linux-stable.git/drivers/net/phy/phy_device.c, branch v6.8

Revert "Introduce PHY listing and link_topology tracking"

2024-01-05T00:05:47+00:00

This reverts commit 32bb4515e34469975abc936deb0a116c4a445817.
This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a.
This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1.
This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8.
This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf.
This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6.
This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b.
This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5.
This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113.
This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e.
This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a.
This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34.
This reverts commit 02018c544ef113e980a2349eba89003d6f399d22.

Looks like we need more time for reviews, and incremental
changes will be hard to make sense of. So revert.

Link: https://lore.kernel.org/all/ZZP6FV5sXEf+xd58@shell.armlinux.org.uk/
Signed-off-by: Jakub Kicinski

net: phy: add helpers to handle sfp phy connect/disconnect

2024-01-01T18:38:56+00:00

There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.

By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.

Signed-off-by: Maxime Chevallier 
Signed-off-by: David S. Miller

net: sfp: pass the phy_device when disconnecting an sfp module's PHY

2024-01-01T18:38:56+00:00

Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.

Signed-off-by: Maxime Chevallier 
Signed-off-by: David S. Miller

net: phy: Introduce ethernet link topology representation

2024-01-01T18:38:56+00:00

Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.

With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.

The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.

Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.

The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.

This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.

The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to.

Signed-off-by: Maxime Chevallier 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-12-21T21:17:23+00:00

Cross-merge networking fixes after downstream PR.

Adjacent changes:

drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
  23c93c3b6275 ("bnxt_en: do not map packet buffers twice")
  6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")

tools/testing/selftests/net/Makefile
  2258b666482d ("selftests: add vlan hw filter tests")
  a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit")

Signed-off-by: Paolo Abeni

net: phy: extend PHY package API to support multiple global address

2023-12-17T20:10:07+00:00

Current API for PHY package are limited to single address to configure
global settings for the PHY package.

It was found that some PHY package (for example the qca807x, a PHY
package that is shipped with a bundle of 5 PHY) requires multiple PHY
address to configure global settings. An example scenario is a PHY that
have a dedicated PHY for PSGMII/serdes calibrarion and have a specific
PHY in the package where the global PHY mode is set and affects every
other PHY in the package.

Change the API in the following way:
- Change phy_package_join() to take the base addr of the PHY package
  instead of the global PHY addr.
- Make __/phy_package_write/read() require an additional arg that
  select what global PHY address to use by passing the offset from the
  base addr passed on phy_package_join().

Each user of this API is updated to follow this new implementation
following a pattern where an enum is defined to declare the offset of the
addr.

We also drop the check if shared is defined as any user of the
phy_package_read/write is expected to use phy_package_join first. Misuse
of this will correctly trigger a kernel panic for NULL pointer
exception.

Signed-off-by: Christian Marangi 
Signed-off-by: David S. Miller

net: phy: skip LED triggers on PHYs on SFP modules

2023-12-16T01:53:42+00:00

Calling led_trigger_register() when attaching a PHY located on an SFP
module potentially (and practically) leads into a deadlock.
Fix this by not calling led_trigger_register() for PHYs localted on SFP
modules as such modules actually never got any LEDs.

======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4-next-20231208+ #0 Tainted: G           O
------------------------------------------------------
kworker/u8:2/43 is trying to acquire lock:
ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8

