linux-stable.git/drivers/net/dsa, branch v5.4.166 Linux kernel stable tree net: dsa: rtl8366rb: Fix off-by-one bug 2021-11-17T08:48:34+00:00 Linus Walleij linus.walleij@linaro.org 2021-09-25T22:59:27+00:00 7c12c2fe4568e9e5a1675ca6c70914acefb586b6 [ Upstream commit 5f5f12f5d4b108399130bb5c11f07765851d9cdb ] The max VLAN number with non-4K VLAN activated is 15, and the range is 0..15. Not 16. The impact should be low since we by default have 4K VLAN and thus have 4095 VLANs to play with in this switch. There will not be a problem unless the code is rewritten to only use 16 VLANs. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Cc: Mauri Sandberg <sandberg@mailfence.com> Cc: DENG Qingfang <dqfext@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5f5f12f5d4b108399130bb5c11f07765851d9cdb ]

The max VLAN number with non-4K VLAN activated is 15, and the
range is 0..15. Not 16.

The impact should be low since we by default have 4K VLAN and
thus have 4095 VLANs to play with in this switch. There will
not be a problem unless the code is rewritten to only use
16 VLANs.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: lantiq_gswip: fix register definition 2021-10-27T07:54:25+00:00 Aleksander Jan Bajkowski olek2@wp.pl 2021-10-15T22:10:20+00:00 599766696f6958d68258f126a5f6c9f9d58208e4 [ Upstream commit 66d262804a2276721eac86cf18fcd61046149193 ] I compared the register definitions with the D-Link DWR-966 GPL sources and found that the PUAFD field definition was incorrect. This definition is unused and causes no issues. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 66d262804a2276721eac86cf18fcd61046149193 ]

I compared the register definitions with the D-Link DWR-966
GPL sources and found that the PUAFD field definition was
incorrect. This definition is unused and causes no issues.

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: b53: Fix calculating number of switch ports 2021-09-22T10:26:45+00:00 Rafał Miłecki rafal@milecki.pl 2021-09-02T08:30:50+00:00 b79204169de5941e645a011b3a45c1c40b0800bd [ Upstream commit cdb067d31c0fe4cce98b9d15f1f2ef525acaa094 ] It isn't true that CPU port is always the last one. Switches BCM5301x have 9 ports (port 6 being inactive) and they use port 5 as CPU by default (depending on design some other may be CPU ports too). A more reliable way of determining number of ports is to check for the last set bit in the "enabled_ports" bitfield. This fixes b53 internal state, it will allow providing accurate info to the DSA and is required to fix BCM5301x support. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cdb067d31c0fe4cce98b9d15f1f2ef525acaa094 ]

It isn't true that CPU port is always the last one. Switches BCM5301x
have 9 ports (port 6 being inactive) and they use port 5 as CPU by
default (depending on design some other may be CPU ports too).

A more reliable way of determining number of ports is to check for the
last set bit in the "enabled_ports" bitfield.

This fixes b53 internal state, it will allow providing accurate info to
the DSA and is required to fix BCM5301x support.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: lantiq_gswip: fix maximum frame length 2021-09-22T10:26:38+00:00 Jan Hoffmann jan@3e8.eu 2021-09-01T18:49:33+00:00 90358cb02a6c760648b51aac4728294e993d02cd commit 552799f8b3b0074d2617f53a63a088f9514a66e3 upstream. Currently, outgoing packets larger than 1496 bytes are dropped when tagged VLAN is used on a switch port. Add the frame check sequence length to the value of the register GSWIP_MAC_FLEN to fix this. This matches the lantiq_ppa vendor driver, which uses a value consisting of 1518 bytes for the MAC frame, plus the lengths of special tag and VLAN tags. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Cc: stable@vger.kernel.org Signed-off-by: Jan Hoffmann <jan@3e8.eu> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 552799f8b3b0074d2617f53a63a088f9514a66e3 upstream.

Currently, outgoing packets larger than 1496 bytes are dropped when
tagged VLAN is used on a switch port.

Add the frame check sequence length to the value of the register
GSWIP_MAC_FLEN to fix this. This matches the lantiq_ppa vendor driver,
which uses a value consisting of 1518 bytes for the MAC frame, plus the
lengths of special tag and VLAN tags.

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: dsa: mt7530: fix VLAN traffic leaks again 2021-09-03T08:08:16+00:00 DENG Qingfang dqfext@gmail.com 2021-08-11T09:50:43+00:00 620681d7201a6795a485123e943a138d5c434414 commit 7428022b50d0fbb4846dd0f00639ea09d36dff02 upstream. When a port leaves a VLAN-aware bridge, the current code does not clear other ports' matrix field bit. If the bridge is later set to VLAN-unaware mode, traffic in the bridge may leak to that port. Remove the VLAN filtering check in mt7530_port_bridge_leave. Fixes: 474a2ddaa192 ("net: dsa: mt7530: fix VLAN traffic leaks") Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7428022b50d0fbb4846dd0f00639ea09d36dff02 upstream.

When a port leaves a VLAN-aware bridge, the current code does not clear
other ports' matrix field bit. If the bridge is later set to VLAN-unaware
mode, traffic in the bridge may leak to that port.

Remove the VLAN filtering check in mt7530_port_bridge_leave.

Fixes: 474a2ddaa192 ("net: dsa: mt7530: fix VLAN traffic leaks")
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: dsa: sja1105: fix broken backpressure in .port_fdb_dump 2021-08-18T06:57:00+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2021-08-10T11:19:56+00:00 f6eee53beb078ed2ecfd1c858dea1aec90d37e0e [ Upstream commit 21b52fed928e96d2f75d2f6aa9eac7a4b0b55d22 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 21b52fed928e96d2f75d2f6aa9eac7a4b0b55d22 ]

rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).

When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.

Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.

Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.

Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: lantiq: fix broken backpressure in .port_fdb_dump 2021-08-18T06:57:00+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2021-08-10T11:19:55+00:00 1e6a570d37867d27e604dc5286ab1f35445ee080 [ Upstream commit 871a73a1c8f55da0a3db234e9dd816ea4fd546f2 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 58c59ef9e930 ("net: dsa: lantiq: Add Forwarding Database access") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 871a73a1c8f55da0a3db234e9dd816ea4fd546f2 ]

rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).

When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.

Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.

Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.

Fixes: 58c59ef9e930 ("net: dsa: lantiq: Add Forwarding Database access")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: lan9303: fix broken backpressure in .port_fdb_dump 2021-08-18T06:57:00+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2021-08-10T11:19:54+00:00 564f6bbd0ed697007015b19e7b85bc79564b5c61 [ Upstream commit ada2fee185d8145afb89056558bb59545b9dbdd0 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: ab335349b852 ("net: dsa: lan9303: Add port_fast_age and port_fdb_dump methods") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ada2fee185d8145afb89056558bb59545b9dbdd0 ]

rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).

When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.

Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.

Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.

Fixes: ab335349b852 ("net: dsa: lan9303: Add port_fast_age and port_fdb_dump methods")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: microchip: Fix ksz_read64() 2021-08-18T06:56:59+00:00 Ben Hutchings ben.hutchings@mind.be 2021-08-09T22:59:12+00:00 13a381b8bc22fe784815b73502c131c6dc04e0fa [ Upstream commit c34f674c8875235725c3ef86147a627f165d23b4 ] ksz_read64() currently does some dubious byte-swapping on the two halves of a 64-bit register, and then only returns the high bits. Replace this with a straightforward expression. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c34f674c8875235725c3ef86147a627f165d23b4 ]

ksz_read64() currently does some dubious byte-swapping on the two
halves of a 64-bit register, and then only returns the high bits.
Replace this with a straightforward expression.

Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver")
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: mt7530: add the missing RxUnicast MIB counter 2021-08-18T06:56:58+00:00 DENG Qingfang dqfext@gmail.com 2021-08-06T04:05:27+00:00 af7f1539cfb14f820565100d902a2316aea2d237 [ Upstream commit aff51c5da3208bd164381e1488998667269c6cf4 ] Add the missing RxUnicast counter. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit aff51c5da3208bd164381e1488998667269c6cf4 ]

Add the missing RxUnicast counter.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>