linux-stable.git/drivers/net/ethernet, branch v3.2.91

net: tc35815: move free after the dereference

2017-07-18T17:38:44+00:00

commit 11faa7b0359aaf7efd406b7a6a077fda2b037d8e upstream.

We dereference "skb" to get "skb->len" so we should probably do that
step before freeing the skb.

Fixes: eea221ce4880 ("tc35815 driver update (take 2)")
Signed-off-by: Dan Carpenter 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: sky2: Fix shutdown crash

2017-03-16T02:18:54+00:00

[ Upstream commit 06ba3b2133dc203e1e9bc36cee7f0839b79a9e8b ]

The sky2 frequently crashes during machine shutdown with:

sky2_get_stats+0x60/0x3d8 [sky2]
dev_get_stats+0x68/0xd8
rtnl_fill_stats+0x54/0x140
rtnl_fill_ifinfo+0x46c/0xc68
rtmsg_ifinfo_build_skb+0x7c/0xf0
rtmsg_ifinfo.part.22+0x3c/0x70
rtmsg_ifinfo+0x50/0x5c
netdev_state_change+0x4c/0x58
linkwatch_do_dev+0x50/0x88
__linkwatch_run_queue+0x104/0x1a4
linkwatch_event+0x30/0x3c
process_one_work+0x140/0x3e0
worker_thread+0x60/0x44c
kthread+0xdc/0xf0
ret_from_fork+0x10/0x50

This is caused by the sky2 being called after it has been shutdown.
A previous thread about this can be found here:

https://lkml.org/lkml/2016/4/12/410

An alternative fix is to assure that IFF_UP gets cleared by
calling dev_close() during shutdown. This is similar to what the
bnx2/tg3/xgene and maybe others are doing to assure that the driver
isn't being called following _shutdown().

Signed-off-by: Jeremy Linton 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: xilinx_emaclite: fix receive buffer overflow

2017-03-16T02:18:50+00:00

commit cd224553641848dd17800fe559e4ff5d208553e8 upstream.

xilinx_emaclite looks at the received data to try to determine the
Ethernet packet length but does not properly clamp it if
proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer
overflow and a panic via skb_panic() as the length exceeds the allocated
skb size.

Fix those cases.

Also add an additional unconditional check with WARN_ON() at the end.

Signed-off-by: Anssi Hannula 
Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net/mlx4_core: Fix racy CQ (Completion Queue) free

2017-03-16T02:18:44+00:00

commit 291c566a28910614ce42d0ffe82196eddd6346f4 upstream.

In function mlx4_cq_completion() and mlx4_cq_event(), the
radix_tree_lookup requires a rcu_read_lock.
This is mandatory: if another core frees the CQ, it could
run the radix_tree_node_rcu_free() call_rcu() callback while
its being used by the radix tree lookup function.

Additionally, in function mlx4_cq_event(), since we are adding
the rcu lock around the radix-tree lookup, we no longer need to take
the spinlock. Also, the synchronize_irq() call for the async event
eliminates the need for incrementing the cq reference count in
mlx4_cq_event().

Other changes:
1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock:
   we no longer take this spinlock in the interrupt context.
   The spinlock here, therefore, simply protects against different
   threads simultaneously invoking mlx4_cq_free() for different cq's.

2. In function mlx4_cq_free(), we move the radix tree delete to before
   the synchronize_irq() calls. This guarantees that we will not
   access this cq during any subsequent interrupts, and therefore can
   safely free the CQ after the synchronize_irq calls. The rcu_read_lock
   in the interrupt handlers only needs to protect against corrupting the
   radix tree; the interrupt handlers may access the cq outside the
   rcu_read_lock due to the synchronize_irq calls which protect against
   premature freeing of the cq.

3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg.

4. We leave the cq reference count mechanism in place, because it is
   still needed for the cq completion tasklet mechanism.

Fixes: 6d90aa5cf17b ("net/mlx4_core: Make sure there are no pending async events when freeing CQ")
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Matan Barak 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

net/mlx4: Remove BUG_ON from ICM allocation routine

2017-03-16T02:18:34+00:00

commit c1d5f8ff80ea84768f5fae1ca9d1abfbb5e6bbaa upstream.

