linux-stable.git/drivers/net/ethernet/intel, branch linux-4.5.y

net: i40e: shut up uninitialized variable warnings

2016-01-25T23:49:36+00:00

intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring':
intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized]
intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared here
intel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized]
intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here

Signed-off-by: Arnd Bergmann 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40e: fix build warnings

2016-01-25T23:39:24+00:00

Fixes following build warnings :

drivers/net/ethernet/intel/i40e/i40e_main.c:7057:13: warning:
'i40e_sync_udp_filters_subtask' defined but not used [-Wunused-function]
drivers/net/ethernet/intel/i40e/i40e_main.c:8524:13: warning:
'i40e_add_vxlan_port' defined but not used [-Wunused-function]
drivers/net/ethernet/intel/i40e/i40e_main.c:8569:13: warning:
'i40e_del_vxlan_port' defined but not used [-Wunused-function]
drivers/net/ethernet/intel/i40e/i40e_main.c:8604:13: warning:
'i40e_add_geneve_port' defined but not used [-Wunused-function]
drivers/net/ethernet/intel/i40e/i40e_main.c:8651:13: warning:
'i40e_del_geneve_port' defined but not used [-Wunused-function]

Fixes: 6a899024058d ("i40e: geneve tunnel offload support")
Signed-off-by: Eric Dumazet 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2016-01-15T01:04:19+00:00

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  floppy: make local variable non-static
  exynos: fixes an incorrect header guard
  dt-bindings: fixes some incorrect header guards
  cpufreq-dt: correct dead link in documentation
  cpufreq: ARM big LITTLE: correct dead link in documentation
  treewide: Fix typos in printk
  Documentation: filesystem: Fix typo in fs/eventfd.c
  fs/super.c: use && instead of & for warn_on condition
  Documentation: fix sysfs-ptp
  lib: scatterlist: fix Kconfig description

Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

2016-01-08T18:31:06+00:00

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2016-01-08

This series contains updates to ixgbe only.

Vasu provides three fixes for ixgbe, first assigns a minimum credit to
a traffic class to resolve a Tx hang for CEE mode configuration.  Second
fix changes the driver to use netdev->fcoe_ddp_xid instead of our local
IXGBE_FCOE_DDP_MAX, since it is correctly set for our different devices
and avoids a DDP skip error on X550.  Lastly fix the PFC configuration
to include X550 devices.

Emil provides a fix for reporting the speed in ethtool by using the
stored value in out adapter structure.  This is due to external drivers
may end up with unknown speed when calling ethtool_get_settings().

Mark fixes the handling of any outer UDP checksum, by passing the
skb up with CHECKSUM_NONE when an outer UDP checksum is set.  This
will cause the stack to check the checksum, also do not increment an
error counter because we do not really know if there is an actual error.
Ixgbe ATR was not handling IPv6 extended headers, so ATR is not being
performed on such packets.  Fix this by skipping extended headers
when they are present.

Usha fixes an issue with X550 and getting FDMI HBA attributes when
FCoE support is enabled.

Neerav fixes an issue for X550 when FCoE and SR-IOV are enabled, which
the hardware generates MDD events.  Resolve this by setting the expected
values in the transmit context descriptors for FCoE/FIP frames and
adding a flush after writing the RDLEN register.
====================

Signed-off-by: David S. Miller

ixgbe: Make ATR recognize IPv6 extended headers

2016-01-08T12:18:43+00:00

Right now ATR is not handling IPv6 extended headers, so ATR is not
being performed on such packets. Fix that by skipping extended
headers when they are present. This also fixes a problem where
the ATR code was not checking that the inner protocol was actually
TCP before setting up the signature rules. Since the protocol check
is intimately involved with the extended header processing as well,
this all gets fixed together.

Signed-off-by: Mark Rustad 
Tested-by: Phil Schmitt 
Signed-off-by: Jeff Kirsher

ixgbe: Fix MDD events generated when FCoE+SRIOV are enabled

2016-01-08T12:15:00+00:00

When FCoE is enabled with SR-IOV on the X550 NIC the hardware
generates MDD events.

This patch fixes these by setting the expected values in the
Tx context descriptors for FCoE/FIP frames and adding a flush
after writing the RDLEN register.

Signed-off-by: Neerav Parikh 
Tested-by: Phil Schmitt 
Signed-off-by: Jeff Kirsher

ixgbe: Fix to get FDMI HBA attributes information with X550

2016-01-08T12:11:21+00:00

Check whether the FCOE support is enabled for the devices to get the
 FDMI HBA attributes information instead of checking each device id.
Also, add Model string information for X550.

Signed-off-by: Usha Ketineni 
Tested-by: Phil Schmitt 
Signed-off-by: Jeff Kirsher

ixgbe: Correct handling of any outer UDP checksum setting

2016-01-08T12:06:49+00:00

If an outer UDP checksum is set, pass the skb up with CHECKSUM_NONE
so that the stack will check the checksum. Do not increment an
error counter, because we don't know that there is an actual error.

Signed-off-by: Mark Rustad 
Signed-off-by: Jeff Kirsher

ixgbe: do not call check_link for ethtool in ixgbe_get_settings()

2016-01-08T11:57:49+00:00

In ixgbe_get_settings() the link status and speed of the interface
are determined based on a read from the LINKS register via the call
to mac.ops.check.link(). This can cause issues where external drivers
may end up with unknown speed when calling ethtool_get_setings().

Instead of calling the mac.ops.check_link() we can report the speed
from the adapter structure which is populated by the driver.

Signed-off-by: Emil Tantilov 
Tested-by: Phil Schmitt 
Signed-off-by: Jeff Kirsher

ixgbe: fix broken PFC with X550

2016-01-08T11:54:08+00:00

PFC is configuration is skipped for X550 devices due to a incorrect
device id check, fixing that to include X550 PFC configuration.

Signed-off-by: Vasu Dev 
Tested-by: Phil Schmitt 
Signed-off-by: Jeff Kirsher