linux-stable.git/drivers/net/ethernet, branch linux-6.8.y Linux kernel stable tree net: txgbe: fix GPIO interrupt blocking 2024-05-30T07:49:52+00:00 Jiawen Wu jiawenwu@trustnetic.com 2024-03-01T09:29:55+00:00 40503e6045704b0a4f071568ffaabb2eee3d9431 [ Upstream commit b4a2496c17ed645f8d51061047c9c249b58c74ba ] The register of GPIO interrupt status is masked before MAC IRQ is enabled. This is because of hardware deficiency. So manually clear the interrupt status before using them. Otherwise, GPIO interrupts will never be reported again. There is a workaround for clearing interrupts to set GPIO EOI in txgbe_up_complete(). Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20240301092956.18544-1-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b4a2496c17ed645f8d51061047c9c249b58c74ba ]

The register of GPIO interrupt status is masked before MAC IRQ
is enabled. This is because of hardware deficiency. So manually
clear the interrupt status before using them. Otherwise, GPIO
interrupts will never be reported again. There is a workaround for
clearing interrupts to set GPIO EOI in txgbe_up_complete().

Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20240301092956.18544-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: txgbe: fix to clear interrupt status after handling IRQ 2024-05-30T07:49:52+00:00 Jiawen Wu jiawenwu@trustnetic.com 2024-03-01T09:29:56+00:00 c273577b185360be2fed143f4f05ba115569c606 [ Upstream commit 0e71862a20d58b6e8d4c39de1d72c8919c4dccd1 ] GPIO EOI is not set to clear interrupt status after handling the interrupt. It should be done in irq_chip->irq_ack, but this function is not called in handle_nested_irq(). So executing function txgbe_gpio_irq_ack() manually in txgbe_gpio_irq_handler(). Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20240301092956.18544-2-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0e71862a20d58b6e8d4c39de1d72c8919c4dccd1 ]

GPIO EOI is not set to clear interrupt status after handling the
interrupt. It should be done in irq_chip->irq_ack, but this function
is not called in handle_nested_irq(). So executing function
txgbe_gpio_irq_ack() manually in txgbe_gpio_irq_handler().

Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20240301092956.18544-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: txgbe: fix to control VLAN strip 2024-05-30T07:49:52+00:00 Jiawen Wu jiawenwu@trustnetic.com 2024-05-17T06:51:40+00:00 f2205e838c31e8ed690c0acefc909c56e3b19e1c [ Upstream commit 1d3c6414950badaa38002af3b5857e01a21f01e9 ] When VLAN tag strip is changed to enable or disable, the hardware requires the Rx ring to be in a disabled state, otherwise the feature cannot be changed. Fixes: f3b03c655f67 ("net: wangxun: Implement vlan add and kill functions") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1d3c6414950badaa38002af3b5857e01a21f01e9 ]

When VLAN tag strip is changed to enable or disable, the hardware requires
the Rx ring to be in a disabled state, otherwise the feature cannot be
changed.

Fixes: f3b03c655f67 ("net: wangxun: Implement vlan add and kill functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: txgbe: use irq_domain for interrupt controller 2024-05-30T07:49:51+00:00 Jiawen Wu jiawenwu@trustnetic.com 2024-01-25T06:22:13+00:00 ffe8a87463c8bb885c42ed54540d06ed041e76dc [ Upstream commit aefd013624a10f39b0bfaee8432a235128705380 ] In the current interrupt controller, the MAC interrupt acts as the parent interrupt in the GPIO IRQ chip. But when the number of Rx/Tx ring changes, the PCI IRQ vector needs to be reallocated. Then this interrupt controller would be corrupted. So use irq_domain structure to avoid the above problem. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 1d3c6414950b ("net: txgbe: fix to control VLAN strip") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit aefd013624a10f39b0bfaee8432a235128705380 ]

In the current interrupt controller, the MAC interrupt acts as the
parent interrupt in the GPIO IRQ chip. But when the number of Rx/Tx
ring changes, the PCI IRQ vector needs to be reallocated. Then this
interrupt controller would be corrupted. So use irq_domain structure
to avoid the above problem.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 1d3c6414950b ("net: txgbe: fix to control VLAN strip")
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: txgbe: move interrupt codes to a separate file 2024-05-30T07:49:51+00:00 Jiawen Wu jiawenwu@trustnetic.com 2024-01-25T06:22:12+00:00 5a3ae5e28f899df7b2543fa5dedf03fc11838306 [ Upstream commit 63aabc3ef1961a5eb3049d02a323b3b7fabb9a23 ] In order to change the interrupt response structure, there will be a lot of code added next. Move these interrupt codes to a new file, to make the codes cleaner. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 1d3c6414950b ("net: txgbe: fix to control VLAN strip") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 63aabc3ef1961a5eb3049d02a323b3b7fabb9a23 ]

In order to change the interrupt response structure, there will be a
lot of code added next. Move these interrupt codes to a new file, to
make the codes cleaner.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 1d3c6414950b ("net: txgbe: fix to control VLAN strip")
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: wangxun: match VLAN CTAG and STAG features 2024-05-30T07:49:51+00:00 Jiawen Wu jiawenwu@trustnetic.com 2024-05-17T06:51:39+00:00 8eb5580a78a59ebac3fa87931e98f65cef12eaba [ Upstream commit ac71ab7816b675f1c9614015bd87bfccb456c394 ] Hardware requires VLAN CTAG and STAG configuration always matches. And whether VLAN CTAG or STAG changes, the configuration needs to be changed as well. Fixes: 6670f1ece2c8 ("net: txgbe: Add netdev features support") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Sai Krishna <saikrishnag@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ac71ab7816b675f1c9614015bd87bfccb456c394 ]

Hardware requires VLAN CTAG and STAG configuration always matches. And
whether VLAN CTAG or STAG changes, the configuration needs to be changed
as well.

Fixes: 6670f1ece2c8 ("net: txgbe: Add netdev features support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: wangxun: fix to change Rx features 2024-05-30T07:49:51+00:00 Jiawen Wu jiawenwu@trustnetic.com 2024-05-17T06:51:38+00:00 af61114b7c672d102a91715736be59cb6faa8d3d [ Upstream commit 68067f065ee730c7c67b361c3c81808d25d5a90b ] Fix the issue where some Rx features cannot be changed. When using ethtool -K to turn off rx offload, it returns error and displays "Could not change any device features". And netdev->features is not assigned a new value to actually configure the hardware. Fixes: 6dbedcffcf54 ("net: libwx: Implement xx_set_features ops") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 68067f065ee730c7c67b361c3c81808d25d5a90b ]

Fix the issue where some Rx features cannot be changed.

When using ethtool -K to turn off rx offload, it returns error and
displays "Could not change any device features". And netdev->features
is not assigned a new value to actually configure the hardware.

Fixes: 6dbedcffcf54 ("net: libwx: Implement xx_set_features ops")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
idpf: don't skip over ethtool tcp-data-split setting 2024-05-30T07:49:50+00:00 Michal Schmidt mschmidt@redhat.com 2024-05-15T09:24:14+00:00 da3375a9ffdf2808843ee6d9e705d6ddb135c397 [ Upstream commit 67708158e732bf03d076fba1e3d4453fbf8292a2 ] Disabling tcp-data-split on idpf silently fails: # ethtool -G $NETDEV tcp-data-split off # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: on But it works if you also change 'tx' or 'rx': # ethtool -G $NETDEV tcp-data-split off tx 256 # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: off The bug is in idpf_set_ringparam, where it takes a shortcut out if the TX and RX sizes are not changing. Fix it by checking also if the tcp-data-split setting remains unchanged. Only then can the soft reset be skipped. Fixes: 9b1aa3ef2328 ("idpf: add get/set for Ethtool's header split ringparam") Reported-by: Xu Du <xudu@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-36182 Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 67708158e732bf03d076fba1e3d4453fbf8292a2 ]

Disabling tcp-data-split on idpf silently fails:
  # ethtool -G $NETDEV tcp-data-split off
  # ethtool -g $NETDEV | grep 'TCP data split'
  TCP data split:        on

But it works if you also change 'tx' or 'rx':
  # ethtool -G $NETDEV tcp-data-split off tx 256
  # ethtool -g $NETDEV | grep 'TCP data split'
  TCP data split:        off

The bug is in idpf_set_ringparam, where it takes a shortcut out if the
TX and RX sizes are not changing. Fix it by checking also if the
tcp-data-split setting remains unchanged. Only then can the soft reset
be skipped.

Fixes: 9b1aa3ef2328 ("idpf: add get/set for Ethtool's header split ringparam")
Reported-by: Xu Du <xudu@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-36182
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
overflow: Change DEFINE_FLEX to take __counted_by member 2024-05-30T07:49:31+00:00 Kees Cook keescook@chromium.org 2024-03-06T23:51:36+00:00 2ad6aa66b779668da01344a12f86989830ad0697 [ Upstream commit d8e45f2929b94099913eb66c3ebb18b5063e9421 ] The norm should be flexible array structures with __counted_by annotations, so DEFINE_FLEX() is updated to expect that. Rename the non-annotated version to DEFINE_RAW_FLEX(), and update the few existing users. Additionally add selftests for the macros. Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d8e45f2929b94099913eb66c3ebb18b5063e9421 ]

The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.

Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
ice: make ice_vsi_cfg_txq() static 2024-05-30T07:49:31+00:00 Maciej Fijalkowski maciej.fijalkowski@intel.com 2024-01-23T11:58:46+00:00 fc646a14410797bceaefaef1d865fe73572816d7 [ Upstream commit a292ba981324ec790eb671df1c64fae5c98c4b3d ] Currently, XSK control path in ice driver calls directly ice_vsi_cfg_txq() whereas we have ice_vsi_cfg_single_txq() for that purpose. Use the latter from XSK side and make ice_vsi_cfg_txq() static. ice_vsi_cfg_txq() resides in ice_base.c and is rather big, so to reduce the code churn let us move the callers of it from ice_lib.c to ice_base.c. This change puts ice_qp_ena() on nice diet due to the checks and operations that ice_vsi_cfg_single_{r,t}xq() do internally. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-182 (-182) Function old new delta ice_xsk_pool_setup 2165 1983 -182 Total: Before=472597, After=472415, chg -0.04% Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a292ba981324ec790eb671df1c64fae5c98c4b3d ]

Currently, XSK control path in ice driver calls directly
ice_vsi_cfg_txq() whereas we have ice_vsi_cfg_single_txq() for that
purpose. Use the latter from XSK side and make ice_vsi_cfg_txq() static.

ice_vsi_cfg_txq() resides in ice_base.c and is rather big, so to reduce
the code churn let us move the callers of it from ice_lib.c to
ice_base.c.

This change puts ice_qp_ena() on nice diet due to the checks and
operations that ice_vsi_cfg_single_{r,t}xq() do internally.

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-182 (-182)
Function                                     old     new   delta
ice_xsk_pool_setup                          2165    1983    -182
Total: Before=472597, After=472415, chg -0.04%

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Sasha Levin <sashal@kernel.org>