linux-stable.git/drivers/net/macvlan.c, branch linux-5.4.y

macvlan: Don't propagate promisc change to lower dev in passthru

2023-11-28T16:50:17+00:00

[ Upstream commit 7e1caeace0418381f36b3aa8403dfd82fc57fc53 ]

Macvlan device in passthru mode sets its lower device promiscuous mode
according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to
its own promiscuity setting. However, macvlan_change_rx_flags() function
doesn't check the mode before propagating such changes to the lower device
which can cause net_device->promiscuity counter overflow as illustrated by
reproduction example [0] and resulting dmesg log [1]. Fix the issue by
first verifying the mode in macvlan_change_rx_flags() function before
propagating promiscuous mode change to the lower device.

[0]:
ip link add macvlan1 link enp8s0f0 type macvlan mode passthru
ip link set macvlan1 promisc on
ip l set dev macvlan1 up
ip link set macvlan1 promisc off
ip l set dev macvlan1 down
ip l set dev macvlan1 up

[1]:
[ 5156.281724] macvlan1: entered promiscuous mode
[ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.287639] macvlan1: left promiscuous mode
[ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode
[ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.

Fixes: efdbd2b30caa ("macvlan: Propagate promiscuity setting to lower devices.")
Reviewed-by: Gal Pressman 
Signed-off-by: Vlad Buslov 
Reviewed-by: Jiri Pirko 
Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

macvlan: enforce a consistent minimal mtu

2022-11-25T16:42:21+00:00

commit b64085b00044bdf3cd1c9825e9ef5b2e0feae91a upstream.

macvlan should enforce a minimal mtu of 68, even at link creation.

This patch avoids the current behavior (which could lead to crashes
in ipv6 stack if the link is brought up)

$ ip link add macvlan1 link eno1 mtu 8 type macvlan  # This should fail !
$ ip link sh dev macvlan1
5: macvlan1@eno1:  mtu 8 qdisc noop
    state DOWN mode DEFAULT group default qlen 1000
    link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff
$ ip link set macvlan1 mtu 67
Error: mtu less than device minimum.
$ ip link set macvlan1 mtu 68
$ ip link set macvlan1 mtu 8
Error: mtu less than device minimum.

Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra")
Reported-by: syzbot 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: macvlan: Use built-in RCU list checking

2022-11-25T16:42:15+00:00

[ Upstream commit 5df1341ea822292275c56744aab9c536d75c33be ]

hlist_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to hlist_for_each_entry_rcu() to silence false
lockdep warning when CONFIG_PROVE_RCU_LIST is enabled.

Execute as follow:

 ip link add link eth0 type macvlan mode source macaddr add 

The rtnl_lock is held when macvlan_hash_lookup_source() or
macvlan_fill_info_macaddr() are called in the non-RCU read side section.
So, pass lockdep_rtnl_is_held() to silence false lockdep warning.

Fixes: 79cf79abce71 ("macvlan: add source mode")
Signed-off-by: Chuang Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: macvlan: fix memory leaks of macvlan_common_newlink

2022-11-25T16:42:07+00:00

[ Upstream commit 23569b5652ee8e8e55a12f7835f59af6f3cefc30 ]

kmemleak reports memory leaks in macvlan_common_newlink, as follows:

 ip link add link eth0 name .. type macvlan mode source macaddr add
 

kmemleak reports:

unreferenced object 0xffff8880109bb140 (size 64):
  comm "ip", pid 284, jiffies 4294986150 (age 430.108s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff  ..........Z.....
    80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b  ..............kk
  backtrace:
    [] kmem_cache_alloc_trace+0x1c7/0x300
    [] macvlan_hash_add_source+0x45/0xc0
    [] macvlan_changelink_sources+0xd7/0x170
    [] macvlan_common_newlink+0x38c/0x5a0
    [] macvlan_newlink+0xe/0x20
    [] __rtnl_newlink+0x7af/0xa50
    [] rtnl_newlink+0x48/0x70
    ...

In the scenario where the macvlan mode is configured as 'source',
macvlan_changelink_sources() will be execured to reconfigure list of
remote source mac addresses, at the same time, if register_netdevice()
return an error, the resource generated by macvlan_changelink_sources()
is not cleaned up.

Using this patch, in the case of an error, it will execute
macvlan_flush_sources() to ensure that the resource is cleaned up.

Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Chuang Wang 
Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

macvlan: validate setting of multiple remote source MAC addresses

2020-09-03T09:27:00+00:00

[ Upstream commit 8b61fba503904acae24aeb2bd5569b4d6544d48f ]

Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.

iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:

 # ip link add link eth0 name macvlan0 type macvlan mode source
 # ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
 RTNETLINK answers: Cannot assign requested address
 # ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
 # ip -d link show macvlan0
 5: macvlan0@eth0:  mtu 1500 ...
     link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
     macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...

With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.

Signed-off-by: Alvin Šipraga 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

macvlan: Skip loopback packets in RX handler

2020-06-22T07:31:09+00:00

[ Upstream commit 81f3dc9349ce0bf7b8447f147f45e70f0a5b36a6 ]

Ignore loopback-originatig packets soon enough and don't try to process L2
header where it doesn't exist. The very similar br_handle_frame() in bridge
code performs exactly the same check.

This is an example of such ICMPv6 packet:

skb len=96 headroom=40 headlen=96 tailroom=56
mac=(40,0) net=(40,40) trans=80
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0)
hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24
dev name=etha01.212 feat=0x0x0000000040005000
skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00
skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01
skb headroom: 00000020: 02 40 43 80 00 00 86 dd
skb linear:   00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00
skb linear:   00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00
skb linear:   00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d
skb linear:   00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c
skb linear:   00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81
skb linear:   00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00
skb tailroom: 00000000: ...
skb tailroom: 00000010: ...
skb tailroom: 00000020: ...
skb tailroom: 00000030: ...

Call Trace, how it happens exactly:
 ...
 macvlan_handle_frame+0x321/0x425 [macvlan]
 ? macvlan_forward_source+0x110/0x110 [macvlan]
 __netif_receive_skb_core+0x545/0xda0
 ? enqueue_task_fair+0xe5/0x8e0
 ? __netif_receive_skb_one_core+0x36/0x70
 __netif_receive_skb_one_core+0x36/0x70
 process_backlog+0x97/0x140
 net_rx_action+0x1eb/0x350
 ? __hrtimer_run_queues+0x136/0x2e0
 __do_softirq+0xe3/0x383
 do_softirq_own_stack+0x2a/0x40
 
 do_softirq.part.4+0x4e/0x50
 netif_rx_ni+0x60/0xd0
 dev_loopback_xmit+0x83/0xf0
 ip6_finish_output2+0x575/0x590 [ipv6]
 ? ip6_cork_release.isra.1+0x64/0x90 [ipv6]
 ? __ip6_make_skb+0x38d/0x680 [ipv6]
 ? ip6_output+0x6c/0x140 [ipv6]
 ip6_output+0x6c/0x140 [ipv6]
 ip6_send_skb+0x1e/0x60 [ipv6]
 rawv6_sendmsg+0xc4b/0xe10 [ipv6]
 ? proc_put_long+0xd0/0xd0
 ? rw_copy_check_uvector+0x4e/0x110
 ? sock_sendmsg+0x36/0x40
 sock_sendmsg+0x36/0x40
 ___sys_sendmsg+0x2b6/0x2d0
 ? proc_dointvec+0x23/0x30
 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6]
 ? dev_forward_change+0x130/0x130 [ipv6]
 ? _raw_spin_unlock+0x12/0x30
 ? proc_sys_call_handler.isra.14+0x9f/0x110
 ? __call_rcu+0x213/0x510
 ? get_max_files+0x10/0x10
 ? trace_hardirqs_on+0x2c/0xe0
 ? __sys_sendmsg+0x63/0xa0
 __sys_sendmsg+0x63/0xa0
 do_syscall_64+0x6c/0x1e0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Alexander Sverdlin 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

macvlan: fix null dereference in macvlan_device_event()

2020-04-29T14:33:07+00:00

[ Upstream commit 4dee15b4fd0d61ec6bbd179238191e959d34cf7a ]

In the macvlan_device_event(), the list_first_entry_or_null() is used.
This function could return null pointer if there is no node.
But, the macvlan module doesn't check the null pointer.
So, null-ptr-deref would occur.

      bond0
        |
   +----+-----+
   |          |
macvlan0   macvlan1
   |          |
 dummy0     dummy1

The problem scenario.
If dummy1 is removed,
1. ->dellink() of dummy1 is called.
2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module.
3. ->dellink() of macvlan1 is called.
4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module.
5. __bond_release_one() is called and it internally calls
   dev_set_mac_address().
6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1,
   which is macvlan_set_mac_address().
7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1.
8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module.
9. In the macvlan_device_event(), it calls list_first_entry_or_null().
At this point, dummy1 and macvlan1 were removed.
So, list_first_entry_or_null() will return NULL.

Test commands:
    ip netns add nst
    ip netns exec nst ip link add bond0 type bond
    for i in {0..10}
    do
        ip netns exec nst ip link add dummy$i type dummy
	ip netns exec nst ip link add macvlan$i link dummy$i \
		type macvlan mode passthru
	ip netns exec nst ip link set macvlan$i master bond0
    done
    ip netns del nst

Splat looks like:
[   40.585687][  T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI
[   40.587249][  T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[   40.588342][  T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532
[   40.589299][  T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   40.590469][  T146] Workqueue: netns cleanup_net
[   40.591045][  T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan]
[   40.591905][  T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2
[   40.594126][  T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246
[   40.594783][  T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   40.595653][  T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360
[   40.596495][  T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421
[   40.597377][  T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008
[   40.598186][  T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a
[   40.599012][  T146] FS:  0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000
[   40.600004][  T146] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   40.600665][  T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0
[   40.601485][  T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   40.602461][  T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   40.603443][  T146] Call Trace:
[   40.603871][  T146]  ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables]
[   40.604587][  T146]  ? macvlan_uninit+0x100/0x100 [macvlan]
[   40.605212][  T146]  ? __module_text_address+0x13/0x140
[   40.605842][  T146]  notifier_call_chain+0x90/0x160
[   40.606477][  T146]  dev_set_mac_address+0x28e/0x3f0
[   40.607117][  T146]  ? netdev_notify_peers+0xc0/0xc0
[   40.607762][  T146]  ? __module_text_address+0x13/0x140
[   40.608440][  T146]  ? notifier_call_chain+0x90/0x160
[   40.609097][  T146]  ? dev_set_mac_address+0x1f0/0x3f0
[   40.609758][  T146]  dev_set_mac_address+0x1f0/0x3f0
[   40.610402][  T146]  ? __local_bh_enable_ip+0xe9/0x1b0
[   40.611071][  T146]  ? bond_hw_addr_flush+0x77/0x100 [bonding]
[   40.611823][  T146]  ? netdev_notify_peers+0xc0/0xc0
[   40.612461][  T146]  ? bond_hw_addr_flush+0x77/0x100 [bonding]
[   40.613213][  T146]  ? bond_hw_addr_flush+0x77/0x100 [bonding]
[   40.613963][  T146]  ? __local_bh_enable_ip+0xe9/0x1b0
[   40.614631][  T146]  ? bond_time_in_interval.isra.31+0x90/0x90 [bonding]
[   40.615484][  T146]  ? __bond_release_one+0x9f0/0x12c0 [bonding]
[   40.616230][  T146]  __bond_release_one+0x9f0/0x12c0 [bonding]
[   40.616949][  T146]  ? bond_enslave+0x47c0/0x47c0 [bonding]
[   40.617642][  T146]  ? lock_downgrade+0x730/0x730
[   40.618218][  T146]  ? check_flags.part.42+0x450/0x450
[   40.618850][  T146]  ? __mutex_unlock_slowpath+0xd0/0x670
[   40.619519][  T146]  ? trace_hardirqs_on+0x30/0x180
[   40.620117][  T146]  ? wait_for_completion+0x250/0x250
[   40.620754][  T146]  bond_netdev_event+0x822/0x970 [bonding]
[   40.621460][  T146]  ? __module_text_address+0x13/0x140
[   40.622097][  T146]  notifier_call_chain+0x90/0x160
[   40.622806][  T146]  rollback_registered_many+0x660/0xcf0
[   40.623522][  T146]  ? netif_set_real_num_tx_queues+0x780/0x780
[   40.624290][  T146]  ? notifier_call_chain+0x90/0x160
[   40.624957][  T146]  ? netdev_upper_dev_unlink+0x114/0x180
[   40.625686][  T146]  ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30
[   40.626421][  T146]  ? mutex_is_locked+0x13/0x50
[   40.627016][  T146]  ? unregister_netdevice_queue+0xf2/0x240
[   40.627663][  T146]  unregister_netdevice_many.part.134+0x13/0x1b0
[   40.628362][  T146]  default_device_exit_batch+0x2d9/0x390
[   40.628987][  T146]  ? unregister_netdevice_many+0x40/0x40
[   40.629615][  T146]  ? dev_change_net_namespace+0xcb0/0xcb0
[   40.630279][  T146]  ? prepare_to_wait_exclusive+0x2e0/0x2e0
[   40.630943][  T146]  ? ops_exit_list.isra.9+0x97/0x140
[   40.631554][  T146]  cleanup_net+0x441/0x890
[ ... ]

Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode")
Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com
Signed-off-by: Taehee Yoo 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

macvlan: add cond_resched() during multicast processing

2020-03-18T06:17:39+00:00

[ Upstream commit ce9a4186f9ac475c415ffd20348176a4ea366670 ]

The Rx bound multicast packets are deferred to a workqueue and
macvlan can also suffer from the same attack that was discovered
by Syzbot for IPvlan. This solution is not as effective as in
IPvlan. IPvlan defers all (Tx and Rx) multicast packet processing
to a workqueue while macvlan does this way only for the Rx. This
fix should address the Rx codition to certain extent.

Tx is still suseptible. Tx multicast processing happens when
.ndo_start_xmit is called, hence we cannot add cond_resched().
However, it's not that severe since the user which is generating
 / flooding will be affected the most.

Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue")
Signed-off-by: Mahesh Bandewar 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

macvlan: use skb_reset_mac_header() in macvlan_queue_xmit()

2020-01-23T07:22:49+00:00

[ Upstream commit 1712b2fff8c682d145c7889d2290696647d82dab ]

I missed the fact that macvlan_broadcast() can be used both
in RX and TX.

skb_eth_hdr() makes only sense in TX paths, so we can not
use it blindly in macvlan_broadcast()

Fixes: 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()")
Signed-off-by: Eric Dumazet 
Reported-by: Jurgen Van Ham 
Tested-by: Matteo Croce 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

macvlan: do not assume mac_header is set in macvlan_broadcast()

2020-01-12T11:21:46+00:00

[ Upstream commit 96cc4b69581db68efc9749ef32e9cf8e0160c509 ]

Use of eth_hdr() in tx path is error prone.

Many drivers call skb_reset_mac_header() before using it,
but others do not.

Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
attempted to fix this generically, but commit d346a3fae3ff
("packet: introduce PACKET_QDISC_BYPASS socket option") brought
back the macvlan bug.

Lets add a new helper, so that tx paths no longer have
to call skb_reset_mac_header() only to get a pointer
to skb->data.

Hopefully we will be able to revert 6d1ccff62780
("net: reset mac header in dev_start_xmit()") and save few cycles
in transmit fast path.

BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline]
BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579

CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:639
 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145
 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
 mc_hash drivers/net/macvlan.c:251 [inline]
 macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline]
 macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559
 __netdev_start_xmit include/linux/netdevice.h:4447 [inline]
 netdev_start_xmit include/linux/netdevice.h:4461 [inline]
 dev_direct_xmit+0x419/0x630 net/core/dev.c:4079
 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240
 packet_snd net/packet/af_packet.c:2966 [inline]
 packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:659
 __sys_sendto+0x262/0x380 net/socket.c:1985
 __do_sys_sendto net/socket.c:1997 [inline]
 __se_sys_sendto net/socket.c:1993 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x442639
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639
RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000

Allocated by task 9389:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc mm/kasan/common.c:513 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
 __do_kmalloc mm/slab.c:3656 [inline]
 __kmalloc+0x163/0x770 mm/slab.c:3665
 kmalloc include/linux/slab.h:561 [inline]
 tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252
 tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
 tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
 security_inode_getattr+0xf2/0x150 security/security.c:1222
 vfs_getattr+0x25/0x70 fs/stat.c:115
 vfs_statx_fd+0x71/0xc0 fs/stat.c:145
 vfs_fstat include/linux/fs.h:3265 [inline]
 __do_sys_newfstat+0x9b/0x120 fs/stat.c:378
 __se_sys_newfstat fs/stat.c:375 [inline]
 __x64_sys_newfstat+0x54/0x80 fs/stat.c:375
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9389:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:335 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x10a/0x2c0 mm/slab.c:3757
 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289
 tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
 tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
 security_inode_getattr+0xf2/0x150 security/security.c:1222
 vfs_getattr+0x25/0x70 fs/stat.c:115
 vfs_statx_fd+0x71/0xc0 fs/stat.c:145
 vfs_fstat include/linux/fs.h:3265 [inline]
 __do_sys_newfstat+0x9b/0x120 fs/stat.c:378
 __se_sys_newfstat fs/stat.c:375 [inline]
 __x64_sys_newfstat+0x54/0x80 fs/stat.c:375
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a4932000
 which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1025 bytes inside of
 4096-byte region [ffff8880a4932000, ffff8880a4933000)
The buggy address belongs to the page:
page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0
raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000
raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: b863ceb7ddce ("[NET]: Add macvlan driver")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman