linux-stable.git/drivers/net/ethernet/intel, branch v6.7

Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

2024-01-04T16:19:14+00:00

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-01-03 (i40e, ice, igc)

This series contains updates to i40e, ice, and igc drivers.

Ke Xiao fixes use after free for unicast filters on i40e.

Andrii restores VF MSI-X flag after PCI reset on i40e.

Paul corrects admin queue link status structure to fulfill firmware
expectations for ice.

Rodrigo Cataldo corrects value used for hicredit calculations on igc.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  igc: Fix hicredit calculation
  ice: fix Get link status data length
  i40e: Restore VF MSI-X state during PCI reset
  i40e: fix use-after-free in i40e_aqc_add_filters()
====================

Link: https://lore.kernel.org/r/20240103193254.822968-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski

Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

2024-01-04T01:02:45+00:00

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-12-27 (igc)

This series contains updates to igc driver only.

Kurt Kanzenbach resolves issues around VLAN ntuple rules; correctly
reporting back added rules and checking for valid values.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  igc: Check VLAN EtherType mask
  igc: Check VLAN TCI mask
  igc: Report VLAN EtherType matching back to user
====================

Link: https://lore.kernel.org/r/20231227210041.3035055-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski

Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

2024-01-04T01:00:15+00:00

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-12-27 (ice, i40e)

This series contains updates to ice and i40e drivers.

Katarzyna changes message to no longer be reported as error under
certain conditions as it can be expected on ice.

Ngai-Mint ensures VSI is always closed when stopping interface to
prevent NULL pointer dereference for ice.

Arkadiusz corrects reporting of phase offset value for ice.

Sudheer corrects checking on ADQ filters to prevent invalid values on
i40e.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Fix filter input checks to prevent config with invalid values
  ice: dpll: fix phase offset value
  ice: Shut down VSI with "link-down-on-close" enabled
  ice: Fix link_down_on_close message
====================

Link: https://lore.kernel.org/r/20231227182541.3033124-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski

igc: Fix hicredit calculation

2024-01-03T19:19:47+00:00

According to the Intel Software Manual for I225, Section 7.5.2.7,
hicredit should be multiplied by the constant link-rate value, 0x7736.

Currently, the old constant link-rate value, 0x7735, from the boards
supported on igb are being used, most likely due to a copy'n'paste, as
the rest of the logic is the same for both drivers.

Update hicredit accordingly.

Fixes: 1ab011b0bf07 ("igc: Add support for CBS offloading")
Reviewed-by: Kurt Kanzenbach 
Signed-off-by: Rodrigo Cataldo 
Acked-by: Vinicius Costa Gomes 
Tested-by: Naama Meir 
Signed-off-by: Tony Nguyen

ice: fix Get link status data length

2024-01-03T19:19:47+00:00

Get link status version 2 (opcode 0x0607) is returning an error because FW
expects a data length of 56 bytes, and this is causing the driver to fail
probe.

Update the get link status version 2 data length to 56 bytes by adding 5
byte reserved5 field to the end of struct ice_aqc_get_link_status_data and
passing it as parameter to offsetofend() to the fix error.

Fixes: 2777d24ec6d1 ("ice: Add ice_get_link_status_datalen")
Reviewed-by: Przemek Kitszel 
Signed-off-by: Paul Greenwalt 
Tested-by: Pucha Himasekhar Reddy  (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen

i40e: Restore VF MSI-X state during PCI reset

2024-01-03T19:18:54+00:00

During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability
register will be cleared. This can lead to issues when a VF is
assigned to a VM because in these cases the VF driver receives no
indication of the PF PCI error/reset and additionally it is incapable
of restoring the cleared flag in the hypervisor configuration space
without fully reinitializing the driver interrupt functionality.

Since the VF driver is unable to easily resolve this condition on its own,
restore the VF MSI-X flag during the PF PCI reset handling.

Fixes: 19b7960b2da1 ("i40e: implement split PCI error reset handler")
Co-developed-by: Karen Ostrowska 
Signed-off-by: Karen Ostrowska 
Co-developed-by: Mateusz Palczewski 
Signed-off-by: Mateusz Palczewski 
Reviewed-by: Wojciech Drewek 
Reviewed-by: Przemek Kitszel 
Signed-off-by: Andrii Staikov 
Tested-by: Rafal Romanowski 
Signed-off-by: Tony Nguyen

i40e: fix use-after-free in i40e_aqc_add_filters()

2024-01-03T18:27:13+00:00

Commit 3116f59c12bd ("i40e: fix use-after-free in
i40e_sync_filters_subtask()") avoided use-after-free issues,
by increasing refcount during update the VSI filter list to
the HW. However, it missed the unicast situation.

When deleting an unicast FDB entry, the i40e driver will release
the mac_filter, and i40e_service_task will concurrently request
firmware to add the mac_filter, which will lead to the following
use-after-free issue.

Fix again for both netdev->uc and netdev->mc.

BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379

CPU: 8 PID: 6379 Comm: kworker/8:7 Kdump: loaded Tainted: G
Workqueue: i40e i40e_service_task [i40e]
Call Trace:
 dump_stack+0x71/0xab
 print_address_description+0x6b/0x290
 kasan_report+0x14a/0x2b0
 i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
 i40e_sync_vsi_filters+0x1676/0x39c0 [i40e]
 i40e_service_task+0x1397/0x2bb0 [i40e]
 process_one_work+0x56a/0x11f0
 worker_thread+0x8f/0xf40
 kthread+0x2a0/0x390
 ret_from_fork+0x1f/0x40

Allocated by task 21948:
 kasan_kmalloc+0xa6/0xd0
 kmem_cache_alloc_trace+0xdb/0x1c0
 i40e_add_filter+0x11e/0x520 [i40e]
 i40e_addr_sync+0x37/0x60 [i40e]
 __hw_addr_sync_dev+0x1f5/0x2f0
 i40e_set_rx_mode+0x61/0x1e0 [i40e]
 dev_uc_add_excl+0x137/0x190
 i40e_ndo_fdb_add+0x161/0x260 [i40e]
 rtnl_fdb_add+0x567/0x950
 rtnetlink_rcv_msg+0x5db/0x880
 netlink_rcv_skb+0x254/0x380
 netlink_unicast+0x454/0x610
 netlink_sendmsg+0x747/0xb00
 sock_sendmsg+0xe2/0x120
 __sys_sendto+0x1ae/0x290
 __x64_sys_sendto+0xdd/0x1b0
 do_syscall_64+0xa0/0x370
 entry_SYSCALL_64_after_hwframe+0x65/0xca

Freed by task 21948:
 __kasan_slab_free+0x137/0x190
 kfree+0x8b/0x1b0
 __i40e_del_filter+0x116/0x1e0 [i40e]
 i40e_del_mac_filter+0x16c/0x300 [i40e]
 i40e_addr_unsync+0x134/0x1b0 [i40e]
 __hw_addr_sync_dev+0xff/0x2f0
 i40e_set_rx_mode+0x61/0x1e0 [i40e]
 dev_uc_del+0x77/0x90
 rtnl_fdb_del+0x6a5/0x860
 rtnetlink_rcv_msg+0x5db/0x880
 netlink_rcv_skb+0x254/0x380
 netlink_unicast+0x454/0x610
 netlink_sendmsg+0x747/0xb00
 sock_sendmsg+0xe2/0x120
 __sys_sendto+0x1ae/0x290
 __x64_sys_sendto+0xdd/0x1b0
 do_syscall_64+0xa0/0x370
 entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()")
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Ke Xiao 
Signed-off-by: Ding Hui 
Cc: Di Zhu 
Reviewed-by: Jan Sokolowski 
Reviewed-by: Simon Horman 
Reviewed-by: Jacob Keller 
Tested-by: Pucha Himasekhar Reddy  (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen

igc: Check VLAN EtherType mask

2023-12-27T18:26:04+00:00

Currently the driver accepts VLAN EtherType steering rules regardless of
the configured mask. And things might fail silently or with confusing error
messages to the user. The VLAN EtherType can only be matched by full
mask. Therefore, add a check for that.

For instance the following rule is invalid, but the driver accepts it and
ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
|             m 0x00ff action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        VLAN EtherType: 0x8100 mask: 0x0
|        VLAN: 0x0 mask: 0xffff
|        User-defined: 0x0 mask: 0xffffffffffffffff
|        Action: Direct to queue 0

After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
|             m 0x00ff action 0
|rmgr: Cannot insert RX class rule: Operation not supported

Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Suggested-by: Suman Ghosh 
Signed-off-by: Kurt Kanzenbach 
Acked-by: Vinicius Costa Gomes 
Reviewed-by: Simon Horman 
Tested-by: Naama Meir 
Signed-off-by: Tony Nguyen

igc: Check VLAN TCI mask

2023-12-27T18:26:04+00:00

Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.

There are two ways to handle the VLAN TCI mask:

 1. Match on the PCP field using a VLAN prio filter
 2. Match on complete TCI field using a flex filter

Therefore, add checks and code for that.

For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
|             action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        VLAN EtherType: 0x0 mask: 0xffff
|        VLAN: 0x1 mask: 0x1fff
|        User-defined: 0x0 mask: 0xffffffffffffffff
|        Action: Direct to queue 1

After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
|             action 1
|rmgr: Cannot insert RX class rule: Operation not supported

Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed")
Signed-off-by: Kurt Kanzenbach 
Acked-by: Vinicius Costa Gomes 
Reviewed-by: Simon Horman 
Tested-by: Naama Meir 
Signed-off-by: Tony Nguyen

igc: Report VLAN EtherType matching back to user

2023-12-27T18:26:04+00:00

Currently the driver allows to configure matching by VLAN EtherType.
However, the retrieval function does not report it back to the user. Add
it.

Before:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        Action: Direct to queue 0

After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        VLAN EtherType: 0x8100 mask: 0x0
|        VLAN: 0x0 mask: 0xffff
|        User-defined: 0x0 mask: 0xffffffffffffffff
|        Action: Direct to queue 0

Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Signed-off-by: Kurt Kanzenbach 
Acked-by: Vinicius Costa Gomes 
Reviewed-by: Simon Horman 
Tested-by: Naama Meir 
Signed-off-by: Tony Nguyen