linux-stable.git/drivers/net/phy/phy_device.c, branch linux-6.13.y Linux kernel stable tree net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY 2025-04-20T08:17:33+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2025-04-07T09:40:42+00:00 54e5d00a8de6c13f6c01a94ed48025e882cd15f7 [ Upstream commit fc75ea20ffb452652f0d4033f38fe88d7cfdae35 ] DSA has 2 kinds of drivers: 1. Those who call dsa_switch_suspend() and dsa_switch_resume() from their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz 2. Those who don't: all others. The above methods should be optional. For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(), and dsa_switch_resume() calls dsa_user_resume() -> phylink_start(). These seem good candidates for setting mac_managed_pm = true because that is essentially its definition [1], but that does not seem to be the biggest problem for now, and is not what this change focuses on. Talking strictly about the 2nd category of DSA drivers here (which do not have MAC managed PM, meaning that for their attached PHYs, mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full), I have noticed that the following warning from mdio_bus_phy_resume() is triggered: WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && phydev->state != PHY_UP); because the PHY state machine is running. It's running as a result of a previous dsa_user_open() -> ... -> phylink_start() -> phy_start() having been initiated by the user. The previous mdio_bus_phy_suspend() was supposed to have called phy_stop_machine(), but it didn't. So this is why the PHY is in state PHY_NOLINK by the time mdio_bus_phy_resume() runs. mdio_bus_phy_suspend() did not call phy_stop_machine() because for phylink, the phydev->adjust_link function pointer is NULL. This seems a technicality introduced by commit fddd91016d16 ("phylib: fix PAL state machine restart on resume"). That commit was written before phylink existed, and was intended to avoid crashing with consumer drivers which don't use the PHY state machine - phylink always does, when using a PHY. But phylink itself has historically not been developed with suspend/resume in mind, and apparently not tested too much in that scenario, allowing this bug to exist unnoticed for so long. Plus, prior to the WARN_ON(), it would have likely been invisible. This issue is not in fact restricted to type 2 DSA drivers (according to the above ad-hoc classification), but can be extrapolated to any MAC driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where the issue was reported. Assuming mac_managed_pm is set correctly, a quick search indicates the following other drivers might be affected: $ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm drivers/net/ethernet/atheros/ag71xx.c drivers/net/ethernet/microchip/sparx5/sparx5_main.c drivers/net/ethernet/microchip/lan966x/lan966x_main.c drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/freescale/ucc_geth.c drivers/net/ethernet/freescale/enetc/enetc_pf_common.c drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c drivers/net/ethernet/marvell/mvneta.c drivers/net/ethernet/marvell/prestera/prestera_main.c drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/altera/altera_tse_main.c drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c drivers/net/ethernet/meta/fbnic/fbnic_phylink.c drivers/net/ethernet/tehuti/tn40_phy.c drivers/net/ethernet/mscc/ocelot_net.c Make the existing conditions dependent on the PHY device having a phydev->phy_link_change() implementation equal to the default phy_link_change() provided by phylib. Otherwise, we implicitly know that the phydev has the phylink-provided phylink_phy_change() callback, and when phylink is used, the PHY state machine always needs to be stopped/ started on the suspend/resume path. The code is structured as such that if phydev->phy_link_change() is absent, it is a matter of time until the kernel will crash - no need to further complicate the test. Thus, for the situation where the PM is not managed by the MAC, we will make the MDIO bus PM ops treat identically the phylink-controlled PHYs with the phylib-controlled PHYs where an adjust_link() callback is supplied. In both cases, the MDIO bus PM ops should stop and restart the PHY state machine. [1] https://lore.kernel.org/netdev/Z-1tiW9zjcoFkhwc@shell.armlinux.org.uk/ Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Reported-by: Wei Fang <wei.fang@nxp.com> Tested-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250407094042.2155633-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fc75ea20ffb452652f0d4033f38fe88d7cfdae35 ]

DSA has 2 kinds of drivers:

1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
   their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.

For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.

Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:

	WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
		phydev->state != PHY_UP);

because the PHY state machine is running.

It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.

The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.

mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.

This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:

$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c

Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.

Thus, for the situation where the PM is not managed by the MAC, we will
make the MDIO bus PM ops treat identically the phylink-controlled PHYs
with the phylib-controlled PHYs where an adjust_link() callback is
supplied. In both cases, the MDIO bus PM ops should stop and restart the
PHY state machine.

[1] https://lore.kernel.org/netdev/Z-1tiW9zjcoFkhwc@shell.armlinux.org.uk/

Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250407094042.2155633-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend() 2025-04-20T08:17:32+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2025-04-07T09:38:59+00:00 9fee8795576161852e18294edd2fe28d58deaa47 [ Upstream commit f40a673d6b4a128fe95dd9b8c3ed02da50a6a862 ] In an upcoming change, mdio_bus_phy_may_suspend() will need to distinguish a phylib-based PHY client from a phylink PHY client. For that, it will need to compare the phydev->phy_link_change() function pointer with the eponymous phy_link_change() provided by phylib. To avoid forward function declarations, the default PHY link state change method should be moved upwards. There is no functional change associated with this patch, it is only to reduce the noise from a real bug fix. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250407093900.2155112-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: fc75ea20ffb4 ("net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f40a673d6b4a128fe95dd9b8c3ed02da50a6a862 ]

In an upcoming change, mdio_bus_phy_may_suspend() will need to
distinguish a phylib-based PHY client from a phylink PHY client.
For that, it will need to compare the phydev->phy_link_change() function
pointer with the eponymous phy_link_change() provided by phylib.

To avoid forward function declarations, the default PHY link state
change method should be moved upwards. There is no functional change
associated with this patch, it is only to reduce the noise from a real
bug fix.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250407093900.2155112-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: fc75ea20ffb4 ("net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: ethtool: plumb PHY stats to PHY drivers 2025-03-13T12:07:57+00:00 Jakub Kicinski kuba@kernel.org 2025-01-10T06:05:12+00:00 824821651de4f25fe418d99ae0a09d5f7274d7ae [ Upstream commit b7a2c1fe6b55364e61b4b54b991eb43a47bb1104 ] Introduce support for standardized PHY statistics reporting in ethtool by extending the PHYLIB framework. Add the functions phy_ethtool_get_phy_stats() and phy_ethtool_get_link_ext_stats() to provide a consistent interface for retrieving PHY-level and link-specific statistics. These functions are used within the ethtool implementation to avoid direct access to the phy_device structure outside of the PHYLIB framework. A new structure, ethtool_phy_stats, is introduced to standardize PHY statistics such as packet counts, byte counts, and error counters. Drivers are updated to include callbacks for retrieving PHY and link-specific statistics, ensuring values are explicitly set only for supported fields, initialized with ETHTOOL_STAT_NOT_SET to avoid ambiguity. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 637399bf7e77 ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b7a2c1fe6b55364e61b4b54b991eb43a47bb1104 ]

Introduce support for standardized PHY statistics reporting in ethtool
by extending the PHYLIB framework. Add the functions
phy_ethtool_get_phy_stats() and phy_ethtool_get_link_ext_stats() to
provide a consistent interface for retrieving PHY-level and
link-specific statistics. These functions are used within the ethtool
implementation to avoid direct access to the phy_device structure
outside of the PHYLIB framework.

A new structure, ethtool_phy_stats, is introduced to standardize PHY
statistics such as packet counts, byte counts, and error counters.
Drivers are updated to include callbacks for retrieving PHY and
link-specific statistics, ensuring values are explicitly set only for
supported fields, initialized with ETHTOOL_STAT_NOT_SET to avoid
ambiguity.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 637399bf7e77 ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2024-11-19T12:56:02+00:00 Paolo Abeni pabeni@redhat.com 2024-11-19T12:27:50+00:00 dd7207838d38780b51e4690ee508ab2d5057e099 Merge in late fixes to prepare for the 6.13 net-next PR. Conflicts: include/linux/phy.h 41ffcd95015f net: phy: fix phylib's dual eee_enabled 721aa69e708b net: phy: convert eee_broken_modes to a linkmode bitmap https://lore.kernel.org/all/20241118135512.1039208b@canb.auug.org.au/ drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c 2160428bcb20 net: txgbe: fix null pointer to pcs 2160428bcb20 net: txgbe: remove GPIO interrupt controller Adjacent commits: include/linux/phy.h 41ffcd95015f net: phy: fix phylib's dual eee_enabled 516a5f11eb97 net: phy: respect cached advertising when re-enabling EEE Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Merge in late fixes to prepare for the 6.13 net-next PR.

Conflicts:

include/linux/phy.h
  41ffcd95015f net: phy: fix phylib's dual eee_enabled
  721aa69e708b net: phy: convert eee_broken_modes to a linkmode bitmap
https://lore.kernel.org/all/20241118135512.1039208b@canb.auug.org.au/

drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
  2160428bcb20 net: txgbe: fix null pointer to pcs
  2160428bcb20 net: txgbe: remove GPIO interrupt controller

Adjacent commits:

include/linux/phy.h
  41ffcd95015f net: phy: fix phylib's dual eee_enabled
  516a5f11eb97 net: phy: respect cached advertising when re-enabling EEE

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: phy: fix phylib's dual eee_enabled 2024-11-15T22:27:37+00:00 Russell King (Oracle) rmk+kernel@armlinux.org.uk 2024-11-14T10:33:27+00:00 41ffcd95015f18178ddc53fed919c2842d52fe38 phylib has two eee_enabled members. Some parts of the code are using phydev->eee_enabled, other parts are using phydev->eee_cfg.eee_enabled. This leads to incorrect behaviour as their state goes out of sync. ethtool --show-eee shows incorrect information, and --set-eee sometimes doesn't take effect. Fix this by only having one eee_enabled member - that in eee_cfg. Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/E1tBXAF-00341F-EQ@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
phylib has two eee_enabled members. Some parts of the code are using
phydev->eee_enabled, other parts are using phydev->eee_cfg.eee_enabled.
This leads to incorrect behaviour as their state goes out of sync.
ethtool --show-eee shows incorrect information, and --set-eee sometimes
doesn't take effect.

Fix this by only having one eee_enabled member - that in eee_cfg.

Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/E1tBXAF-00341F-EQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: remove genphy_config_eee_advert 2024-11-08T04:31:06+00:00 Heiner Kallweit hkallweit1@gmail.com 2024-11-06T20:25:12+00:00 db73835f54fc57bc267d43836905588f24ddac85 bcm_config_lre_aneg() doesn't use genphy_config_eee_advert() any longer. As this was the only user, we can remove genphy_config_eee_advert() now. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/37da7f3e-b883-4c07-9881-b8c0516822b7@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
bcm_config_lre_aneg() doesn't use genphy_config_eee_advert() any longer.
As this was the only user, we can remove genphy_config_eee_advert() now.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/37da7f3e-b883-4c07-9881-b8c0516822b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: support 'active-high' property for PHY LEDs 2024-10-15T09:24:21+00:00 Daniel Golle daniel@makrotopia.org 2024-10-10T12:54:19+00:00 a274465cc3bef2dfd9c9ea5100848dda0a8641e1 In addition to 'active-low' and 'inactive-high-impedance' also support 'active-high' property for PHY LED pin configuration. As only either 'active-high' or 'active-low' can be set at the same time, WARN and return an error in case both are set. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/91598487773d768f254d5faf06cf65b13e972f0e.1728558223.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
In addition to 'active-low' and 'inactive-high-impedance' also
support 'active-high' property for PHY LED pin configuration.
As only either 'active-high' or 'active-low' can be set at the
same time, WARN and return an error in case both are set.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/91598487773d768f254d5faf06cf65b13e972f0e.1728558223.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2024-10-10T20:13:33+00:00 Jakub Kicinski kuba@kernel.org 2024-10-03T17:05:55+00:00 9c0fc36ec493d20599cf088d21b6bddcdc184242 Cross-merge networking fixes after downstream PR (net-6.12-rc3). No conflicts and no adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Cross-merge networking fixes after downstream PR (net-6.12-rc3).

No conflicts and no adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: Validate PHY LED OPs presence before registering 2024-10-10T11:55:15+00:00 Christian Marangi ansuelsmth@gmail.com 2024-10-08T19:47:16+00:00 16aef66643a2f92275351caaaa4640bbaf84040c Validate PHY LED OPs presence before registering and parsing them. Defining LED nodes for a PHY driver that actually doesn't supports them is redundant and useless. It's also the case with Generic PHY driver used and a DT having LEDs node for the specific PHY. Skip it and report the error with debug print enabled. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241008194718.9682-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Validate PHY LED OPs presence before registering and parsing them.
Defining LED nodes for a PHY driver that actually doesn't supports them
is redundant and useless.

It's also the case with Generic PHY driver used and a DT having LEDs
node for the specific PHY.

Skip it and report the error with debug print enabled.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241008194718.9682-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: phy: Add support for PHY timing-role configuration via device tree 2024-10-08T08:50:15+00:00 Oleksij Rempel o.rempel@pengutronix.de 2024-10-04T09:01:00+00:00 20a4da20e0bd0297bf1ce083362e78b6702f991e Introduce support for configuring the master/slave role of PHYs based on the `timing-role` property in the device tree. While this functionality is necessary for Single Pair Ethernet (SPE) PHYs (1000/100/10Base-T1) where hardware strap pins may be unavailable or incorrectly set, it works for any PHY type. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Divya Koppera <divya.koppera@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Introduce support for configuring the master/slave role of PHYs based on
the `timing-role` property in the device tree. While this functionality
is necessary for Single Pair Ethernet (SPE) PHYs (1000/100/10Base-T1)
where hardware strap pins may be unavailable or incorrectly set, it
works for any PHY type.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>