linux-stable.git/drivers/net/phy, branch v6.7

net: phy: skip LED triggers on PHYs on SFP modules

2023-12-16T01:53:42+00:00

Calling led_trigger_register() when attaching a PHY located on an SFP
module potentially (and practically) leads into a deadlock.
Fix this by not calling led_trigger_register() for PHYs localted on SFP
modules as such modules actually never got any LEDs.

======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4-next-20231208+ #0 Tainted: G           O
------------------------------------------------------
kworker/u8:2/43 is trying to acquire lock:
ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8

but task is already holding lock:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&sfp->sm_mutex){+.+.}-{3:3}:
       __mutex_lock+0x88/0x7a0
       mutex_lock_nested+0x20/0x28
       cleanup_module+0x2ae0/0x3120 [sfp]
       sfp_register_bus+0x5c/0x9c
       sfp_register_socket+0x48/0xd4
       cleanup_module+0x271c/0x3120 [sfp]
       platform_probe+0x64/0xb8
       really_probe+0x17c/0x3c0
       __driver_probe_device+0x78/0x164
       driver_probe_device+0x3c/0xd4
       __driver_attach+0xec/0x1f0
       bus_for_each_dev+0x60/0xa0
       driver_attach+0x20/0x28
       bus_add_driver+0x108/0x208
       driver_register+0x5c/0x118
       __platform_driver_register+0x24/0x2c
       init_module+0x28/0xa7c [sfp]
       do_one_initcall+0x70/0x2ec
       do_init_module+0x54/0x1e4
       load_module+0x1b78/0x1c8c
       __do_sys_init_module+0x1bc/0x2cc
       __arm64_sys_init_module+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #2 (rtnl_mutex){+.+.}-{3:3}:
       __mutex_lock+0x88/0x7a0
       mutex_lock_nested+0x20/0x28
       rtnl_lock+0x18/0x20
       set_device_name+0x30/0x130
       netdev_trig_activate+0x13c/0x1ac
       led_trigger_set+0x118/0x234
       led_trigger_write+0x104/0x17c
       sysfs_kf_bin_write+0x64/0x80
       kernfs_fop_write_iter+0x128/0x1b4
       vfs_write+0x178/0x2a4
       ksys_write+0x58/0xd4
       __arm64_sys_write+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #1 (&led_cdev->trigger_lock){++++}-{3:3}:
       down_write+0x4c/0x13c
       led_trigger_write+0xf8/0x17c
       sysfs_kf_bin_write+0x64/0x80
       kernfs_fop_write_iter+0x128/0x1b4
       vfs_write+0x178/0x2a4
       ksys_write+0x58/0xd4
       __arm64_sys_write+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #0 (triggers_list_lock){++++}-{3:3}:
       __lock_acquire+0x12a0/0x2014
       lock_acquire+0x100/0x2ac
       down_write+0x4c/0x13c
       led_trigger_register+0x4c/0x1a8
       phy_led_triggers_register+0x9c/0x214
       phy_attach_direct+0x154/0x36c
       phylink_attach_phy+0x30/0x60
       phylink_sfp_connect_phy+0x140/0x510
       sfp_add_phy+0x34/0x50
       init_module+0x15c/0xa7c [sfp]
       cleanup_module+0x1d94/0x3120 [sfp]
       cleanup_module+0x2bb4/0x3120 [sfp]
       process_one_work+0x1f8/0x4ec
       worker_thread+0x1e8/0x3d8
       kthread+0x104/0x110
       ret_from_fork+0x10/0x20

other info that might help us debug this:

Chain exists of:
  triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sfp->sm_mutex);
                               lock(rtnl_mutex);
                               lock(&sfp->sm_mutex);
  lock(triggers_list_lock);

 *** DEADLOCK ***

4 locks held by kworker/u8:2/43:
 #0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
 #1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
 #2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20
 #3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]

stack backtrace:
CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G           O       6.7.0-rc4-next-20231208+ #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: events_power_efficient cleanup_module [sfp]
Call trace:
 dump_backtrace+0xa8/0x10c
 show_stack+0x14/0x1c
 dump_stack_lvl+0x5c/0xa0
 dump_stack+0x14/0x1c
 print_circular_bug+0x328/0x430
 check_noncircular+0x124/0x134
 __lock_acquire+0x12a0/0x2014
 lock_acquire+0x100/0x2ac
 down_write+0x4c/0x13c
 led_trigger_register+0x4c/0x1a8
 phy_led_triggers_register+0x9c/0x214
 phy_attach_direct+0x154/0x36c
 phylink_attach_phy+0x30/0x60
 phylink_sfp_connect_phy+0x140/0x510
 sfp_add_phy+0x34/0x50
 init_module+0x15c/0xa7c [sfp]
 cleanup_module+0x1d94/0x3120 [sfp]
 cleanup_module+0x2bb4/0x3120 [sfp]
 process_one_work+0x1f8/0x4ec
 worker_thread+0x1e8/0x3d8
 kthread+0x104/0x110
 ret_from_fork+0x10/0x20

Signed-off-by: Daniel Golle 
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski

net: phylink: initialize carrier state at creation

2023-11-07T22:32:23+00:00

Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus;
SFP module is present, but no fiber connected, so definitely no carrier.

