linux-stable.git/drivers/net/gianfar_ethtool.c, branch linux-3.1.y

gianfar: Fix overflow check and return value for gfar_get_cls_all()

2011-09-20T19:40:12+00:00

This function may currently fill one entry beyond the end of the
array it is given.  It also doesn't return an error code in case
it does detect overflow.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

gianfar: reduce stack usage in gianfar_ethtool.c

2011-08-14T01:00:33+00:00

  drivers/net/gianfar_ethtool.c:765: warning: the frame size of 2048 bytes is larger than 1024 bytes

Signed-off-by: Wang Shaoyan 
Reviewed-and-tested-by: Sebastian Pöhn 
Signed-off-by: David S. Miller

gianfar: do vlan cleanup

2011-07-21T20:47:55+00:00

- unify vlan and nonvlan rx path
- kill priv->vlgrp and gfar_vlan_rx_register
- allow to turn on/off rx/tx vlan accel via ethtool

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

gianfar v2: code cleanups

2011-07-07T11:30:29+00:00

This patch:
# improves readability of some gianfar nfc code

Signed-off-by: Sebastian Poehn 
Signed-off-by: David S. Miller

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

2011-06-21T05:29:08+00:00

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
	drivers/net/wireless/rtlwifi/pci.c
	net/netfilter/ipvs/ip_vs_core.c

gianfar v5: implement nfc

2011-06-20T20:57:59+00:00

This patch adds all missing functionalities for nfc except GRXFH. There is so much code because hardware has not a TCAM.
Further hardware rule space is very limited. So I had to extensively use
optimization features. Both reasons lead to the necessity to hold all
online flows in a linked-list.

Change-log:
# Some suggestions by Joe Perches applied (thanks!)
# Shorted some logs
# Use memcmp() for comparing

Signed-off-by: Sebastian Poehn 
Signed-off-by: David S. Miller

gianfar: Use pr_, netdev_ and netif_

2011-06-17T03:35:30+00:00

Use the current logging styles.

Add #define DEBUG to get same output for _dbg messages.
Convert a few bare printks to pr_err.

Fix a likely copy/paste defect where a test was done with RX values:
        if (num_rx_qs > MAX_RX_QS) {
but TX limits were emitted:
        printk(KERN_ERR "num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",
                              num_tx_qs, MAX_TX_QS);

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

gianfar:localized filer table

2011-06-09T07:12:57+00:00

Each eTSEC device should own localized filer table.

Signed-off-by: Jiajun Wu 
Signed-off-by: David S. Miller

net: gianfar: convert to hw_features

2011-04-15T22:50:41+00:00

Note: I bet that gfar_set_features() don't really need a full reset.

Signed-off-by: Michał Mirosław 
Signed-off-by: David S. Miller

gianfar: Clean up implementation of RX network flow classification

2011-04-11T20:28:43+00:00

This code was cribbed from niu, so gfar_set_hash_opts() begins by
converting the ethtool flow class code into a class code for Sun
Neptune hardware, then does the same thing again for the hardware it's
really dealing with.  It may also return -1 (-EPERM) for some
unhandled ethtool flow class codes.

Remove the useless code and definitions, and fix the error code.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller