starting with the SFL9021
'Siena' and SFC9020 'Bethpage'.

Credit for this code is largely due to my colleagues at Solarflare:

   Guido Barzini
   Steve Hodgson
   Kieran Mansley
   Matthew Slattery
   Neil Turton

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Extend loopback mode enumeration

2009-11-30T01:23:53+00:00

New NICs and PHYs support a wider variety of loopback modes.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Log interrupt and reset type names, not numbers

2009-11-24T18:59:04+00:00

Define name tables for these enumerations in a similar way as for
loopback.  Move the loopback name table together with them.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Add support for Solarflare 10Xpress SFT9001

2008-12-13T06:00:17+00:00

Add type codes for the new PHY and rename the SFX7101 type code.

Add definition of clause 22 extension MMD.

Adapt the 10Xpress SFX7101 code to support the SFT9001 as well.
Clean up register definitions.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Add support for sub-10G speeds

2008-12-13T05:58:17+00:00

The SFC4000 has a separate MAC for use at sub-10G speeds.  Introduce
an efx_mac_operations structure with implementations for the two MACs.
Switch between the MACs as necessary.

PHY settings are independent of the MAC, so add get_settings() and
set_settings() to efx_phy_operations.  Also add macs field to indicate
which MACs the PHY is connected to.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Do not reset when hardware monitor detects a fault

2008-11-06T05:50:15+00:00

The TX watchdog should trigger a reset, but a temperature/power alarm
should not as this is unlikely to solve the problem.

Signed-off-by: Ben Hutchings 
Signed-off-by: Jeff Garzik

sfc: Use explicit bool for boolean variables, parameters and return values

2008-09-03T13:53:45+00:00

Replace (cond ? 1 : 0) with cond or !!cond as appropriate, and
(cond ? 0 : 1) with !cond.

Remove some redundant boolean temporaries.

Rename one field that looks like a flag but isn't.

Signed-off-by: Ben Hutchings 
Signed-off-by: Jeff Garzik

[netdrvr] sfc: sfc: Add self-test support

2008-05-13T05:31:44+00:00

Add a set of self-tests accessible thorugh ethtool.
Add hardware loopback and TX disable control code to support them.

Signed-off-by: Ben Hutchings 
Signed-off-by: Jeff Garzik