linux-stable.git/drivers/net/dsa, branch v4.13.2

net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278

2017-08-30T23:02:42+00:00

BCM7278 has only 128 entries while BCM7445 has the full 256 entries set,
fix that.

Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
Signed-off-by: Florian Fainelli 
Reviewed-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: dsa: mediatek: add adjust link support for user ports

2017-08-09T01:01:25+00:00

Manually adjust the port settings of user ports once PHY polling has
completed. This patch extends the adjust_link callback to configure the
per port PMCR register, applying the proper values polled from the PHY.
Without this patch flow control was not always getting setup properly.

Signed-off-by: Shashidhar Lakkavalli 
Signed-off-by: Muciri Gatimu 
Signed-off-by: John Crispin 
Signed-off-by: David S. Miller

net: dsa: b53: Add missing ARL entries for BCM53125

2017-07-20T22:21:54+00:00

The BCM53125 entry was missing an arl_entries member which would
basically prevent the ARL search from terminating properly. This switch
has 4 ARL entries, so add that.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli 
Reviewed-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: Enable CMODE config support for 6390X

2017-07-20T05:26:01+00:00

Commit f39908d3b1c45 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390
ports 9 & 10') added support for setting the CMODE for the 6390X family,
but only enabled it for 9290 and 6390 - and left out 6390X.

Fix support for setting the CMODE on 6390X also by assigning
mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in
mv88e6390x_ops too.

Fixes: f39908d3b1c4 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10")
Signed-off-by: Martin Hundebøll 
Reviewed-by: Andrew Lunn 
Reviewed-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: fix error code in mv88e6390_serdes_power()

2017-06-25T15:42:33+00:00

We're accidentally returning the wrong variable.  "cmode" is
uninitialized at this point so it causes a static checker warning.

Fixes: 6335e9f2446b ("net: dsa: mv88e6xxx: mv88e6390X SERDES support")
Signed-off-by: Dan Carpenter 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: dsa: bcm_sf2: Remove special handling of "internal" phy-mode

2017-06-23T19:06:43+00:00

The PHY library now supports an "internal" phy-mode, thus making our
custom parsing code now unnecessary.

Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: better IEEE Prio Mapping Table description

2017-06-20T17:27:01+00:00

Kill the remaining shift macro in favor of calculating at compile time
its value from the more descriptive mask, which gives us a better
representation of the register layout.

Signed-off-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: prefix Global 2 remaining macros

2017-06-20T17:24:43+00:00

Prefix and document the remaining Global 2 registers macros.

Signed-off-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: prefix Global 2 Watchdog macros

2017-06-20T17:24:43+00:00

The Marvell 88E6352 family has a Global 2 register dedicated to the
watchdog setup. But the 88E6390 turned it into an indirect table.

Prefix and document that.

Signed-off-by: Vivien Didelot 
Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: prefix Global 2 Switch MAC macros

2017-06-20T17:24:43+00:00

Prefix and document the Global 2 Switch MAC registers macros.

Signed-off-by: Vivien Didelot 
Signed-off-by: David S. Miller