linux-stable.git/drivers/net/ethernet/amazon, branch v6.3

net: ena: take into account xdp_features setting tx/rx queues

2023-03-11T05:33:48+00:00

ena nic allows xdp just if enough hw queues are available for XDP.
Take into account queues configuration setting xdp_features.

Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Reviewed-by: Shay Agroskin 
Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Jakub Kicinski

drivers: net: turn on XDP features

2023-02-03T04:48:23+00:00

A summary of the flags being set for various drivers is given below.
Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features
that can be turned off and on at runtime. This means that these flags
may be set and unset under RTNL lock protection by the driver. Hence,
READ_ONCE must be used by code loading the flag value.

Also, these flags are not used for synchronization against the availability
of XDP resources on a device. It is merely a hint, and hence the read
may race with the actual teardown of XDP resources on the device. This
may change in the future, e.g. operations taking a reference on the XDP
resources of the driver, and in turn inhibiting turning off this flag.
However, for now, it can only be used as a hint to check whether device
supports becoming a redirection target.

Turn 'hw-offload' feature flag on for:
 - netronome (nfp)
 - netdevsim.

Turn 'native' and 'zerocopy' features flags on for:
 - intel (i40e, ice, ixgbe, igc)
 - mellanox (mlx5).
 - stmmac
 - netronome (nfp)

Turn 'native' features flags on for:
 - amazon (ena)
 - broadcom (bnxt)
 - freescale (dpaa, dpaa2, enetc)
 - funeth
 - intel (igb)
 - marvell (mvneta, mvpp2, octeontx2)
 - mellanox (mlx4)
 - mtk_eth_soc
 - qlogic (qede)
 - sfc
 - socionext (netsec)
 - ti (cpsw)
 - tap
 - tsnep
 - veth
 - xen
 - virtio_net.

Turn 'basic' (tx, pass, aborted and drop) features flags on for:
 - netronome (nfp)
 - cavium (thunder)
 - hyperv.

Turn 'redirect_target' feature flag on for:
 - amanzon (ena)
 - broadcom (bnxt)
 - freescale (dpaa, dpaa2)
 - intel (i40e, ice, igb, ixgbe)
 - ti (cpsw)
 - marvell (mvneta, mvpp2)
 - sfc
 - socionext (netsec)
 - qlogic (qede)
 - mellanox (mlx5)
 - tap
 - veth
 - virtio_net
 - xen

Reviewed-by: Gerhard Engleder 
Reviewed-by: Simon Horman 
Acked-by: Stanislav Fomichev 
Acked-by: Jakub Kicinski 
Co-developed-by: Kumar Kartikeya Dwivedi 
Signed-off-by: Kumar Kartikeya Dwivedi 
Co-developed-by: Lorenzo Bianconi 
Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Marek Majtyka 
Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov

net: ena: Update NUMA TPH hint register upon NUMA node update

2022-12-30T07:43:44+00:00

The device supports a PCIe optimization hint, which indicates on
which NUMA the queue is currently processed. This hint is utilized
by PCIe in order to reduce its access time by accessing the
correct NUMA resources and maintaining cache coherence.

The driver calls the register update for the hint (called TPH -
TLP Processing Hint) during the NAPI loop.

Though the update is expected upon a NUMA change (when a queue
is moved from one NUMA to the other), the current logic performs
a register update when the queue is moved to a different CPU,
but the CPU is not necessarily in a different NUMA.

The changes include:
1. Performing the TPH update only when the queue has switched
a NUMA node.
2. Moving the TPH update call to be triggered only when NAPI was
scheduled from interrupt context, as opposed to a busy-polling loop.
This is due to the fact that during busy-polling, the frequency
of CPU switches for a particular queue is significantly higher,
thus, the likelihood to switch NUMA is much higher. Therefore,
providing the frequent updates to the device upon a NUMA update
are unlikely to be beneficial.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: David Arinzon 
Signed-off-by: David S. Miller

net: ena: Set default value for RX interrupt moderation

2022-12-30T07:43:44+00:00

RX ring can be NULL in XDP use cases where only TX queues
are configured. In this scenario, the RX interrupt moderation
value sent to the device remains in its default value of 0.

In this change, setting the default value of the RX interrupt
moderation to be the same as of the TX.

Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: David Arinzon 
Signed-off-by: David S. Miller

net: ena: Fix rx_copybreak value update

2022-12-30T07:43:44+00:00

Make the upper bound on rx_copybreak tighter, by
making sure it is smaller than the minimum of mtu and
ENA_PAGE_SIZE. With the current upper bound of mtu,
rx_copybreak can be larger than a page. Such large
rx_copybreak will not bring any performance benefit to
the user and therefore makes no sense.

In addition, the value update was only reflected in
the adapter structure, but not applied for each ring,
causing it to not take effect.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Osama Abboud 
Signed-off-by: Arthur Kiyanovski 
Signed-off-by: David Arinzon 
Signed-off-by: David S. Miller

net: ena: Use bitmask to indicate packet redirection

2022-12-30T07:43:44+00:00

Redirecting packets with XDP Redirect is done in two phases:
1. A packet is passed by the driver to the kernel using
   xdp_do_redirect().
2. After finishing polling for new packets the driver lets the kernel
   know that it can now process the redirected packet using
   xdp_do_flush_map().
   The packets' redirection is handled in the napi context of the
   queue that called xdp_do_redirect()

To avoid calling xdp_do_flush_map() each time the driver first checks
whether any packets were redirected, using
	xdp_flags |= xdp_verdict;
and
	if (xdp_flags & XDP_REDIRECT)
	    xdp_do_flush_map()

essentially treating XDP instructions as a bitmask, which isn't the case:
    enum xdp_action {
	    XDP_ABORTED = 0,
	    XDP_DROP,
	    XDP_PASS,
	    XDP_TX,
	    XDP_REDIRECT,
    };

Given the current possible values of xdp_action, the current design
doesn't have a bug (since XDP_REDIRECT = 100b), but it is still
flawed.

This patch makes the driver use a bitmask instead, to avoid future
issues.

Fixes: a318c70ad152 ("net: ena: introduce XDP redirect implementation")
Signed-off-by: Shay Agroskin 
Signed-off-by: David Arinzon 
Signed-off-by: David S. Miller

net: ena: Account for the number of processed bytes in XDP

2022-12-30T07:43:43+00:00

The size of packets that were forwarded or dropped by XDP wasn't added
to the total processed bytes statistic.

Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin 
Signed-off-by: David Arinzon 
Signed-off-by: David S. Miller

net: ena: Don't register memory info on XDP exchange

2022-12-30T07:43:43+00:00

Since the queues aren't destroyed when we only exchange XDP programs,
there's no need to re-register them again.

Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin 
Signed-off-by: David Arinzon 
Signed-off-by: David S. Miller

net: ena: Fix toeplitz initial hash value

2022-12-30T07:43:43+00:00

On driver initialization, RSS hash initial value is set to zero,
instead of the default value. This happens because we pass NULL as
the RSS key parameter, which caused us to never initialize
the RSS hash value.

This patch fixes it by making sure the initial value is set, no matter
what the value of the RSS key is.

Fixes: 91a65b7d3ed8 ("net: ena: fix potential crash when rxfh key is NULL")
Signed-off-by: Nati Koler 
Signed-off-by: David Arinzon 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-11-18T02:30:39+00:00

include/linux/bpf.h
  1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value")
  aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record")
  f71b2f64177a ("bpf: Refactor map->off_arr handling")
https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/

Signed-off-by: Jakub Kicinski