linux-stable.git/drivers/net/phy/phy.c, branch linux-3.19.y

net: phy: Fix verification of EEE support in phy_init_eee

2015-03-18T13:10:49+00:00

[ Upstream commit 54da5a8be3c1e924c35480eb44c6e9b275f6444e ]

phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex)
to find a valid entry in the settings array for the given speed
and duplex value. For full duplex 1000baseT, this will return
the first matching entry, which is the entry for 1000baseKX_Full.

If the phy eee does not support 1000baseKX_Full, this entry will not
match, causing phy_init_eee to fail for no good reason.

Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support")
Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array")
Cc: Giuseppe Cavallaro 
Signed-off-by: Guenter Roeck 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: phy: Correctly handle MII ioctl which changes autonegotiation.

2014-11-11T21:21:26+00:00

When advertised capabilities are changed with mii-tool, such as:
mii-tool -A 10baseT
the existing handler has two errors.

- An actual PHY register value is provided by mii-tool, and this
  must be mapped to internal state with mii_adv_to_ethtool_adv_t().
- The PHY state machine needs to be told that autonegotiation has
  again been performed.  If not, the MAC will not be notified of
  the new link speed and duplex, resulting in a possible config
  mismatch.

Signed-off-by: Brian Hill 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-09-08T04:41:53+00:00

phy: fix EEE checks inside the phy_init_eee.

2014-08-27T23:29:39+00:00

According to the Std 802.3az if the EEE Adv (Reg 7.60), Link partner ability
(Reg 7.61) and EEE capability (Register 3.20) bits return 0 this  means no EEE
is supported. So this patch fixes the checks inside the phy_init_eee function.

Signed-off-by: Nandini Sharma 
Signed-off-by: Giuseppe Cavallaro 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: allow phy_init_eee() to work with internal PHYs

2014-08-23T18:39:09+00:00

Internal PHYs do not have any specific phy_interface_t defined because
they are within an Ethernet MAC or a larger IC, they will fail the early
check in phy_init_eee(). Allow these PHYs to proceed with EEE
initialization and report error/success by checking the standard C45
EEE-related registers.

Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: export phy_{read,write}_mmd_indirect

2014-08-23T18:39:09+00:00

Some PHY drivers might need to access Clause 45 registers in Clause 22
compatibility mode to e.g: properly advertise EEE support when disabled
by default.

Export these two helper functions: phy_read_mmd_indirect() and
phy_write_mmd_indirect() for drivers to use them.

Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: libphy: Add phy specific function to access mmd phy registers

2014-07-31T03:00:21+00:00

libphy was originally written assuming all phy devices support clause 45
access extensions to the mmd registers through the indirection registers
located within the first 16 phy registers. This assumption is not true
in all cases, and one specific example is the Micrel ksz9021 10/100/1000
Mbps phy. Using the stmmac driver, accessing the mmd registers to query
and configure energy efficient Ethernet (EEE) features yielded unexpected
behavior.

This patch adds mmd access functions to the phy driver that can be
overriden by the phy specific driver if the phy does not support this
mechanism or uses it's own non-standard access mechanism. By default,
the IEEE Compatible clause 45 access mechanism described in clause 22
is used. With this patch, EEE query/configure functions as expected
using the stmmac and the Micrel ksz9021 phy.

Signed-off-by: Vince Bridgers 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

phy: Expand phy speed/duplex settings array

2014-07-15T23:30:04+00:00

Expand the phy speed/duplex settings array to support more
than just baseT features. This change adds entries to support
the following additional speed/duplex/media types:
	SUPPORTED_10000baseKR_Full
	SUPPORTED_10000baseKX4_Full
	SUPPORTED_2500baseX_Full
	SUPPORTED_1000baseKX_Full

Additionally, it changes the 10GbE baseT entry from using the
hardcoded value 10000 to the SPEED_10000 define.

Signed-off-by: Tom Lendacky 
Signed-off-by: David S. Miller

net: phylib: add link_change_notify callback to phy device

2014-06-21T22:50:00+00:00

Add a notify callback to inform phy drivers when the core is about to
do its link adjustment. No change for drivers that do not implement
this callback.

Signed-off-by: Daniel Mack 
Signed-off-by: David S. Miller

net: phy: resume phydev when going to RESUMING

2014-05-16T19:17:58+00:00

With commit be9dad1f9f26604fb ("net: phy: suspend phydev when going
to HALTED"), an unused PHY device will be put in a low-power mode
using BMCR_PDOWN. Some Ethernet drivers might be calling phy_start()
and phy_stop() from ndo_open and ndo_close() respectively, while
calling phy_connect() and phy_disconnect() from probe and remove.
In such a case, the PHY will be powered down during the phy_stop()
call, but will fail to be powered up in phy_start().
This patch fixes this scenario.

Signed-off-by: Jiancheng Xue 
Signed-off-by: Zhangfei Gao 
Signed-off-by: David S. Miller