linux-stable.git/drivers/net/mdio, branch linux-6.14.y

net: mdio: mux-meson-gxl: set reversed bit when using internal phy

2025-05-09T07:55:59+00:00

[ Upstream commit b23285e93bef729e67519a5209d5b7fde3b4af50 ]

This bit is necessary to receive packets from the internal PHY.
Without this bit set, no activity occurs on the interface.

Normally u-boot sets this bit, but if u-boot is compiled without
net support, the interface will be up but without any activity.
If bit is set once, it will work until the IP is powered down or reset.

The vendor SDK sets this bit along with the PHY_ID bits.

Signed-off-by: Da Xue 
Fixes: 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support")
Link: https://patch.msgid.link/20250425192009.1439508-1-da@libre.computer
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-12-19T19:35:07+00:00

Cross-merge networking fixes after downstream PR (net-6.13-rc4).

No conflicts.

Adjacent changes:

drivers/net/ethernet/renesas/rswitch.h
  32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure")
  922b4b955a03 ("net: renesas: rswitch: rework ts tags management")

Signed-off-by: Jakub Kicinski

net: mdiobus: fix an OF node reference leak

2024-12-19T10:45:42+00:00

fwnode_find_mii_timestamper() calls of_parse_phandle_with_fixed_args()
but does not decrement the refcount of the obtained OF node. Add an
of_node_put() call before returning from the function.

This bug was detected by an experimental static analysis tool that I am
developing.

Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Joe Hattori 
Reviewed-by: Andrew Lunn 
Link: https://patch.msgid.link/20241218035106.1436405-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni

net: simplify resource acquisition + ioremap

2024-12-07T01:28:34+00:00

get resource + request_mem_region + ioremap can all be done by a single
function.

Replace them with devm_platform_get_and_ioremap_resource or\
devm_platform_ioremap_resource where res is not used.

Signed-off-by: Rosen Penev 
Reviewed-by: Vincent Mailhol  # sja1000_platform.c
Link: https://patch.msgid.link/20241203231337.182391-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski

net: mdio-ipq4019: add missing error check

2024-11-26T10:01:39+00:00

If an optional resource is found but fails to remap, return on failure.
Avoids any potential problems when using the iomapped resource as the
assumption is that it's available.

Fixes: 23a890d493e3 ("net: mdio: Add the reset function for IPQ MDIO driver")
Signed-off-by: Rosen Penev 
Reviewed-by: Andrew Lunn 
Link: https://patch.msgid.link/20241121193152.8966-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-10-21T07:14:18+00:00

Cross-merge networking fixes after downstream PR (net-6.12-rc4).

Conflicts:

107a034d5c1e ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c41c ("net/mlx5: Unregister notifier on eswitch init failure")

Signed-off-by: Paolo Abeni

net: phy: mdio-bcm-unimac: Add BCM6846 support

2024-10-16T01:23:53+00:00

Add Unimac mdio compatible string for the special BCM6846
variant.

This variant has a few extra registers compared to other
versions.

Suggested-by: Florian Fainelli 
Link: https://lore.kernel.org/linux-devicetree/b542b2e8-115c-4234-a464-e73aa6bece5c@broadcom.com/
Signed-off-by: Linus Walleij 
Link: https://patch.msgid.link/20241012-bcm6846-mdio-v1-2-c703ca83e962@linaro.org
Signed-off-by: Jakub Kicinski

net: mdio: Switch back to struct platform_driver::remove()

2024-10-04T23:39:57+00:00

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/net/mdio to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Andrew Lunn 
Link: https://patch.msgid.link/0b60d8bfc45a3de8193f953794dda241e11032a9.1727949050.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski

net: mdio: thunder: switch to scoped device_for_each_child_node()

2024-10-04T16:28:26+00:00

There has already been an issue with the handling of early exits from
device_for_each_child() in this driver, and it was solved with commit
b1de5c78ebe9 ("net: mdio: thunder: Add missing fwnode_handle_put()") by
adding a call to fwnode_handle_put() right after the loop.

That solution is valid indeed, but if a new error path with a 'return'
is added to the loop, this solution will fail. A more secure approach
is using the scoped variant of the macro, which automatically
decrements the refcount of the child node when it goes out of scope,
removing the need for explicit calls to fwnode_handle_put().

Signed-off-by: Javier Carrasco 
Link: https://patch.msgid.link/20240930-net-device_for_each_child_node_scoped-v2-1-35f09333c1d7@gmail.com
Signed-off-by: Jakub Kicinski

net: mdiobus: Debug print fwnode handle instead of raw pointer

2024-09-10T10:24:17+00:00

Was slightly misleading before, because printed is pointer to fwnode,
not to phy device, as placement in message suggested.  Include header
for dev_dbg() declaration while at it.

Output before:

    [  +0.001247] mdio_bus f802c000.ethernet-ffffffff: registered phy 2612f00a fwnode at address 3

Output after:

    [  +0.001229] mdio_bus f802c000.ethernet-ffffffff: registered phy fwnode /ahb/apb/ethernet@f802c000/ethernet-phy@3 at address 3

Reviewed-by: Florian Fainelli 
Reviewed-by: Andrew Lunn 
Signed-off-by: Alexander Dahl 
Link: https://patch.msgid.link/20240906062256.11289-1-ada@thorsis.com
Signed-off-by: Paolo Abeni