This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent()
by checking DMA address alignment in advance and performing proper
folding in case of error.

Fixes: 5b0bf5e25efe ("mlx4_core: Support ICM tables in coherent memory")
Reported-by: Ozgur Karatas 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net/mlx4_en: Fix bad WQE issue

2017-03-16T02:18:33+00:00

commit 6496bbf0ec481966ef9ffe5b6660d8d1b55c60cc upstream.

Single send WQE in RX buffer should be stamped with software
ownership in order to prevent the flow of QP in error in FW
once UPDATE_QP is called.

Fixes: 9f519f68cfff ('mlx4_en: Not using Shared Receive Queues')
Signed-off-by: Eugenia Emantayev 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: korina: Fix NAPI versus resources freeing

2017-03-16T02:18:33+00:00

commit e6afb1ad88feddf2347ea779cfaf4d03d3cd40b6 upstream.

Commit beb0babfb77e ("korina: disable napi on close and restart")
introduced calls to napi_disable() that were missing before,
unfortunately this leaves a small window during which NAPI has a chance
to run, yet we just freed resources since korina_free_ring() has been
called:

Fix this by disabling NAPI first then freeing resource, and make sure
that we also cancel the restart task before doing the resource freeing.

Fixes: beb0babfb77e ("korina: disable napi on close and restart")
Reported-by: Alexandros C. Couloumbis 
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: ep93xx_eth: Do not crash unloading module

2017-02-23T03:51:02+00:00

commit c823abac17926767fb50175e098f087a6ac684c3 upstream.

When we unload the ep93xx_eth, whether we have opened the network
interface or not, we will either hit a kernel paging request error, or a
simple NULL pointer de-reference because:

- if ep93xx_open has been called, we have created a valid DMA mapping
  for ep->descs, when we call ep93xx_stop, we also call
  ep93xx_free_buffers, ep->descs now has a stale value

- if ep93xx_open has not been called, we have a NULL pointer for
  ep->descs, so performing any operation against that address just won't
  work

Fix this by adding a NULL pointer check for ep->descs which means that
ep93xx_free_buffers() was able to successfully tear down the descriptors
and free the DMA cookie as well.

Fixes: 1d22e05df818 ("[PATCH] Cirrus Logic ep93xx ethernet driver")
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net/mlx4_en: Process all completions in RX rings after port goes up

2017-02-23T03:50:57+00:00

commit 8d59de8f7bb3db296331c665779c653b0c8d13ba upstream.

Currently there is a race between incoming traffic and
initialization flow. HW is able to receive the packets
after INIT_PORT is done and unicast steering is configured.
Before we set priv->port_up NAPI is not scheduled and
receive queues become full. Therefore we never get
new interrupts about the completions.
This issue could happen if running heavy traffic during
bringing port up.
The resolution is to schedule NAPI once port_up is set.
If receive queues were full this will process all cqes
and release them.

Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Erez Shitrit 
Signed-off-by: Eugenia Emantayev 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: mlx4_en_priv::rx_cq is an array of structs not pointers]
Signed-off-by: Ben Hutchings

net/mlx4_core: Fix deadlock when switching between polling and event fw commands

2017-02-23T03:50:50+00:00

commit a7e1f04905e5b2b90251974dddde781301b6be37 upstream.

When switching from polling-based fw commands to event-based fw
commands, there is a race condition which could cause a fw command
in another task to hang: that task will keep waiting for the polling
sempahore, but may never be able to acquire it. This is due to
mlx4_cmd_use_events, which "down"s the sempahore back to 0.

During driver initialization, this is not a problem, since no other
tasks which invoke FW commands are active.

However, there is a problem if the driver switches to polling mode
and then back to event mode during normal operation.

The "test_interrupts" feature does exactly that.
Running "ethtool -t  offline" causes the PF driver to
temporarily switch to polling mode, and then back to event mode.
(Note that for VF drivers, such switching is not performed).

Fix this by adding a read-write semaphore for protection when
switching between modes.

Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Matan Barak 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings