linux-stable.git/drivers/net/phy, branch v5.11.4 Linux kernel stable tree net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant 2021-03-07T11:35:50+00:00 Pali Rohár pali@kernel.org 2021-01-25T15:02:28+00:00 30bcf562b575de88364c4320195f6e753458693f [ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ] The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information stored in its EEPROM. It claims to support all transceiver types including 10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is the only one supported. This module has also phys_id set to SFF, and the SFP subsystem currently does not allow to use SFP modules detected as SFFs. Add exception for this module so it can be detected as supported. This change finally allows to detect and use SFP GPON module Ubiquiti U-Fiber Instant on Linux system. EEPROM content of this SFP module is (where XX is serial number): 00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8 ???........??.?? 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20 ....UBNT 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41 .??)UF-INSTA 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36 NT 4 ??.6 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX .?..UBNTXXXXXXXX 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41 140123 `??A Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ]

The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information
stored in its EEPROM. It claims to support all transceiver types including
10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is
the only one supported.

This module has also phys_id set to SFF, and the SFP subsystem currently
does not allow to use SFP modules detected as SFFs. Add exception for this
module so it can be detected as supported.

This change finally allows to detect and use SFP GPON module Ubiquiti
U-Fiber Instant on Linux system.

EEPROM content of this SFP module is (where XX is serial number):

00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8    ???........??.??
10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20    ....UBNT
20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41        .??)UF-INSTA
30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36    NT      4   ??.6
40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX    .?..UBNTXXXXXXXX
50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41        140123  `??A

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081 2021-03-04T11:15:14+00:00 Christian Melki christian.melki@t2data.com 2021-02-24T20:55:36+00:00 9e4ade4860d06473040e66f8314b2a3478fad900 [ Upstream commit 764d31cacfe48440745c4bbb55a62ac9471c9f19 ] Following a similar reinstate for the KSZ9031. Older kernels would use the genphy_soft_reset if the PHY did not implement a .soft_reset. Bluntly removing that default may expose a lot of situations where various PHYs/board implementations won't recover on various changes. Like with this implementation during a 4.9.x to 5.4.x LTS transition. I think it's a good thing to remove unwanted soft resets but wonder if it did open a can of worms? Atleast this fixes one iMX6 FEC/RMII/8081 combo. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Christian Melki <christian.melki@t2data.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210224205536.9349-1-christian.melki@t2data.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 764d31cacfe48440745c4bbb55a62ac9471c9f19 ]

Following a similar reinstate for the KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.

Bluntly removing that default may expose a lot of situations where various
PHYs/board implementations won't recover on various changes.
Like with this implementation during a 4.9.x to 5.4.x LTS transition.
I think it's a good thing to remove unwanted soft resets but wonder if it
did open a can of worms?

Atleast this fixes one iMX6 FEC/RMII/8081 combo.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Christian Melki <christian.melki@t2data.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224205536.9349-1-christian.melki@t2data.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: mscc: coma mode disabled for VSC8514 2021-03-04T11:14:04+00:00 Bjarni Jonasson bjarni.jonasson@microchip.com 2021-02-16T15:29:44+00:00 4d97d9ebe73846d18c8e1fd145a602bf8a1995d6 [ Upstream commit ca0d7fd0a58dfc9503775dae7daee341c115e0c7 ] The 'coma mode' (configurable through sw or hw) provides an optional feature that may be used to control when the PHYs become active. The typical usage is to synchronize the link-up time across all PHY instances. This patch releases coma mode if not done by hardware, otherwise the phys will not link-up. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ca0d7fd0a58dfc9503775dae7daee341c115e0c7 ]

The 'coma mode' (configurable through sw or hw) provides an
optional feature that may be used to control when the PHYs become active.
The typical usage is to synchronize the link-up time across
all PHY instances. This patch releases coma mode if not done by hardware,
otherwise the phys will not link-up.

Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.")
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: mscc: improved serdes calibration applied to VSC8514 2021-03-04T11:14:04+00:00 Bjarni Jonasson bjarni.jonasson@microchip.com 2021-02-16T15:29:43+00:00 72e17930cdd5a03f8ff13883966bf140f15f5d4d [ Upstream commit 85e97f0b984eb36cba0ecaf87c66a9f7445d73dc ] The current IB serdes calibration algorithm (performed by the onboard 8051) has proven to be unstable for the VSC8514 QSGMII phy. A new algorithm has been developed based on 'Frequency-offset Jittered-Injection' or 'FoJi' method which solves all known issues. This patch disables the 8051 algorithm and replaces it with the new FoJi algorithm. The calibration is now performed in a new file (mscc_serdes.c), which can act as an placeholder for future serdes configurations. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 85e97f0b984eb36cba0ecaf87c66a9f7445d73dc ]

The current IB serdes calibration algorithm (performed by the onboard 8051)
has proven to be unstable for the VSC8514 QSGMII phy.
A new algorithm has been developed based on
'Frequency-offset Jittered-Injection' or 'FoJi' method which solves
all known issues.  This patch disables the 8051 algorithm and
replaces it with the new FoJi algorithm.
The calibration is now performed in a new file (mscc_serdes.c),
which can act as an placeholder for future serdes configurations.

Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.")
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips 2021-03-04T11:14:02+00:00 Pali Rohár pali@kernel.org 2021-01-25T15:02:27+00:00 fb2436e247b656326b8c24a0fa28cbe043d73296 [ Upstream commit 426c6cbc409cbda9ab1a9dbf15d3c2ef947eb8c1 ] The workaround for VSOL V2801F brand based GPON SFP modules added in commit 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") works only for IDs added explicitly to the list. Since there are rebranded modules where OEM vendors put different strings into the vendor name field, we cannot base workaround on IDs only. Moreover the issue which the above mentioned commit tried to work around is generic not only to VSOL based modules, but rather to all GPON modules based on Realtek RTL8672 and RTL9601C chips. These include at least the following GPON modules: * V-SOL V2801F * C-Data FD511GX-RM0 * OPTON GP801R * BAUDCOM BD-1234-SFM * CPGOS03-0490 v2.0 * Ubiquiti U-Fiber Instant * EXOT EGS1 These Realtek chips have broken EEPROM emulator which for N-byte read operation returns just the first byte of EEPROM data, followed by N-1 zeros. Introduce a new function, sfp_id_needs_byte_io(), which detects SFP modules with broken EEPROM emulator based on N-1 zeros and switch to 1 byte EEPROM reading operation. Function sfp_i2c_read() now always uses single byte reading when it is required and when function sfp_hwmon_probe() detects single byte access, it disables registration of hwmon device, because in this case we cannot reliably and atomically read 2 bytes as is required by the standard for retrieving values from diagnostic area. (These Realtek chips are broken in a way that violates SFP standards for diagnostic interface. Kernel in this case simply cannot do anything less of skipping registration of the hwmon interface.) This patch fixes reading of EEPROM content from SFP modules based on Realtek RTL8672 and RTL9601C chips. Diagnostic interface of EEPROM stays broken and cannot be fixed. Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") Co-developed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 426c6cbc409cbda9ab1a9dbf15d3c2ef947eb8c1 ]

The workaround for VSOL V2801F brand based GPON SFP modules added in commit
0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0
workaround") works only for IDs added explicitly to the list. Since there
are rebranded modules where OEM vendors put different strings into the
vendor name field, we cannot base workaround on IDs only.

Moreover the issue which the above mentioned commit tried to work around is
generic not only to VSOL based modules, but rather to all GPON modules
based on Realtek RTL8672 and RTL9601C chips.

These include at least the following GPON modules:
* V-SOL V2801F
* C-Data FD511GX-RM0
* OPTON GP801R
* BAUDCOM BD-1234-SFM
* CPGOS03-0490 v2.0
* Ubiquiti U-Fiber Instant
* EXOT EGS1

These Realtek chips have broken EEPROM emulator which for N-byte read
operation returns just the first byte of EEPROM data, followed by N-1
zeros.

Introduce a new function, sfp_id_needs_byte_io(), which detects SFP modules
with broken EEPROM emulator based on N-1 zeros and switch to 1 byte EEPROM
reading operation.

Function sfp_i2c_read() now always uses single byte reading when it is
required and when function sfp_hwmon_probe() detects single byte access,
it disables registration of hwmon device, because in this case we cannot
reliably and atomically read 2 bytes as is required by the standard for
retrieving values from diagnostic area.

(These Realtek chips are broken in a way that violates SFP standards for
diagnostic interface. Kernel in this case simply cannot do anything less
of skipping registration of the hwmon interface.)

This patch fixes reading of EEPROM content from SFP modules based on
Realtek RTL8672 and RTL9601C chips. Diagnostic interface of EEPROM stays
broken and cannot be fixed.

Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround")
Co-developed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: mscc: adding LCPLL reset to VSC8514 2021-03-04T11:13:57+00:00 Bjarni Jonasson bjarni.jonasson@microchip.com 2021-02-16T15:29:42+00:00 486f5e4d9d33f14d11b4e3446819091a9e1a39ed [ Upstream commit 3cc2c646be0b22037f31c958e96c0544a073d108 ] At Power-On Reset, transients may cause the LCPLL to lock onto a clock that is momentarily unstable. This is normally seen in QSGMII setups where the higher speed 6G SerDes is being used. This patch adds an initial LCPLL Reset to the PHY (first instance) to avoid this issue. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3cc2c646be0b22037f31c958e96c0544a073d108 ]

At Power-On Reset, transients may cause the LCPLL to lock onto a
clock that is momentarily unstable. This is normally seen in QSGMII
setups where the higher speed 6G SerDes is being used.
This patch adds an initial LCPLL Reset to the PHY (first instance)
to avoid this issue.

Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.")
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: consider that suspend2ram may cut off PHY power 2021-03-04T11:13:51+00:00 Heiner Kallweit hkallweit1@gmail.com 2021-02-11T21:32:52+00:00 b84ee271c65efbb51d359231b084a8f93fd41c30 [ Upstream commit 4c0d2e96ba055bd8911bb8287def4f8ebbad15b6 ] Claudiu reported that on his system S2R cuts off power to the PHY and after resuming certain PHY settings are lost. The PM folks confirmed that cutting off power to selected components in S2R is a valid case. Therefore resuming from S2R, same as from hibernation, has to assume that the PHY has power-on defaults. As a consequence use the restore callback also as resume callback. In addition make sure that the interrupt configuration is restored. Let's do this in phy_init_hw() and ensure that after this call actual interrupt configuration is in sync with phydev->interrupts. Currently, if interrupt was enabled before hibernation, we would resume with interrupt disabled because that's the power-on default. This fix applies cleanly only after the commit marked as fixed. I don't have an affected system, therefore change is compile-tested only. [0] https://lore.kernel.org/netdev/1610120754-14331-1-git-send-email-claudiu.beznea@microchip.com/ Fixes: 611d779af7ca ("net: phy: fix MDIO bus PM PHY resuming") Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4c0d2e96ba055bd8911bb8287def4f8ebbad15b6 ]

Claudiu reported that on his system S2R cuts off power to the PHY and
after resuming certain PHY settings are lost. The PM folks confirmed
that cutting off power to selected components in S2R is a valid case.
Therefore resuming from S2R, same as from hibernation, has to assume
that the PHY has power-on defaults. As a consequence use the restore
callback also as resume callback.
In addition make sure that the interrupt configuration is restored.
Let's do this in phy_init_hw() and ensure that after this call
actual interrupt configuration is in sync with phydev->interrupts.
Currently, if interrupt was enabled before hibernation, we would
resume with interrupt disabled because that's the power-on default.

This fix applies cleanly only after the commit marked as fixed.

I don't have an affected system, therefore change is compile-tested
only.

[0] https://lore.kernel.org/netdev/1610120754-14331-1-git-send-email-claudiu.beznea@microchip.com/

Fixes: 611d779af7ca ("net: phy: fix MDIO bus PM PHY resuming")
Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: smsc: fix clk error handling 2021-01-13T02:39:19+00:00 Marco Felsch m.felsch@pengutronix.de 2021-01-11T08:59:32+00:00 a18caa97b1bda0a3d126a7be165ddcfc56c2dde6 Commit bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") added the phy clk support. The commit already checks if clk_get_optional() throw an error but instead of returning the error it ignores it. Fixes: bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210111085932.28680-1-m.felsch@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Commit bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in
support") added the phy clk support. The commit already checks if
clk_get_optional() throw an error but instead of returning the error it
ignores it.

Fixes: bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210111085932.28680-1-m.felsch@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: sfp: relax bitrate-derived mode check 2020-12-10T03:38:10+00:00 Russell King rmk+kernel@armlinux.org.uk 2020-12-09T11:22:54+00:00 7a77233ec6d114322e2c4f71b4e26dbecd9ea8a7 Do not check the encoding when deriving 1000BASE-X from the bitrate when no other modes are discovered. Some GPON modules (VSOL V2801F and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a 1200Mbaud bitrate, but should be driven with 1000BASE-X on the host side. Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 
Do not check the encoding when deriving 1000BASE-X from the bitrate
when no other modes are discovered. Some GPON modules (VSOL V2801F
and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a
1200Mbaud bitrate, but should be driven with 1000BASE-X on the host
side.

Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround 2020-12-10T03:38:10+00:00 Russell King rmk+kernel@armlinux.org.uk 2020-12-09T11:22:49+00:00 0d035bed2a4a6c4878518749348be61bf082d12a Add a workaround for the detection of VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 GPON module which CarlitoxxPro states needs single byte I2C reads to the EEPROM. Pali Rohár reports that he also has a CarlitoxxPro-based V2801F module, which reports a manufacturer of "OEM". This manufacturer can't be matched as it appears in many different modules, so also match the part number too. Reported-by: Thomas Schreiber <tschreibe@gmail.com> Reported-by: Pali Rohár <pali@kernel.org> Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add a workaround for the detection of VSOL V2801F / CarlitoxxPro
CPGOS03-0490 v2.0 GPON module which CarlitoxxPro states needs single
byte I2C reads to the EEPROM.

Pali Rohár reports that he also has a CarlitoxxPro-based V2801F module,
which reports a manufacturer of "OEM". This manufacturer can't be
matched as it appears in many different modules, so also match the part
number too.

Reported-by: Thomas Schreiber <tschreibe@gmail.com>
Reported-by: Pali Rohár <pali@kernel.org>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>