linux-stable.git/drivers/net/ethernet/sun, branch v4.7

treewide: replace dev->trans_start update with helper

2016-05-04T18:16:49+00:00

Replace all trans_start updates with netif_trans_update helper.
change was done via spatch:

struct net_device *d;
@@
- d->trans_start = jiffies
+ netif_trans_update(d)

Compile tested only.

Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-xtensa@linux-xtensa.org
Cc: linux1394-devel@lists.sourceforge.net
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Florian Westphal 
Acked-by: Felipe Balbi 
Acked-by: Mugunthan V N 
Acked-by: Antonio Quartulli 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2016-03-19T17:05:34+00:00

Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...

ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c

2016-03-18T23:33:01+00:00

  Checkpatch updates for sunvnet.c and sunvnet_common.c.

  Signed-off-by: Aaron Young 
  Signed-off-by: Rashmi Narasimhan 
  Reviewed-by: Sowmini Varadhan 
  Reviewed-by: Alexandre Chartre 

Signed-off-by: David S. Miller

ldmvsw: Add ldmvsw.c driver code

2016-03-18T23:33:00+00:00

  Add ldmvsw.c driver

  Details:

  The ldmvsw driver very closely follows the sunvnet.c code and makes
  use of the sunvnet_common.c code for core functionality.

  A significant difference between sunvnet and ldmvsw driver is
  sunvnet creates a network interface for each vnet-port *parent*
  node in the MD while the ldmvsw driver creates a network interface
  for every vsw-port node in the Machine Description (MD).
  Therefore the netdev_priv() for sunvnet is a vnet structure while
  the netdev_priv() for ldmvsw is a vnet_port structure.

  Vnet_port structures allocated by ldmvsw have the vsw bit set.
  When finding the net_device associated with a port, the common code keys
  off this bit to use either the net_device found in the vnet_port or the
  net_device in the vnet structure (see the VNET_PORT_TO_NET_DEVICE() macro in
  sunvnet_common.h). This scheme allows the common code to work with
  both drivers with minimal changes.

  Similar to Xen, network interfaces created by the ldmvsw driver will always
  have a HW Addr (i.e. mac address) of FE:FF:FF:FF:FF:FF and each will be
  assigned the devname "vif." - where  and
   are a unique handle/port pair assigned to the associated
  vsw-port node in the MD.

  Signed-off-by: Aaron Young 
  Signed-off-by: Rashmi Narasimhan 
  Reviewed-by: Sowmini Varadhan 
  Reviewed-by: Alexandre Chartre 

Signed-off-by: David S. Miller

ldmvsw: Make sunvnet_common compatible with ldmvsw

2016-03-18T23:33:00+00:00

  Modify sunvnet common code and data structures to be compatible
  with both sunvnet and ldmvsw drivers.

  Details:

  Sunvnet operates on "vnet-port" nodes which appear in the Machine
  Description (MD) in a guest domain. Ldmvsw operates on "vsw-port"
  nodes which appear in the MD of a service domain.

  A difference between the sunvnet driver and the ldmvsw driver is
  the sunvnet driver creates a network interface (i.e. a struct net_device)
  for every vnet-port *parent* "network" node. Several vnet-ports may appear
  under this common parent network node - each corresponding to a common parent
  network interface.  Conversely, since bridge/vswitch software will need
  to interface with every vsw-port in a system, the ldmvsw driver creates
  a network interface (i.e. a struct net_device) for every vsw-port - not
  every parent node as with sunvnet.  This difference required some special
  handling in the common code as explained below.

  There are 2 key data structures used by the sunvnet and ldmvsw drivers
  (which are now found in sunvnet_common.h):

  1. struct vnet_port
     This structure represents a vnet-port node in sunvnet and a vsw-port
     in the ldmvsw driver.

  2. struct vnet
     This structure represents a parent "network" node in sunvnet and a parent
     "virtual-network-switch" node in ldmvsw.

  Since the sunvnet driver allocates a net_device for every parent "network"
  node, a net_device member appears in the struct vnet. Since the ldmvsw
  driver allocates a net_device for every port, a net_device member was
  added to the vnet_port. The common code distinguishes which structure
  net_device member to use by checking a 'vsw' bit that was added to the
  vnet_port structure. See the VNET_PORT_TO_NET_DEVICE() marco in
  sunvnet_common.h.

  The netdev_priv() in sunvnet is allocated as a vnet. The netdev_priv()
  in ldmvsw is a vnet_port. Therefore, any place in the common code
  where a netdev_priv() call was made, a wrapper function was implemented
  in each driver to first get the vnet and/or vnet_port (in a driver
  specific way) and pass them as newly added parameters to the common
  functions (see wrapper funcs: vnet_set_rx_mode() and vnet_poll_controller()).
  Since these wrapper functions call __tx_port_find(), __tx_port_find() was
  moved from the common code back into sunvnet.c. Note - ldmvsw.c does not
  require this function.

  These changes also required that port_is_up() be made
  into a common function and thus it was given a _common suffix and
  exported like the other common functions.

  A wrapper function was also added for vnet_start_xmit_common() to pass a
  driver-specific function arg to return the port associated with a given
  struct sk_buff and struct net_device. This was required because
  vnet_start_xmit_common() grabs a lock prior to getting the associated
  port. Using a function pointer arg allowed the code to work unchanged
  without risking changes to the non-trivial locking logic in
  vnet_start_xmit_common().

  Signed-off-by: Aaron Young 
  Signed-off-by: Rashmi Narasimhan 
  Reviewed-by: Sowmini Varadhan 
  Reviewed-by: Alexandre Chartre 

Signed-off-by: David S. Miller

ldmvsw: Split sunvnet driver into common code

2016-03-18T23:33:00+00:00

  Split sunvnet.c into sunvnet.c and sunvnet_common.c.

  Details:

  Since the sunvnet and ldmvsw drivers will both use common sunvnet code,
  move the functions (and support functions) anticipated to be common code
  from sunvnet.c to sunvnet_common.c. Similarly, sunvnet.h was renamed to
  sunvnet_common.h. The sunvnet_common.c code will be compiled into the
  kernel and act as a library of functions that are linked by either
  (or both) drivers when loaded.

  Function names for external functions in sunvnet_common.c (to be
  called by both the sunvnet and ldmvsw drivers) were tagged with a "_common"
  suffix to clearly designate them as common functions.

  No functional changes as of yet... just moved code verbatim to the new
  sunvnet_common.c/h files.

  Makefile/Kconfig support added to build sunvnet_common.c file. The code
  is included in the kernel if SUN_LDOMS is defined/selected.

  NOTE - per the SubmittingPatches documentation, since the code was just
  moved from one file another, the code was NOT checkpatch'd in this commit
  to aid in review.

  Signed-off-by: Aaron Young 
  Signed-off-by: Rashmi Narasimhan 
  Reviewed-by: Sowmini Varadhan 
  Reviewed-by: Alexandre Chartre 

Signed-off-by: David S. Miller

mm: introduce page reference manipulation functions

2016-03-17T22:09:34+00:00

The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count.  Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it.  Then, it is hard to find actual
reason of CMA allocation failure.  CMA allocation should be guaranteed
to succeed so finding offending place is really important.

In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function.  This is preparation step to
add tracepoint to each page reference manipulation function.  With this
facility, we can easily find reason of CMA allocation failure.  There is
no functional change in this patch.

In addition, this patch also converts reference read sites.  It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).

Signed-off-by: Joonsoo Kim 
Acked-by: Michal Nazarewicz 
Acked-by: Vlastimil Babka 
Cc: Minchan Kim 
Cc: Mel Gorman 
Cc: "Kirill A. Shutemov" 
Cc: Sergey Senozhatsky 
Cc: Steven Rostedt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2016-03-16T21:45:55+00:00

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...

sunvnet: perf tracepoint invocations to trace LDC state machine

2016-02-07T19:13:06+00:00

Use sunvnet perf trace macros to monitor LDC message exchange state.

Signed-off-by: Sowmini Varadhan 
Signed-off-by: David S. Miller

PCI: Remove includes of asm/pci-bridge.h

2016-02-05T22:29:28+00:00

Drivers should include asm/pci-bridge.h only when they need the arch-
specific things provided there.  Outside of the arch/ directories, the only
drivers that actually need things provided by asm/pci-bridge.h are the
powerpc RPA hotplug drivers in drivers/pci/hotplug/rpa*.

Remove the includes of asm/pci-bridge.h from the other drivers, adding an
include of linux/pci.h if necessary.

Signed-off-by: Bjorn Helgaas