but task is already holding lock:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&sfp->sm_mutex){+.+.}-{3:3}:
       __mutex_lock+0x88/0x7a0
       mutex_lock_nested+0x20/0x28
       cleanup_module+0x2ae0/0x3120 [sfp]
       sfp_register_bus+0x5c/0x9c
       sfp_register_socket+0x48/0xd4
       cleanup_module+0x271c/0x3120 [sfp]
       platform_probe+0x64/0xb8
       really_probe+0x17c/0x3c0
       __driver_probe_device+0x78/0x164
       driver_probe_device+0x3c/0xd4
       __driver_attach+0xec/0x1f0
       bus_for_each_dev+0x60/0xa0
       driver_attach+0x20/0x28
       bus_add_driver+0x108/0x208
       driver_register+0x5c/0x118
       __platform_driver_register+0x24/0x2c
       init_module+0x28/0xa7c [sfp]
       do_one_initcall+0x70/0x2ec
       do_init_module+0x54/0x1e4
       load_module+0x1b78/0x1c8c
       __do_sys_init_module+0x1bc/0x2cc
       __arm64_sys_init_module+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #2 (rtnl_mutex){+.+.}-{3:3}:
       __mutex_lock+0x88/0x7a0
       mutex_lock_nested+0x20/0x28
       rtnl_lock+0x18/0x20
       set_device_name+0x30/0x130
       netdev_trig_activate+0x13c/0x1ac
       led_trigger_set+0x118/0x234
       led_trigger_write+0x104/0x17c
       sysfs_kf_bin_write+0x64/0x80
       kernfs_fop_write_iter+0x128/0x1b4
       vfs_write+0x178/0x2a4
       ksys_write+0x58/0xd4
       __arm64_sys_write+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #1 (&led_cdev->trigger_lock){++++}-{3:3}:
       down_write+0x4c/0x13c
       led_trigger_write+0xf8/0x17c
       sysfs_kf_bin_write+0x64/0x80
       kernfs_fop_write_iter+0x128/0x1b4
       vfs_write+0x178/0x2a4
       ksys_write+0x58/0xd4
       __arm64_sys_write+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #0 (triggers_list_lock){++++}-{3:3}:
       __lock_acquire+0x12a0/0x2014
       lock_acquire+0x100/0x2ac
       down_write+0x4c/0x13c
       led_trigger_register+0x4c/0x1a8
       phy_led_triggers_register+0x9c/0x214
       phy_attach_direct+0x154/0x36c
       phylink_attach_phy+0x30/0x60
       phylink_sfp_connect_phy+0x140/0x510
       sfp_add_phy+0x34/0x50
       init_module+0x15c/0xa7c [sfp]
       cleanup_module+0x1d94/0x3120 [sfp]
       cleanup_module+0x2bb4/0x3120 [sfp]
       process_one_work+0x1f8/0x4ec
       worker_thread+0x1e8/0x3d8
       kthread+0x104/0x110
       ret_from_fork+0x10/0x20

other info that might help us debug this:

Chain exists of:
  triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sfp->sm_mutex);
                               lock(rtnl_mutex);
                               lock(&sfp->sm_mutex);
  lock(triggers_list_lock);

 *** DEADLOCK ***

4 locks held by kworker/u8:2/43:
 #0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
 #1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
 #2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20
 #3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]

stack backtrace:
CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G           O       6.7.0-rc4-next-20231208+ #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: events_power_efficient cleanup_module [sfp]
Call trace:
 dump_backtrace+0xa8/0x10c
 show_stack+0x14/0x1c
 dump_stack_lvl+0x5c/0xa0
 dump_stack+0x14/0x1c
 print_circular_bug+0x328/0x430
 check_noncircular+0x124/0x134
 __lock_acquire+0x12a0/0x2014
 lock_acquire+0x100/0x2ac
 down_write+0x4c/0x13c
 led_trigger_register+0x4c/0x1a8
 phy_led_triggers_register+0x9c/0x214
 phy_attach_direct+0x154/0x36c
 phylink_attach_phy+0x30/0x60
 phylink_sfp_connect_phy+0x140/0x510
 sfp_add_phy+0x34/0x50
 init_module+0x15c/0xa7c [sfp]
 cleanup_module+0x1d94/0x3120 [sfp]
 cleanup_module+0x2bb4/0x3120 [sfp]
 process_one_work+0x1f8/0x4ec
 worker_thread+0x1e8/0x3d8
 kthread+0x104/0x110
 ret_from_fork+0x10/0x20

Signed-off-by: Daniel Golle 
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski

net: phy: mdio_device: Reset device only when necessary

2023-12-01T07:11:21+00:00

Currently the phy reset sequence is as shown below for a
devicetree described mdio phy on boot:

1. Assert the phy_device's reset as part of registering
2. Deassert the phy_device's reset as part of registering
3. Deassert the phy_device's reset as part of phy_probe
4. Deassert the phy_device's reset as part of phy_hw_init

The extra two deasserts include waiting the deassert delay afterwards,
which is adding unnecessary delay.

This applies to both possible types of resets (reset controller
reference and a reset gpio) that can be used.

Here's some snipped tracing output using the following command line
params "trace_event=gpio:* trace_options=stacktrace" illustrating
the reset handling and where its coming from:

    /* Assert */
       systemd-udevd-283     [002] .....     6.780434: gpio_value: 544 set 0
       systemd-udevd-283     [002] .....     6.783849: 
     => gpiod_set_raw_value_commit
     => gpiod_set_value_nocheck
     => gpiod_set_value_cansleep
     => mdio_device_reset
     => mdiobus_register_device
     => phy_device_register
     => fwnode_mdiobus_phy_device_register
     => fwnode_mdiobus_register_phy
     => __of_mdiobus_register
     => stmmac_mdio_register
     => stmmac_dvr_probe
     => stmmac_pltfr_probe
     => devm_stmmac_pltfr_probe
     => qcom_ethqos_probe
     => platform_probe

    /* Deassert */
       systemd-udevd-283     [002] .....     6.802480: gpio_value: 544 set 1
       systemd-udevd-283     [002] .....     6.805886: 
     => gpiod_set_raw_value_commit
     => gpiod_set_value_nocheck
     => gpiod_set_value_cansleep
     => mdio_device_reset
     => phy_device_register
     => fwnode_mdiobus_phy_device_register
     => fwnode_mdiobus_register_phy
     => __of_mdiobus_register
     => stmmac_mdio_register
     => stmmac_dvr_probe
     => stmmac_pltfr_probe
     => devm_stmmac_pltfr_probe
     => qcom_ethqos_probe
     => platform_probe

    /* Deassert */
       systemd-udevd-283     [002] .....     6.882601: gpio_value: 544 set 1
       systemd-udevd-283     [002] .....     6.886014: 
     => gpiod_set_raw_value_commit
     => gpiod_set_value_nocheck
     => gpiod_set_value_cansleep
     => mdio_device_reset
     => phy_probe
     => really_probe
     => __driver_probe_device
     => driver_probe_device
     => __device_attach_driver
     => bus_for_each_drv
     => __device_attach
     => device_initial_probe
     => bus_probe_device
     => device_add
     => phy_device_register
     => fwnode_mdiobus_phy_device_register
     => fwnode_mdiobus_register_phy
     => __of_mdiobus_register
     => stmmac_mdio_register
     => stmmac_dvr_probe
     => stmmac_pltfr_probe
     => devm_stmmac_pltfr_probe
     => qcom_ethqos_probe
     => platform_probe

    /* Deassert */
      NetworkManager-477     [000] .....     7.023144: gpio_value: 544 set 1
      NetworkManager-477     [000] .....     7.026596: 
     => gpiod_set_raw_value_commit
     => gpiod_set_value_nocheck
     => gpiod_set_value_cansleep
     => mdio_device_reset
     => phy_init_hw
     => phy_attach_direct
     => phylink_fwnode_phy_connect
     => __stmmac_open
     => stmmac_open

There's a lot of paths where the device is getting its reset
asserted and deasserted. Let's track the state and only actually
do the assert/deassert when it changes.

Reported-by: Sagar Cheluvegowda 
Signed-off-by: Andrew Halaney 
Reviewed-by: Andrew Lunn 
Link: https://lore.kernel.org/r/20231127-net-phy-reset-once-v2-1-448e8658779e@redhat.com
Signed-off-by: Jakub Kicinski

net: phy: add possible interfaces

2023-11-28T02:04:11+00:00

Add a possible_interfaces member to struct phy_device to indicate which
interfaces a clause 45 PHY may switch between depending on the media.
This must be populated by the PHY driver by the time the .config_init()
method completes according to the PHYs host-side configuration.

For example, the Marvell 88x3310 PHY can switch between 10GBASE-R,
5GBASE-R, 2500BASE-X, and SGMII on the host side depending on the media
side speed, so all these interface modes are set in the
possible_interfaces member.

This allows phylib users (such as phylink) to know in advance which
interface modes to expect, which allows them to appropriately restrict
the advertised link modes according to the capabilities of other parts
of the link.

Tested-by: Luo Jie 
Signed-off-by: Russell King (Oracle) 
Reviewed-by: Andrew Lunn 
Link: https://lore.kernel.org/r/E1r6VHk-00DDLN-I7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski

net: phy: correctly check soft_reset ret ONLY if defined for PHY

2023-11-24T01:17:45+00:00

Introduced by commit 6e2d85ec0559 ("net: phy: Stop with excessive soft
reset").

soft_reset call for phy_init_hw had multiple revision across the years
and the implementation goes back to 2014. Originally was a simple call
to write the generic PHY reset BIT, it was then moved to a dedicated
function. It was then added the option for PHY driver to define their
own special way to reset the PHY. Till this change, checking for ret was
correct as it was always filled by either the generic reset or the
custom implementation. This changed tho with commit 6e2d85ec0559 ("net:
phy: Stop with excessive soft reset"), as the generic reset call to PHY
was dropped but the ret check was never made entirely optional and
dependent whether soft_reset was defined for the PHY driver or not.

Luckly nothing was ever added before the soft_reset call so the ret
check (in the case where a PHY didn't had soft_reset defined) although
wrong, never caused problems as ret was init 0 at the start of
phy_init_hw.

To prevent any kind of problem and to make the function cleaner and more
robust, correctly move the ret check if the soft_reset section making it
optional and needed only with the function defined.

Signed-off-by: Christian Marangi 
Reviewed-by: Larysa Zaremba 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller