linux-stable.git/drivers/net/phy/mscc, branch linux-5.17.y

net: phy: mscc: Add MODULE_FIRMWARE macros

2022-03-17T16:06:09+00:00

The driver requires firmware so define MODULE_FIRMWARE so that modinfo
provides the details.

Fixes: fa164e40c53b ("net: phy: mscc: split the driver into separate files")
Signed-off-by: Juerg Haefliger 
Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com
Signed-off-by: Jakub Kicinski

net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEX

2021-12-14T12:28:24+00:00

Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP
ioctl to active device") the user could get bond active interface's
PHC index directly. But when there is a failover, the bond active
interface will change, thus the PHC index is also changed. This may
break the user's program if they did not update the PHC timely.

This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX.
When the user wants to get the bond active interface's PHC, they need to
add this flag and be aware the PHC index may be changed.

With the new flag. All flag checks in current drivers are removed. Only
the checking in net_hwtstamp_validate() is kept.

Suggested-by: Jakub Kicinski 
Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller

ethernet: constify references to netdev->dev_addr in drivers

2021-10-14T16:22:11+00:00

This big patch sprinkles const on local variables and
function arguments which may refer to netdev->dev_addr.

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Some of the changes here are not strictly required - const
is sometimes cast off but pointer is not used for writing.
It seems like it's still better to add the const in case
the code changes later or relevant -W flags get enabled
for the build.

No functional changes.

Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski

net: phy: mscc: make some arrays static const, makes object smaller

2021-08-02T16:15:07+00:00

Don't populate arrays on the stack but instead them static const.
Makes the object code smaller by 280 bytes.

Before:
   text    data     bss     dec     hex filename
  24142    4368     192   28702    701e ./drivers/net/phy/mscc/mscc_ptp.o

After:
   text    data     bss     dec     hex filename
  23830    4400     192   28422    6f06 ./drivers/net/phy/mscc/mscc_ptp.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King 
Link: https://lore.kernel.org/r/20210801070155.139057-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski

net: phy: mscc: fix macsec key length

2021-06-24T19:41:12+00:00

The key length used to store the macsec key was set to MACSEC_KEYID_LEN
(16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.

Fix this by using MACSEC_MAX_KEY_LEN instead (the max length accepted in
uAPI).

Fixes: 28c5107aa904 ("net: phy: mscc: macsec support")
Reported-by: Lior Nahmanson 
Signed-off-by: Antoine Tenart 
Signed-off-by: David S. Miller

net: phy: mscc: coma mode disabled for VSC8584

2021-03-19T19:17:30+00:00

This patch releases coma mode for VSC8584 as done for VSC8514 in
commit ca0d7fd0a58d ("net: phy: mscc: coma mode disabled for VSC8514")

Fixes: a5afc1678044a ("net: phy: mscc: add support for VSC8584 PHY.")
Signed-off-by: Bjarni Jonasson 
Signed-off-by: David S. Miller

net: phy: mscc: improved serdes calibration applied to VSC8584

2021-03-19T19:17:30+00:00

Introduced 'FOJI' serdes calibration in commit 85e97f0b984e
("net: phy: mscc: improved serdes calibration applied to VSC8514")
Now including the VSC8584 family.

Fixes: a5afc1678044a ("net: phy: mscc: add support for VSC8584 PHY.")
Signed-off-by: Bjarni Jonasson 
Signed-off-by: David S. Miller

net: phy: mscc: Applying LCPLL reset to VSC8584

2021-03-19T19:17:30+00:00

Introduced LCPLL reset in
commit d15e08d9fb82 ("net: phy: mscc: adding LCPLL reset to VSC8514").
Now applying this reset to the VSC8584 phy familiy.

Fixes: a5afc1678044a ("net: phy: mscc: add support for VSC8584 PHY.")
Signed-off-by: Bjarni Jonasson 
Signed-off-by: David S. Miller

net: phy: mscc: coma mode disabled for VSC8514

2021-02-16T22:06:19+00:00

The 'coma mode' (configurable through sw or hw) provides an
optional feature that may be used to control when the PHYs become active.
The typical usage is to synchronize the link-up time across
all PHY instances. This patch releases coma mode if not done by hardware,
otherwise the phys will not link-up.

Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.")
Signed-off-by: Steen Hegelund 
Signed-off-by: Bjarni Jonasson 
Signed-off-by: David S. Miller

net: phy: mscc: improved serdes calibration applied to VSC8514

2021-02-16T22:06:18+00:00

The current IB serdes calibration algorithm (performed by the onboard 8051)
has proven to be unstable for the VSC8514 QSGMII phy.
A new algorithm has been developed based on
'Frequency-offset Jittered-Injection' or 'FoJi' method which solves
all known issues.  This patch disables the 8051 algorithm and
replaces it with the new FoJi algorithm.
The calibration is now performed in a new file (mscc_serdes.c),
which can act as an placeholder for future serdes configurations.

Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.")
Signed-off-by: Steen Hegelund 
Signed-off-by: Bjarni Jonasson 
Tested-by: Vladimir Oltean 
Signed-off-by: David S. Miller