After booting, eth2 is down, but netdev LED trigger surprisingly reports
link active. Then, after "ip link set eth2 up", the link indicator goes
away - as I would have expected it from the beginning.

It turns out, that the default carrier state after netdev creation is
"carrier ok". Some ethernet drivers explicitly call netif_carrier_off
during probing, others (like mvneta) don't - which explains the current
behaviour: only when the device is brought up, phylink_start calls
netif_carrier_off.

Fix this for all drivers using phylink, by calling netif_carrier_off in
phylink_create.

Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Cc: stable@vger.kernel.org
Suggested-by: Andrew Lunn 
Signed-off-by: Klaus Kudielka 
Reviewed-by: Russell King (Oracle) 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: fill in missing MODULE_DESCRIPTION()s

2023-11-02T04:50:56+00:00

W=1 builds now warn if a module is built without a
MODULE_DESCRIPTION(). Fill them in based on the Kconfig text, or
similar.

Signed-off-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Acked-by: Russell King (Oracle) 
Link: https://lore.kernel.org/r/20231028184458.99448-2-andrew@lunn.ch
Signed-off-by: Jakub Kicinski

net: phy: micrel: Fix forced link mode for KSZ886X switches

2023-10-20T10:50:46+00:00

Address a link speed detection issue in KSZ886X PHY driver when in
forced link mode. Previously, link partners like "ASIX AX88772B"
with KSZ8873 could fall back to 10Mbit instead of configured 100Mbit.

The issue arises as KSZ886X PHY continues sending Fast Link Pulses (FLPs)
even with autonegotiation off, misleading link partners in autoneg mode,
leading to incorrect link speed detection.

Now, when autonegotiation is disabled, the driver sets the link state
forcefully using KSZ886X_CTRL_FORCE_LINK bit. This action, beyond just
disabling autonegotiation, makes the PHY state more reliably detected by
link partners using parallel detection, thus fixing the link speed
misconfiguration.

With autonegotiation enabled, link state is not forced, allowing proper
autonegotiation process participation.

Signed-off-by: Oleksij Rempel 
Reviewed-by: Vladimir Oltean 
Reviewed-by: Divya Koppera 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-10-19T20:29:01+00:00

Cross-merge networking fixes after downstream PR.

net/mac80211/key.c
  02e0e426a2fb ("wifi: mac80211: fix error path key leak")
  2a8b665e6bcc ("wifi: mac80211: remove key_mtx")
  7d6904bf26b9 ("Merge wireless into wireless-next")
https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/

Adjacent changes:

drivers/net/ethernet/ti/Kconfig
  a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object")
  98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal")

Signed-off-by: Jakub Kicinski

net: phy: bcm7xxx: Add missing 16nm EPHY statistics

2023-10-19T01:13:13+00:00

The .probe() function would allocate the necessary space and ensure that
the library call sizes the number of statistics but the callbacks
necessary to fetch the name and values were not wired up.

Reported-by: Justin Chen 
Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Reviewed-by: Andrew Lunn 
Signed-off-by: Florian Fainelli 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20231017205119.416392-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski

net: phylink: remove a bunch of unused validation methods

2023-10-18T00:51:53+00:00

Remove exports for phylink_caps_to_linkmodes(),
phylink_get_capabilities(), phylink_validate_mask_caps() and
phylink_generic_validate(). Also, as phylink_generic_validate() is no
longer called, we can remove its implementation as well.

Signed-off-by: Russell King (Oracle) 
Link: https://lore.kernel.org/r/E1qsPkK-009wip-W9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski

net: phylink: remove .validate() method

2023-10-18T00:51:53+00:00

The MAC .validate() method is no longer used, so remove it from the
phylink_mac_ops structure, and remove the callsite in
phylink_validate_mac_and_pcs().

Signed-off-by: Russell King (Oracle) 
Link: https://lore.kernel.org/r/E1qsPkF-009wij-QM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski

net: phylink: provide mac_get_caps() method

2023-10-18T00:51:02+00:00

Provide a new method, mac_get_caps() to get the MAC capabilities for
the specified interface mode. This is for MACs which have special
requirements, such as not supporting half-duplex in certain interface
modes, and will replace the validate() method.

Signed-off-by: Russell King (Oracle) 
Link: https://lore.kernel.org/r/E1qsPk5-009wiX-G5@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski

net: phy: smsc: replace deprecated strncpy with ethtool_sprintf

2023-10-16T23:15:00+00:00

strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this dedicated helper function.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-phy-smsc-c-v1-1-00528f7524b3@google.com
Signed-off-by: Jakub Kicinski