linux-stable.git/drivers/net/phy, branch v4.9.78

net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround

2018-01-02T19:35:13+00:00

[ Upstream commit c1a8d0a3accf64a014d605e6806ce05d1c17adf1 ]

Under some circumstances driver will perform PHY reset in
ksz9031_read_status() to fix autoneg failure case (idle error count =
0xFF). When this happens ksz9031 will not detect link status change any
more when connecting to Netgear 1G switch (link can be recovered sometimes by
restarting netdevice "ifconfig down up"). Reproduced with TI am572x board
equipped with ksz9031 PHY while connecting to Netgear 1G switch.

Fix the issue by reconfiguring autonegotiation after PHY reset in
ksz9031_read_status().

Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg")
Signed-off-by: Grygorii Strashko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: phy: at803x: Change error to EINVAL for invalid MAC

2017-12-25T13:23:43+00:00

[ Upstream commit fc7556877d1748ac00958822a0a3bba1d4bd9e0d ]

Change the return error code to EINVAL if the MAC
address is not valid in the set_wol function.

Signed-off-by: Dan Murphy 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

spi_ks8995: regs_size incorrect for some devices

2017-12-14T08:28:20+00:00

[ Upstream commit 239870f2a0ebf75cc8f6d987dc528c5243f93d69 ]

Signed-off-by: Maarten Blomme 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

spi_ks8995: fix "BUG: key accdaa28 not in .data!"

2017-12-14T08:28:20+00:00

[ Upstream commit 4342696df764ec65dcdfbd0c10d90ea52505f8ba ]

Signed-off-by: Maarten Blomme 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause

2017-12-09T21:01:54+00:00

[ Upstream commit cf626c3b252b2c9d131be0dd66096ec3bf729e54 ]

As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause"
this phy driver should not set these feature bits.

Signed-off-by: Sean Nyekjaer 
Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795")
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: phy: dp83867: Recover from "port mirroring" N/A MODE4

2017-11-08T09:08:35+00:00

[ Upstream commit ac6e058b75be71208e98a5808453aae9a17be480 ]

The DP83867 when not properly bootstrapped - especially with LED_0 pin -
can enter N/A MODE4 for "port mirroring" feature.

To provide normal operation of the PHY, one needs not only to explicitly
disable the port mirroring feature, but as well stop some IC internal
testing (which disables RGMII communication).

To do that the STRAP_STS1 (0x006E) register must be read and RESERVED bit
11 examined. When it is set, the another RESERVED bit (11) at PHYCR
(0x0010) register must be clear to disable testing mode and enable RGMII
communication.

Thorough explanation of the problem can be found at following e2e thread:
"DP83867IR: Problem with RESERVED bits in PHY Control Register (PHYCR) -
Linux driver"

https://e2e.ti.com/support/interface/ethernet/f/903/p/571313/2096954#2096954

Signed-off-by: Lukasz Majewski 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: phy: Fix mask value write on gmii2rgmii converter speed register

2017-10-12T09:51:21+00:00

[ Upstream commit f2654a4781318dc7ab8d6cde66f1fa39eab980a9 ]

To clear Speed Selection in MDIO control register(0x10),
ie, clear bits 6 and 13 to zero while keeping other bits same.
Before AND operation,The Mask value has to be perform with bitwise NOT
operation (ie, ~ operator)

This patch clears current speed selection before writing the
new speed settings to gmii2rgmii converter

Fixes: f411a6160bd4 ("net: phy: Add gmiitorgmii converter support")

Signed-off-by: Fahad Kunnathadi 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"

2017-09-20T06:19:55+00:00

[ Upstream commit ebc8254aeae34226d0bc8fda309fd9790d4dccfe ]

This reverts commit 7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy:
Correctly process PHY_HALTED in phy_stop_machine()") because it is
creating the possibility for a NULL pointer dereference.

David Daney provide the following call trace and diagram of events:

When ndo_stop() is called we call:

 phy_disconnect()
    +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL;
    +---> phy_stop_machine()
    |      +---> phy_state_machine()
    |              +----> queue_delayed_work(): Work queued.
    +--->phy_detach() implies: phydev->attached_dev = NULL;

Now at a later time the queued work does:

 phy_state_machine()
    +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL:

 CPU 12 Unable to handle kernel paging request at virtual address
0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c
Oops[#1]:
CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1
Workqueue: events_power_efficient phy_state_machine
task: 80000004021ed100 task.stack: 8000000409d70000
$ 0   : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004
$ 4   : 0000000000000000 0000000000000001 0000000000000004 0000000000000000
$ 8   : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000
$12   : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b
$16   : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800
$20   : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008
$24   : 0000000000000061 ffffffff808637b0
$28   : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c
Hi    : 000000000000002a
Lo    : 000000000000003f
epc   : ffffffff80de37ec netif_carrier_off+0xc/0x58
ra    : ffffffff80c7804c phy_state_machine+0x48c/0x4f8
Status: 14009ce3        KX SX UX KERNEL EXL IE
Cause : 00800008 (ExcCode 02)
BadVA : 0000000000000048
PrId  : 000d9501 (Cavium Octeon III)
Modules linked in:
Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000,
task=80000004021ed100, tls=0000000000000000)
Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00
        0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300
        80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001
        ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000
        8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000
        ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240
        0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00
        8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8
        8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08
        8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080
        ...
Call Trace:
[] netif_carrier_off+0xc/0x58
[] phy_state_machine+0x48c/0x4f8
[] process_one_work+0x158/0x368
[] worker_thread+0x150/0x4c0
[] kthread+0xc8/0xe0
[] ret_from_kernel_thread+0x14/0x1c

The original motivation for this change originated from Marc Gonzales
indicating that his network driver did not have its adjust_link callback
executing with phydev->link = 0 while he was expecting it.

PHYLIB has never made any such guarantees ever because phy_stop() merely just
tells the workqueue to move into PHY_HALTED state which will happen
asynchronously.

Reported-by: Geert Uytterhoeven 
Reported-by: David Daney 
Fixes: 7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()")
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: phy: Fix PHY unbind crash

2017-08-11T15:49:37+00:00

commit 7b9a88a390dacb37b051a7b09b9a08f546edf5eb upstream.

The PHY library does not deal very well with bind and unbind events. The first
thing we would see is that we were not properly canceling the PHY state machine
workqueue, so we would be crashing while dereferencing phydev->drv since there
is no driver attached anymore.

Suggested-by: Russell King 
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Cc: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

phy state machine: failsafe leave invalid RUNNING state

2017-08-11T15:49:35+00:00

[ Upstream commit 811a919135b980bac8009d042acdccf10dc1ef5e ]

While in RUNNING state, phy_state_machine() checks for link changes by
comparing phydev->link before and after calling phy_read_status().
This works as long as it is guaranteed that phydev->link is never
changed outside the phy_state_machine().

If in some setups this happens, it causes the state machine to miss
a link loss and remain RUNNING despite phydev->link being 0.

This has been observed running a dsa setup with a process continuously
polling the link states over ethtool each second (SNMPD RFC-1213
agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET
causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to
call phy_read_status() and with that modify the link status - and
with that bricking the phy state machine.

This patch adds a fail-safe check while in RUNNING, which causes to
move to CHANGELINK when the link is gone and we are still RUNNING.

Signed-off-by: Zefir Kurtisi 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman