linux-stable.git/drivers/net/phy/Makefile, branch v4.13.2

net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support

2017-06-07T01:14:13+00:00

Add phylib support for the Marvell Alaska X 10 Gigabit PHY (MV88X3310).
This phy is able to operate at 10G, 1G, 100M and 10M speeds, and only
supports Clause 45 accesses.

The PHY appears (based on the vendor IDs) to be two different vendors
IP, with each devad containing several instances.

This PHY driver has only been tested with the RJ45 copper port, fiber
port and a Marvell Armada 8040-based ethernet interface.

It should be noted that to use the full range of speeds, MAC drivers
need to also reconfigure the link mode as per phydev->interface, since
the PHY automatically changes its interface mode depending on the
negotiated speed.

Signed-off-by: Russell King 
Reviewed-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: add 802.3 clause 45 support to phylib

2017-06-07T01:14:13+00:00

Add generic helpers for 802.3 clause 45 PHYs for >= 10Gbps support.

Reviewed-by: Andrew Lunn 
Signed-off-by: Russell King 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: Add Cortina CS4340 driver

2017-05-30T16:42:27+00:00

Add basic support for Cortina PHY drivers. Support only CS4340 for now.
The phys are not compatible with IEEE 802.3 clause 22/45 registers.

Implement proper read_status support. The generic 10G phy driver causes
bus register access errors.

The driver should be described using the "ethernet-phy-id" device tree
compatible.

Signed-off-by: Bogdan Purcareata 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: Allow building mdio-boardinfo into the kernel

2017-03-29T17:32:32+00:00

mdio-boardinfo contains code that is helpful for platforms to register
specific MDIO bus devices independent of how CONFIG_MDIO_DEVICE or
CONFIG_PHYLIB will be selected (modular or built-in). In order to make
that possible, let's do the following:

- descend into drivers/net/phy/ unconditionally

- make mdiobus_setup_mdiodev_from_board_info() take a callback argument
  which allows us not to expose the internal MDIO board info list and
  mutex, yet maintain the logic within the same file

- relocate the code that creates a MDIO device into
  drivers/net/phy/mdio_bus.c

- build mdio-boardinfo.o into the kernel as soon as MDIO_DEVICE is
  defined (y or m)

Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Fixes: 648ea0134069 ("net: phy: Allow pre-declaration of MDIO devices")
Signed-off-by: Florian Fainelli 
Tested-by: Arnd Bergmann 
Signed-off-by: David S. Miller

net: phy: Allow splitting MDIO bus/device support from PHYs

2017-03-24T19:51:05+00:00

Introduce a new configuration symbol: MDIO_DEVICE which allows building
the MDIO devices and bus code, without pulling in the entire Ethernet
PHY library and devices code.

PHYLIB nows select MDIO_DEVICE and the relevant Makefile files are
updated to reflect that.

When MDIO_DEVICE (MDIO bus/device only) is selected, but not PHYLIB, we
have mdio-bus.ko as a loadable module, and it does not have a
module_exit() function because the safety of removing a bus class is
unclear.

When both MDIO_DEVICE and PHYLIB are enabled, we need to assemble
everything into a common loadable module: libphy.ko because of nasty
circular dependencies between phy.c, phy_device.c and mdio_bus.c which
are really tough to untangle.

Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: move phy MMD accessors to phy-core.c

2017-03-22T19:42:59+00:00

Move the phy_(read|write)__mmd() helpers out of line, they will become
our main MMD accessor functions, and so will be a little more complex.
This complexity doesn't belong in an inline function.  Also move the
_indirect variants as well to keep like functionality together.

Reviewed-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: Russell King 
Signed-off-by: David S. Miller

net: phy: Allow pre-declaration of MDIO devices

2017-02-07T15:51:46+00:00

Allow board support code to collect pre-declarations for MDIO devices by
registering them with mdiobus_register_board_info(). SPI and I2C buses
have a similar feature, we were missing this for MDIO devices, but this
is particularly useful for e.g: MDIO-connected switches which need to
provide their port layout (often board-specific) to a MDIO Ethernet
switch driver.

Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: Add Meson GXL Internal PHY driver

2016-11-09T17:50:55+00:00

Add driver for the Internal RMII PHY found in the Amlogic Meson GXL SoCs.

This PHY seems to only implement some standard registers and need some
workarounds to provide autoneg values from vendor registers.

Some magic values are currently used to configure the PHY, and this a
temporary setup until clarification about these registers names and
registers fields are provided by Amlogic.

Signed-off-by: Neil Armstrong 
Reviewed-by: Florian Fainelli 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: leds: add support for led triggers on phy link state change

2016-10-18T15:56:31+00:00

Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a
set of led triggers for each instantiated PHY device. There is one LED
trigger per link-speed, per-phy.
The triggers are registered during phy_attach and unregistered during
phy_detach.

This allows for a user to configure their system to allow a set of LEDs
not controlled by the phy to represent link state changes on the phy.
LEDS controlled by the phy are unaffected.

For example, we have a board where some of the leds in the
RJ45 socket are controlled by the phy, but others are not. Using the
triggers provided by this patch the leds not controlled by the phy can
be configured to show the current speed of the ethernet connection. The
leds controlled by the phy are unaffected.

Signed-off-by: Josh Cartwright 
Signed-off-by: Nathan Sullivan 
Signed-off-by: Zach Brown 
Signed-off-by: David S. Miller

net: phy: Sort Makefile and Kconfig

2016-08-20T00:11:50+00:00

Sort the files to reduce merge conflicts and to make it easier to find
drivers by name. Also separate the MDIO bus drivers from the PHY
drivers, again to help find what you need.

Signed-off-by: Andrew Lunn 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller