linux-stable.git/drivers/net/ppp, branch v3.12.56

pppoe: fix reference counting in PPPoE proxy

2016-03-02T15:29:13+00:00

[ Upstream commit 29e73269aa4d36f92b35610c25f8b01c789b0dc8 ]

Drop reference on the relay_po socket when __pppoe_xmit() succeeds.
This is already handled correctly in the error path.

Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

pptp: fix illegal memory access caused by multiple bind()s

2016-03-02T15:29:04+00:00

[ Upstream commit 9a368aff9cb370298fa02feeffa861f2db497c18 ]

Several times already this has been reported as kasan reports caused by
syzkaller and trinity and people always looked at RCU races, but it is
much more simple. :)

In case we bind a pptp socket multiple times, we simply add it to
the callid_sock list but don't remove the old binding. Thus the old
socket stays in the bucket with unused call_id indexes and doesn't get
cleaned up. This causes various forms of kasan reports which were hard
to pinpoint.

Simply don't allow multiple binds and correct error handling in
pptp_bind. Also keep sk_state bits in place in pptp_connect.

Fixes: 00959ade36acad ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Cc: Dmitry Kozlov 
Cc: Sasha Levin 
Cc: Dmitry Vyukov 
Reported-by: Dmitry Vyukov 
Cc: Dave Jones 
Reported-by: Dave Jones 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

ppp, slip: Validate VJ compression slot parameters completely

2016-01-27T08:56:19+00:00

commit 4ab42d78e37a294ac7bc56901d563c642e03c4ae upstream.

Currently slhc_init() treats out-of-range values of rslots and tslots
as equivalent to 0, except that if tslots is too large it will
dereference a null pointer (CVE-2015-7799).

Add a range-check at the top of the function and make it return an
ERR_PTR() on error instead of NULL.  Change the callers accordingly.

Compile-tested only.

Reported-by: 郭永刚 
References: http://article.gmane.org/gmane.comp.security.oss.general/17908
Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

pptp: verify sockaddr_len in pptp_bind() and pptp_connect()

2016-01-05T17:18:01+00:00

[ Upstream commit 09ccfd238e5a0e670d8178cf50180ea81ae09ae1 ]

Reported-by: Dmitry Vyukov 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

ppp: fix pppoe_dev deletion condition in pppoe_release()

2015-11-14T15:48:25+00:00

[ Upstream commit 1acea4f6ce1b1c0941438aca75dd2e5c6b09db60 ]

We can't rely on PPPOX_ZOMBIE to decide whether to clear po->pppoe_dev.
PPPOX_ZOMBIE can be set by pppoe_disc_rcv() even when po->pppoe_dev is
NULL. So we have no guarantee that (sk->sk_state & PPPOX_ZOMBIE) implies
(po->pppoe_dev != NULL).
Since we're releasing a PPPoE socket, we want to release the pppoe_dev
if it exists and reset sk_state to PPPOX_DEAD, no matter the previous
value of sk_state. So we can just check for po->pppoe_dev and avoid any
assumption on sk->sk_state.

Fixes: 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

ppp: don't override sk->sk_state in pppoe_flush_dev()

2015-10-28T15:38:15+00:00

[ Upstream commit e6740165b8f7f06d8caee0fceab3fb9d790a6fed ]

Since commit 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release"),
pppoe_release() calls dev_put(po->pppoe_dev) if sk is in the
PPPOX_ZOMBIE state. But pppoe_flush_dev() can set sk->sk_state to
PPPOX_ZOMBIE _and_ reset po->pppoe_dev to NULL. This leads to the
following oops:

