linux-stable.git/drivers/net/phy, branch v3.18.48

broadcom: fix PHY_ID_BCM5481 entry in the id table

2015-12-14T17:19:26+00:00

[ Upstream commit 3c25a860d17b7378822f35d8c9141db9507e3beb ]

Commit fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0
with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting
the original). Fix that.

Fixes: fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
Signed-off-by: Aaro Koskinen 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: phy: fix phy link up when limiting speed via device tree

2015-07-05T14:13:00+00:00

[ Upstream commit eb686231fce3770299760f24fdcf5ad041f44153 ]

When limiting phy link speed using "max-speed" to 100mbps or less on a
giga bit phy, phy never completes auto negotiation and phy state
machine is held in PHY_AN. Fixing this issue by comparing the giga
bit advertise though phydev->supported doesn't have it but phy has
BMSR_ESTATEN set. So that auto negotiation is restarted as old and
new advertise are different and link comes up fine.

Signed-off-by: Mugunthan V N 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: dp83640: fix improper double spin locking.

2015-06-15T18:26:51+00:00

[ Upstream commit adbe088f6f8b0b7701fe07f51fe6f2bd602a6665 ]

A pair of nested spin locks was introduced in commit 63502b8d0
"dp83640: Fix receive timestamp race condition".

Unfortunately the 'flags' parameter was reused for the inner lock,
clobbering the originally saved IRQ state.  This patch fixes the issue
by changing the inner lock to plain spin_lock without irqsave.

Signed-off-by: Richard Cochran 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: dp83640: reinforce locking rules.

2015-06-15T18:26:51+00:00

[ Upstream commit a935865c828c8cd20501f618c69f659a5b6d6a5f ]

Callers of the ext_write function are supposed to hold a mutex that
protects the state of the dialed page, but one caller was missing the
lock from the very start, and over time the code has been changed
without following the rule.  This patch cleans up the call sites in
violation of the rule.

Signed-off-by: Richard Cochran 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: dp83640: fix broken calibration routine.

2015-06-15T18:26:51+00:00

[ Upstream commit 397a253af5031de4a4612210055935309af4472c ]

Currently, the calibration function that corrects the initial offsets
among multiple devices only works the first time.  If the function is
called more than once, the calibration fails and bogus offsets will be
programmed into the devices.

In a well hidden spot, the device documentation tells that trigger indexes
0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work.

This patch fixes the issue by using one of the special triggers during the
recalibration method.

Signed-off-by: Richard Cochran 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: phy: Allow EEE for all RGMII variants

2015-06-15T18:26:49+00:00

[ Upstream commit 7e14069651591c81046ffaec13c3dac8cb70f5fb ]

RGMII interfaces come in multiple flavors: RGMII with transmit or
receive internal delay, no delays at all, or delays in both direction.

This change extends the initial check for PHY_INTERFACE_MODE_RGMII to
cover all of these variants since EEE should be allowed for any of these
modes, since it is a property of the RGMII, hence Gigabit PHY capability
more than the RGMII electrical interface and its delays.

Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers")
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: phy: Fix verification of EEE support in phy_init_eee

2015-03-14T19:37:11+00:00

[ Upstream commit 54da5a8be3c1e924c35480eb44c6e9b275f6444e ]

phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex)
to find a valid entry in the settings array for the given speed
and duplex value. For full duplex 1000baseT, this will return
the first matching entry, which is the entry for 1000baseKX_Full.

If the phy eee does not support 1000baseKX_Full, this entry will not
match, causing phy_init_eee to fail for no good reason.

Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support")
Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array")
Cc: Giuseppe Cavallaro 
Signed-off-by: Guenter Roeck 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: ptp: fix time stamp matching logic for VLAN packets.

2014-11-12T20:06:17+00:00

Commit ae5c6c6d "ptp: Classify ptp over ip over vlan packets" changed the
code in two drivers that matches time stamps with PTP frames, with the goal
of allowing VLAN tagged PTP packets to receive hardware time stamps.

However, that commit failed to account for the VLAN header when parsing
IPv4 packets. This patch fixes those two drivers to correctly match VLAN
tagged IPv4/UDP PTP messages with their time stamps.

This patch should also be applied to v3.17.

Signed-off-by: Richard Cochran 
Signed-off-by: David S. Miller

net: phy: Correctly handle MII ioctl which changes autonegotiation.

2014-11-11T21:21:26+00:00

When advertised capabilities are changed with mii-tool, such as:
mii-tool -A 10baseT
the existing handler has two errors.

- An actual PHY register value is provided by mii-tool, and this
  must be mapped to internal state with mii_adv_to_ethtool_adv_t().
- The PHY state machine needs to be told that autonegotiation has
  again been performed.  If not, the MAC will not be notified of
  the new link speed and duplex, resulting in a possible config
  mismatch.

Signed-off-by: Brian Hill 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: Add SGMII Configuration for Marvell 88E1145 Initialization

2014-10-28T21:00:22+00:00

Marvell phy 88E1145 configuration & initialization was missing a case
for initializing SGMII mode. This patch adds that case.

Signed-off-by: Vince Bridgers 
Signed-off-by: David S. Miller