linux-stable.git/drivers/net/phy, branch v6.3.7 Linux kernel stable tree net: phy: mxl-gpy: extend interrupt fix to all impacted variants 2023-06-09T08:47:56+00:00 Xu Liang lxu@maxlinear.com 2023-05-31T07:48:22+00:00 c9e14b19e30067d63427812a31ddaaa422a4fa6e [ Upstream commit 519d6487640835d19461817c75907e6308074a73 ] The interrupt fix in commit 97a89ed101bb should be applied on all variants of GPY2xx PHY and GPY115C. Fixes: 97a89ed101bb ("net: phy: mxl-gpy: disable interrupts on GPY215 by default") Signed-off-by: Xu Liang <lxu@maxlinear.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230531074822.39136-1-lxu@maxlinear.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 519d6487640835d19461817c75907e6308074a73 ]

The interrupt fix in commit 97a89ed101bb should be applied on all variants
of GPY2xx PHY and GPY115C.

Fixes: 97a89ed101bb ("net: phy: mxl-gpy: disable interrupts on GPY215 by default")
Signed-off-by: Xu Liang <lxu@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230531074822.39136-1-lxu@maxlinear.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: mscc: enable VSC8501/2 RGMII RX clock 2023-06-05T07:29:45+00:00 David Epping david.epping@missinglinkelectronics.com 2023-05-23T15:31:08+00:00 ec249ed0e42a30a9cda962dd6d47a8304223dede [ Upstream commit 71460c9ec5c743e9ffffca3c874d66267c36345e ] By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is disabled. To allow packet forwarding towards the MAC it needs to be enabled. For other PHYs supported by this driver the clock output is enabled by default. Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 71460c9ec5c743e9ffffca3c874d66267c36345e ]

By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is
disabled. To allow packet forwarding towards the MAC it needs to be
enabled.

For other PHYs supported by this driver the clock output is enabled
by default.

Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502")
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE 2023-05-30T13:17:28+00:00 David Epping david.epping@missinglinkelectronics.com 2023-05-23T15:31:05+00:00 449d44461a04b411e77fe16a194b3344a7e293ed commit 57fb54ab9f6945e204740b696bd4cee61ee04e5e upstream. The mscc driver implements support for VSC8502, so its ID should be in the MODULE_DEVICE_TABLE for automatic loading. Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 57fb54ab9f6945e204740b696bd4cee61ee04e5e upstream.

The mscc driver implements support for VSC8502, so its ID should be in
the MODULE_DEVICE_TABLE for automatic loading.

Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: phy: dp83867: add w/a for packet errors seen with short cables 2023-05-24T16:30:14+00:00 Grygorii Strashko grygorii.strashko@ti.com 2023-05-10T12:51:39+00:00 ce4e77f2dcf0eb30afabeaa0e41aab2bc3f6aacf [ Upstream commit 0b01db274028f5acd207332686ffc92ac77491ac ] Introduce the W/A for packet errors seen with short cables (<1m) between two DP83867 PHYs. The W/A recommended by DM requires FFE Equalizer Configuration tuning by writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard and soft resets as follows: write_reg(0x001F, 0x8000); //hard reset write_reg(DSP_FFE_CFG, 0x0E81); write_reg(0x001F, 0x4000); //soft reset Since DP83867 PHY DM says "Changing this register to 0x0E81, will not affect Long Cable performance.", enable the W/A by default. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0b01db274028f5acd207332686ffc92ac77491ac ]

Introduce the W/A for packet errors seen with short cables (<1m) between
two DP83867 PHYs.

The W/A recommended by DM requires FFE Equalizer Configuration tuning by
writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard
and soft resets as follows:

write_reg(0x001F, 0x8000); //hard reset
write_reg(DSP_FFE_CFG, 0x0E81);
write_reg(0x001F, 0x4000); //soft reset

Since  DP83867 PHY DM says "Changing this register to 0x0E81, will not
affect Long Cable performance.", enable the W/A by default.

Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: bcm7xx: Correct read from expansion register 2023-05-24T16:29:58+00:00 Florian Fainelli f.fainelli@gmail.com 2023-05-08T23:17:49+00:00 31b2c10eee2bf2dbee4b9a8998b64ab71f3e1fd5 [ Upstream commit 582dbb2cc1a0a7427840f5b1e3c65608e511b061 ] Since the driver works in the "legacy" addressing mode, we need to write to the expansion register (0x17) with bits 11:8 set to 0xf to properly select the expansion register passed as argument. Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230508231749.1681169-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 582dbb2cc1a0a7427840f5b1e3c65608e511b061 ]

Since the driver works in the "legacy" addressing mode, we need to write
to the expansion register (0x17) with bits 11:8 set to 0xf to properly
select the expansion register passed as argument.

Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230508231749.1681169-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: nxp-c45-tja11xx: add remove callback 2023-04-11T13:28:31+00:00 Radu Pirea (OSS) radu-nicolae.pirea@oss.nxp.com 2023-04-06T09:59:04+00:00 a4506722dc39ca840593f14e3faa4c9ba9408211 Unregister PTP clock when the driver is removed. Purge the RX and TX skb queues. Fixes: 514def5dd339 ("phy: nxp-c45-tja11xx: add timestamping support") CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230406095904.75456-1-radu-nicolae.pirea@oss.nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Unregister PTP clock when the driver is removed.
Purge the RX and TX skb queues.

Fixes: 514def5dd339 ("phy: nxp-c45-tja11xx: add timestamping support")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230406095904.75456-1-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: sfp: avoid EEPROM read of absent SFP module 2023-04-09T15:01:28+00:00 Ivan Bornyakov i.bornyakov@metrotek.ru 2023-04-06T13:08:33+00:00 bef227c1537cb8005311c0842bc5449e8c7a5973 If SFP module is not present, it is sensible to fail sfp_module_eeprom() and sfp_module_eeprom_by_page() early to avoid excessive I2C transfers which are garanteed to fail. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
If SFP module is not present, it is sensible to fail sfp_module_eeprom()
and sfp_module_eeprom_by_page() early to avoid excessive I2C transfers
which are garanteed to fail.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: sfp: initialize sfp->i2c_block_size at sfp allocation 2023-04-09T15:01:28+00:00 Ivan Bornyakov i.bornyakov@metrotek.ru 2023-04-06T13:08:32+00:00 813c2dd78618f108fdcf9cd726ea90f081ee2881 sfp->i2c_block_size is initialized at SFP module insertion in sfp_sm_mod_probe(). Because of that, if SFP module was never inserted since boot, sfp_read() call will lead to zero-length I2C read attempt, and not all I2C controllers are happy with zero-length reads. One way to issue sfp_read() on empty SFP cage is to execute ethtool -m. If SFP module was never plugged since boot, there will be a zero-length I2C read attempt. # ethtool -m xge0 i2c i2c-3: adapter quirk: no zero length (addr 0x0050, size 0, read) Cannot get Module EEPROM data: Operation not supported If SFP module was plugged then removed at least once, sfp->i2c_block_size will be initialized and ethtool -m will fail with different exit code and without I2C error # ethtool -m xge0 Cannot get Module EEPROM data: Remote I/O error Fix this by initializing sfp->i2_block_size at struct sfp allocation stage so no wild sfp_read() could issue zero-length I2C read. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
sfp->i2c_block_size is initialized at SFP module insertion in
sfp_sm_mod_probe(). Because of that, if SFP module was never inserted
since boot, sfp_read() call will lead to zero-length I2C read attempt,
and not all I2C controllers are happy with zero-length reads.

One way to issue sfp_read() on empty SFP cage is to execute ethtool -m.
If SFP module was never plugged since boot, there will be a zero-length
I2C read attempt.

  # ethtool -m xge0
  i2c i2c-3: adapter quirk: no zero length (addr 0x0050, size 0, read)
  Cannot get Module EEPROM data: Operation not supported

If SFP module was plugged then removed at least once,
sfp->i2c_block_size will be initialized and ethtool -m will fail with
different exit code and without I2C error

  # ethtool -m xge0
  Cannot get Module EEPROM data: Remote I/O error

Fix this by initializing sfp->i2_block_size at struct sfp allocation
stage so no wild sfp_read() could issue zero-length I2C read.

Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround")
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: nxp-c45-tja11xx: fix unsigned long multiplication overflow 2023-04-08T02:48:34+00:00 Radu Pirea (OSS) radu-nicolae.pirea@oss.nxp.com 2023-04-06T09:59:53+00:00 bdaaecc127d471c422ee9e994978617c8aa79e1e Any multiplication between GENMASK(31, 0) and a number bigger than 1 will be truncated because of the overflow, if the size of unsigned long is 32 bits. Replaced GENMASK with GENMASK_ULL to make sure that multiplication will be between 64 bits values. Cc: <stable@vger.kernel.org> # 5.15+ Fixes: 514def5dd339 ("phy: nxp-c45-tja11xx: add timestamping support") Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230406095953.75622-1-radu-nicolae.pirea@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Any multiplication between GENMASK(31, 0) and a number bigger than 1
will be truncated because of the overflow, if the size of unsigned long
is 32 bits.

Replaced GENMASK with GENMASK_ULL to make sure that multiplication will
be between 64 bits values.

Cc: <stable@vger.kernel.org> # 5.15+
Fixes: 514def5dd339 ("phy: nxp-c45-tja11xx: add timestamping support")
Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230406095953.75622-1-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: sfp: add quirk enabling 2500Base-x for HG MXPD-483II 2023-04-03T09:01:17+00:00 Daniel Golle daniel@makrotopia.org 2023-04-02T11:44:37+00:00 ad651d68cee75e9ac20002254c4e5d09ee67a84b The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X, however, in their EEPROM they incorrectly specify: Transceiver type : Ethernet: 1000BASE-LX ... BR, Nominal : 2600MBd Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway. https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60 Reported-by: chowtom <chowtom@gmail.com> Tested-by: chowtom <chowtom@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 
The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
    Transceiver type                          : Ethernet: 1000BASE-LX
    ...
    BR, Nominal                               : 2600MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.

https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60

Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>