[  570.140800] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e0
[  570.142931] IP: [] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] PGD 3d119067 PUD 3dbc1067 PMD 0
[  570.144601] Oops: 0000 [#1] SMP
[  570.144601] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppoe pppox ppp_generic slhc loop crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper acpi_cpufreq evdev serio_raw processor button ext4 crc16 mbcache jbd2 virtio_net virtio_blk virtio_pci virtio_ring virtio
[  570.144601] CPU: 1 PID: 15738 Comm: ppp-apitest Not tainted 4.2.0 #1
[  570.144601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[  570.144601] task: ffff88003d30d600 ti: ffff880036b60000 task.ti: ffff880036b60000
[  570.144601] RIP: 0010:[]  [] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] RSP: 0018:ffff880036b63e08  EFLAGS: 00010202
[  570.144601] RAX: 0000000000000000 RBX: ffff880034340000 RCX: 0000000000000206
[  570.144601] RDX: 0000000000000006 RSI: ffff88003d30dd20 RDI: ffff88003d30dd20
[  570.144601] RBP: ffff880036b63e28 R08: 0000000000000001 R09: 0000000000000000
[  570.144601] R10: 00007ffee9b50420 R11: ffff880034340078 R12: ffff8800387ec780
[  570.144601] R13: ffff8800387ec7b0 R14: ffff88003e222aa0 R15: ffff8800387ec7b0
[  570.144601] FS:  00007f5672f48700(0000) GS:ffff88003fc80000(0000) knlGS:0000000000000000
[  570.144601] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  570.144601] CR2: 00000000000004e0 CR3: 0000000037f7e000 CR4: 00000000000406a0
[  570.144601] Stack:
[  570.144601]  ffffffffa018f240 ffff8800387ec780 ffffffffa018f240 ffff8800387ec7b0
[  570.144601]  ffff880036b63e48 ffffffff812caabe ffff880039e4e000 0000000000000008
[  570.144601]  ffff880036b63e58 ffffffff812cabad ffff880036b63ea8 ffffffff811347f5
[  570.144601] Call Trace:
[  570.144601]  [] sock_release+0x1a/0x75
[  570.144601]  [] sock_close+0xd/0x11
[  570.144601]  [] __fput+0xff/0x1a5
[  570.144601]  [] ____fput+0x9/0xb
[  570.144601]  [] task_work_run+0x66/0x90
[  570.144601]  [] prepare_exit_to_usermode+0x8c/0xa7
[  570.144601]  [] syscall_return_slowpath+0x16d/0x19b
[  570.144601]  [] int_ret_from_sys_call+0x25/0x9f
[  570.144601] Code: 48 8b 83 c8 01 00 00 a8 01 74 12 48 89 df e8 8b 27 14 e1 b8 f7 ff ff ff e9 b7 00 00 00 8a 43 12 a8 0b 74 1c 48 8b 83 a8 04 00 00 <48> 8b 80 e0 04 00 00 65 ff 08 48 c7 83 a8 04 00 00 00 00 00 00
[  570.144601] RIP  [] pppoe_release+0x50/0x101 [pppoe]
[  570.144601]  RSP 
[  570.144601] CR2: 00000000000004e0
[  570.200518] ---[ end trace 46956baf17349563 ]---

pppoe_flush_dev() has no reason to override sk->sk_state with
PPPOX_ZOMBIE. pppox_unbind_sock() already sets sk->sk_state to
PPPOX_DEAD, which is the correct state given that sk is unbound and
po->pppoe_dev is NULL.

Fixes: 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
Tested-by: Oleksii Berezhniak 
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

ppp: deflate: never return len larger than output buffer

2015-02-10T10:16:52+00:00

[ Upstream commit e2a4800e75780ccf4e6c2487f82b688ba736eb18 ]

When we've run out of space in the output buffer to store more data, we
will call zlib_deflate with a NULL output buffer until we've consumed
remaining input.

When this happens, olen contains the size the output buffer would have
consumed iff we'd have had enough room.

This can later cause skb_over_panic when ppp_generic skb_put()s
the returned length.

Reported-by: Iain Douglas 
Signed-off-by: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

pptp: fix stack info leak in pptp_getname()

2014-11-27T10:14:06+00:00

[ Upstream commit a5f6fc28d6e6cc379c6839f21820e62262419584 ]

pptp_getname() only partially initializes the stack variable sa,
particularly only fills the pptp part of the sa_addr union. The code
thereby discloses 16 bytes of kernel stack memory via getsockname().

Fix this by memset(0)'ing the union before.

Cc: Dmitry Kozlov 
Signed-off-by: Mathias Krause 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

fix misuses of f_count() in ppp and netlink

2014-11-13T18:02:16+00:00

commit 24dff96a37a2ca319e75a74d3929b2de22447ca6 upstream.

we used to check for "nobody else could start doing anything with
that opened file" by checking that refcount was 2 or less - one
for descriptor table and one we'd acquired in fget() on the way to
wherever we are.  That was race-prone (somebody else might have
had a reference to descriptor table and do fget() just as we'd
been checking) and it had become flat-out incorrect back when
we switched to fget_light() on those codepaths - unlike fget(),
it doesn't grab an extra reference unless the descriptor table
is shared.  The same change allowed a race-free check, though -
we are safe exactly when refcount is less than 2.

It was a long time ago; pre-2.6.12 for ioctl() (the codepath leading
to ppp one) and 2.6.17 for sendmsg() (netlink one).  OTOH,
netlink hadn't grown that check until 3.9 and ppp used to live
in drivers/net, not drivers/net/ppp until 3.1.  The bug existed
well before that, though, and the same fix used to apply in old
location of file.

Signed-off-by: Al Viro 
Signed-off-by: Jiri Slaby

inetpeer: get rid of ip_id_count

2014-08-19T15:15:00+00:00

[ Upstream commit 73f156a6e8c1074ac6327e0abd1169e95eb66463 ]

Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby