linux-stable.git/drivers/net/can, branch v5.12.2

can: mcp251x: fix support for half duplex SPI host controllers

2021-04-06T10:31:21+00:00

Some SPI host controllers do not support full-duplex SPI transfers.

The function mcp251x_spi_trans() does a full duplex transfer. It is
used in several places in the driver, where a TX half duplex transfer
is sufficient.

To fix support for half duplex SPI host controllers, this patch
introduces a new function mcp251x_spi_write() and changes all callers
that do a TX half duplex transfer to use mcp251x_spi_write().

Fixes: e0e25001d088 ("can: mcp251x: add support for half duplex controllers")
Link: https://lore.kernel.org/r/20210330100246.1074375-1-mkl@pengutronix.de
Cc: Tim Harvey 
Tested-By: Tim Harvey 
Reported-by: Gerhard Bertelsmann 
Signed-off-by: Marc Kleine-Budde

drivers: net: fix memory leak in peak_usb_create_dev

2021-04-01T22:55:15+00:00

syzbot reported memory leak in peak_usb.
The problem was in case of failure after calling
->dev_init()[2] in peak_usb_create_dev()[1]. The data
allocated int dev_init() wasn't freed, so simple
->dev_free() call fix this problem.

backtrace:
    [<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline]
    [<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868   [2]
    [<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1]
    [<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949

Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-03-25T01:16:04+00:00

Pull networking fixes from David Miller:
 "Various fixes, all over:

   1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.

   2) Always store the rx queue mapping in veth, from Maciej
      Fijalkowski.

   3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.

   4) Fix memory leak in octeontx2-af from Colin Ian King.

   5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
      Yonghong Song.

   6) Fix tx ptp stats in mlx5, from Aya Levin.

   7) Check correct ip version in tun decap, fropm Roi Dayan.

   8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.

   9) Work item memork leak in mlx5, from Shay Drory.

  10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.

  11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.

  12) Fix data race in pxa168_eth, from Pavel Andrianov.

  13) Range validate stab in red_check_params(), from Eric Dumazet.

  14) Inherit vlan filtering setting properly in b53 driver, from
      Florian Fainelli.

  15) Fix rtnl locking in igc driver, from Sasha Neftin.

  16) Pause handling fixes in igc driver, from Muhammad Husaini
      Zulkifli.

  17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.

  18) Use after free in qlcnic, from Lv Yunlong.

  19) fix crash in fritzpci mISDN, from Tong Zhang.

  20) Premature rx buffer reuse in igb, from Li RongQing.

  21) Missing termination of ip[a driver message handler arrays, from
      Alex Elder.

  22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
      driver, from Xie He.

  23) Use after free in c_can_pci_remove(), from Tong Zhang.

  24) Uninitialized variable use in nl80211, from Jarod Wilson.

  25) Off by one size calc in bpf verifier, from Piotr Krysiuk.

  26) Use delayed work instead of deferrable for flowtable GC, from
      Yinjun Zhang.

  27) Fix infinite loop in NPC unmap of octeontx2 driver, from
      Hariprasad Kelam.

  28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
      of fifo sizes, from Corentin Labbe.

  29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.

  30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.

  31) Fix psample UAPI breakage, from Ido Schimmel"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
  psample: Fix user API breakage
  math: Export mul_u64_u64_div_u64
  ch_ktls: fix enum-conversion warning
  octeontx2-af: Fix memory leak of object buf
  ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
  net: bridge: don't notify switchdev for local FDB addresses
  net/sched: act_ct: clear post_ct if doing ct_clear
  net: dsa: don't assign an error value to tag_ops
  isdn: capi: fix mismatched prototypes
  net/mlx5: SF, do not use ecpu bit for vhca state processing
  net/mlx5e: Fix division by 0 in mlx5e_select_queue
  net/mlx5e: Fix error path for ethtool set-priv-flag
  net/mlx5e: Offload tuple rewrite for non-CT flows
  net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
  net/mlx5: Add back multicast stats for uplink representor
  net: ipconfig: ic_dev can be NULL in ic_close_devs
  MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
  docs: networking: Fix a typo
  r8169: fix DMA being used after buffer free if WoL is enabled
  net: ipa: fix init header command validation
  ...

can: peak_usb: Revert "can: peak_usb: add forgotten supported devices"

2021-03-20T19:28:45+00:00

In commit 6417f03132a6 ("module: remove never implemented
MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was
removed from the kerne entirely. Shortly before this patch was applied
mainline the commit 59ec7b89ed3e ("can: peak_usb: add forgotten
supported devices") was added to net/master. As this would result in a
merge conflict, let's revert this patch.

Fixes: 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices")
Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.de
Suggested-by: Leon Romanovsky 
Cc: Stephane Grosjean 
Signed-off-by: Marc Kleine-Budde

module: remove never implemented MODULE_SUPPORTED_DEVICE

2021-03-17T20:16:18+00:00

MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.

Signed-off-by: Leon Romanovsky 
Signed-off-by: Linus Torvalds

can: m_can: m_can_rx_peripheral(): fix RX being blocked by errors

2021-03-16T07:41:27+00:00

For M_CAN peripherals, m_can_rx_handler() was called with quota = 1,
which caused any error handling to block RX from taking place until
the next time the IRQ handler is called. This had been observed to
cause RX to be blocked indefinitely in some cases.

This is fixed by calling m_can_rx_handler with a sensibly high quota.

Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Link: https://lore.kernel.org/r/20210303144350.4093750-1-torin@maxiluxsystems.com
Suggested-by: Marc Kleine-Budde 
Signed-off-by: Torin Cooper-Bennun 
Signed-off-by: Marc Kleine-Budde

can: m_can: m_can_do_rx_poll(): fix extraneous msg loss warning

2021-03-16T07:41:27+00:00

Message loss from RX FIFO 0 is already handled in
m_can_handle_lost_msg(), with netdev output included.

Removing this warning also improves driver performance under heavy
load, where m_can_do_rx_poll() may be called many times before this
interrupt is cleared, causing this message to be output many
times (thanks Mariusz Madej for this report).

Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://lore.kernel.org/r/20210303103151.3760532-1-torin@maxiluxsystems.com
Reported-by: Mariusz Madej 
Signed-off-by: Torin Cooper-Bennun 
Signed-off-by: Marc Kleine-Budde

can: c_can: move runtime PM enable/disable to c_can_platform

2021-03-16T07:41:27+00:00

Currently doing modprobe c_can_pci will make the kernel complain:

    Unbalanced pm_runtime_enable!

this is caused by pm_runtime_enable() called before pm is initialized.

This fix is similar to 227619c3ff7c, move those pm_enable/disable code
to c_can_platform.

Fixes: 4cdd34b26826 ("can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller")
Link: http://lore.kernel.org/r/20210302025542.987600-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang 
Tested-by: Uwe Kleine-König 
Signed-off-by: Marc Kleine-Budde

can: c_can_pci: c_can_pci_remove(): fix use-after-free

2021-03-16T07:41:27+00:00

There is a UAF in c_can_pci_remove(). dev is released by
free_c_can_dev() and is used by pci_iounmap(pdev, priv->base) later.
To fix this issue, save the mmio address before releasing dev.

Fixes: 5b92da0443c2 ("c_can_pci: generic module for C_CAN/D_CAN on PCI")
Link: https://lore.kernel.org/r/20210301024512.539039-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang 
Signed-off-by: Marc Kleine-Budde

can: kvaser_usb: Add support for USBcan Pro 4xHS

2021-03-16T07:41:26+00:00

Add support for Kvaser USBcan Pro 4xHS.

Link: https://lore.kernel.org/r/20210309091724.31262-2-jimmyassarsson@gmail.com
Signed-off-by: Jimmy Assarsson 
Signed-off-by: Marc Kleine-Budde