linux-stable.git/drivers/net/phy/mscc.c, branch linux-5.5.y

net: phy: mscc: fix firmware paths

2020-03-21T07:15:49+00:00

[ Upstream commit c87a9d6fc6d555e4981f2ded77d9a8cce950743e ]

The firmware paths for the VSC8584 PHYs not not contain the leading
'microchip/' directory, as used in linux-firmware, resulting in an
error when probing the driver. This patch fixes it.

Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY")
Signed-off-by: Antoine Tenart 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

mscc.c: fix semicolon.cocci warnings

2019-11-16T21:13:26+00:00

drivers/net/phy/mscc.c:1683:3-4: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 75a1ccfe6c72 ("mscc.c: Add support for additional VSC PHYs")
CC: Bryan Whitehead 
Signed-off-by: kbuild test robot 
Signed-off-by: David S. Miller

mscc.c: Add support for additional VSC PHYs

2019-11-13T20:34:38+00:00

Add support for the following VSC PHYs
	VSC8504, VSC8552, VSC8572
	VSC8562, VSC8564, VSC8575, VSC8582

Updates for v2:
	Checked for NULL on input to container_of
	Changed a large if else series to a switch statement.
	Added a WARN_ON to make sure lowest nibble of mask is 0

Signed-off-by: Bryan Whitehead 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: mscc: make arrays static, makes object smaller

2019-10-08T18:47:41+00:00

Don't populate const arrays on the stack but instead make them
static. Makes the object code smaller by 1058 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  29879	   6144	      0	  36023	   8cb7	drivers/net/phy/mscc.o

After:
   text	   data	    bss	    dec	    hex	filename
  28437	   6528	      0	  34965	   8895	drivers/net/phy/mscc.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King 
Signed-off-by: Jakub Kicinski

net: phy: remove calls to genphy_config_init

2019-08-17T19:34:50+00:00

Supported PHY features are either auto-detected or explicitly set.
In both cases calling genphy_config_init isn't needed. All that
genphy_config_init does is removing features that are set as
supported but can't be auto-detected. Basically it duplicates the
code in genphy_read_abilities. Therefore remove such calls from
all PHY drivers.

v2:
- remove call also from new adin PHY driver
v3:
- pass NULL as config_init function pointer for dp83848

Signed-off-by: Heiner Kallweit 
Signed-off-by: David S. Miller

net: phy: mscc: initialize stats array

2019-07-24T22:25:44+00:00

The memory allocated for the stats array may contain arbitrary data.

Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.")
Fixes: 00d70d8e0e78 ("net: phy: mscc: add support for VSC8574 PHY")
Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY")
Fixes: f76178dc5218 ("net: phy: mscc: add ethtool statistics counters")
Signed-off-by: Andreas Schwab 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: mscc: add support for VSC8514 PHY.

2019-04-23T17:47:58+00:00

The VSC8514 PHY is a 4-ports PHY that is 10/100/1000BASE-T, 100BASE-FX,
1000BASE-X, can communicate with the MAC via QSGMII.
The MAC interface protocol for each port within QSGMII can
be either 1000BASE-X or SGMII, if the QSGMII MAC that the VSC8514 is
connecting to supports this functionality.
VSC8514 also supports SGMII MAC-side autonegotiation on each individual
port, downshifting, can set the blinking pattern of each of its 4 LEDs,
SyncE, 1000BASE-T Ring Resiliency as well as HP Auto-MDIX detection.

This adds support for 10BASE-T, 100BASE-TX, and 1000BASE-T,
QSGMII link with the MAC, downshifting, HP Auto-MDIX detection
and blinking pattern for its 4 LEDs.

The GPIO register bank is a set of registers that are common to all PHYs
in the package. So any modification in any register of this bank affects
all PHYs of the package.

If the PHYs haven't been reset before booting the Linux kernel and were
configured to use interrupts for e.g. link status updates, it is
required to clear the interrupts mask register of all PHYs before being
able to use interrupts with any PHY. The first PHY of the package that
will be init will take care of clearing all PHYs interrupts mask
registers. Thus, we need to keep track of the init sequence in the
package, if it's already been done or if it's to be done.

Most of the init sequence of a PHY of the package is common to all PHYs
in the package, thus we use the SMI broadcast feature which enables us
to propagate a write in one register of one PHY to all PHYs in the same
package.

Signed-off-by: Kavya Sree Kotagiri 
Signed-off-by: Quentin Schulz 
Co-developed-by: Quentin Schulz 
Signed-off-by: David S. Miller

net: phy: switch drivers to use dynamic feature detection

2019-04-16T00:19:54+00:00

Recently genphy_read_abilities() has been added that dynamically detects
clause 22 PHY abilities. I *think* this detection should work with all
supported PHY's, at least for the ones with basic features sets, i.e.
PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
features explicitly and rely on phylib feature detection.

I don't have access to most of these PHY's, therefore I'd appreciate
regression testing.

v2:
- make the feature constant a comment so that readers know which
  features are supported by the respective PHY

Signed-off-by: Heiner Kallweit 
Tested-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: Convert some PHY and MDIO driver files to SPDX headers

2019-01-23T04:53:08+00:00

Where the license text and the MODULE_LICENSE() value agree, convert
to using an SPDX header, removing the license text.

Signed-off-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: mscc: Fix the VSC 8531/41 Chip Init sequence

2018-12-19T18:33:25+00:00

- Turn on Broadcast writes
- UNH 1.8.1 clear bias for UNH 1000BT distortion
- UNH 1.8.7 optimize pre-emphasis for 100BasTx UNH 100W fix
- Enable Token-ring during 'Coma Mode'

Signed-off-by: Raju Lakkaraju 
Signed-off-by: David S. Miller