linux-stable.git/drivers/net/can, branch v4.4.271

drivers: net: fix memory leak in peak_usb_create_dev

2021-04-16T10:00:22+00:00

commit a0b96b4a62745397aee662670cfc2157bac03f55 upstream.

syzbot reported memory leak in peak_usb.
The problem was in case of failure after calling
->dev_init()[2] in peak_usb_create_dev()[1]. The data
allocated int dev_init() wasn't freed, so simple
->dev_free() call fix this problem.

backtrace:
    [<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline]
    [<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868   [2]
    [<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1]
    [<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949

Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

can: flexcan: flexcan_chip_freeze(): fix chip freeze for missing bitrate

2021-04-10T11:01:58+00:00

commit 47c5e474bc1e1061fb037d13b5000b38967eb070 upstream.

For cases when flexcan is built-in, bitrate is still not set at
registering. So flexcan_chip_freeze() generates:

[    1.860000] *** ZERO DIVIDE ***   FORMAT=4
[    1.860000] Current process id is 1
[    1.860000] BAD KERNEL TRAP: 00000000
[    1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8

To allow chip freeze, using an hardcoded timeout when bitrate is still
not set.

Fixes: ec15e27cc890 ("can: flexcan: enable RX FIFO after FRZ/HALT valid")
Link: https://lore.kernel.org/r/20210315231510.650593-1-angelo@kernel-space.org
Signed-off-by: Angelo Dureghello 
[mkl: use if instead of ? operator]
Signed-off-by: Marc Kleine-Budde 
Cc: Koen Vandeputte 
Signed-off-by: Greg Kroah-Hartman

can: dev: Move device back to init netns on owning netns delete

2021-03-30T12:45:01+00:00

commit 3a5ca857079ea022e0b1b17fc154f7ad7dbc150f upstream.

When a non-initial netns is destroyed, the usual policy is to delete
all virtual network interfaces contained, but move physical interfaces
back to the initial netns. This keeps the physical interface visible
on the system.

CAN devices are somewhat special, as they define rtnl_link_ops even
if they are physical devices. If a CAN interface is moved into a
non-initial netns, destroying that netns lets the interface vanish
instead of moving it back to the initial netns. default_device_exit()
skips CAN interfaces due to having rtnl_link_ops set. Reproducer:

  ip netns add foo
  ip link set can0 netns foo
  ip netns delete foo

WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60
CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1
Workqueue: netns cleanup_net
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x94/0xa8)
[] (dump_stack) from [] (__warn+0xb8/0x114)
[] (__warn) from [] (warn_slowpath_fmt+0x7c/0xac)
[] (warn_slowpath_fmt) from [] (ops_exit_list+0x38/0x60)
[] (ops_exit_list) from [] (cleanup_net+0x230/0x380)
[] (cleanup_net) from [] (process_one_work+0x1d8/0x438)
[] (process_one_work) from [] (worker_thread+0x64/0x5a8)
[] (worker_thread) from [] (kthread+0x148/0x14c)
[] (kthread) from [] (ret_from_fork+0x14/0x2c)

To properly restore physical CAN devices to the initial netns on owning
netns exit, introduce a flag on rtnl_link_ops that can be set by drivers.
For CAN devices setting this flag, default_device_exit() considers them
non-virtual, applying the usual namespace move.

The issue was introduced in the commit mentioned below, as at that time
CAN devices did not have a dellink() operation.

Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.")
Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org
Signed-off-by: Martin Willi 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: m_can: m_can_do_rx_poll(): fix extraneous msg loss warning

2021-03-30T12:45:00+00:00

[ Upstream commit c0e399f3baf42279f48991554240af8c457535d1 ]

Message loss from RX FIFO 0 is already handled in
m_can_handle_lost_msg(), with netdev output included.

Removing this warning also improves driver performance under heavy
load, where m_can_do_rx_poll() may be called many times before this
interrupt is cleared, causing this message to be output many
times (thanks Mariusz Madej for this report).

Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://lore.kernel.org/r/20210303103151.3760532-1-torin@maxiluxsystems.com
Reported-by: Mariusz Madej 
Signed-off-by: Torin Cooper-Bennun 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: c_can: move runtime PM enable/disable to c_can_platform

2021-03-30T12:45:00+00:00

[ Upstream commit 6e2fe01dd6f98da6cae8b07cd5cfa67abc70d97d ]

Currently doing modprobe c_can_pci will make the kernel complain:

    Unbalanced pm_runtime_enable!

this is caused by pm_runtime_enable() called before pm is initialized.

This fix is similar to 227619c3ff7c, move those pm_enable/disable code
to c_can_platform.

Fixes: 4cdd34b26826 ("can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller")
Link: http://lore.kernel.org/r/20210302025542.987600-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang 
Tested-by: Uwe Kleine-König 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: c_can_pci: c_can_pci_remove(): fix use-after-free

2021-03-30T12:45:00+00:00

[ Upstream commit 0429d6d89f97ebff4f17f13f5b5069c66bde8138 ]

There is a UAF in c_can_pci_remove(). dev is released by
free_c_can_dev() and is used by pci_iounmap(pdev, priv->base) later.
To fix this issue, save the mmio address before releasing dev.

Fixes: 5b92da0443c2 ("c_can_pci: generic module for C_CAN/D_CAN on PCI")
Link: https://lore.kernel.org/r/20210301024512.539039-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: flexcan: enable RX FIFO after FRZ/HALT valid

2021-03-17T15:07:19+00:00

commit ec15e27cc8904605846a354bb1f808ea1432f853 upstream.

RX FIFO enable failed could happen when do system reboot stress test:

[    0.303958] flexcan 5a8d0000.can: 5a8d0000.can supply xceiver not found, using dummy regulator
[    0.304281] flexcan 5a8d0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core
[    0.314640] flexcan 5a8d0000.can: registering netdev failed
[    0.320728] flexcan 5a8e0000.can: 5a8e0000.can supply xceiver not found, using dummy regulator
[    0.320991] flexcan 5a8e0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core
[    0.331360] flexcan 5a8e0000.can: registering netdev failed
[    0.337444] flexcan 5a8f0000.can: 5a8f0000.can supply xceiver not found, using dummy regulator
[    0.337716] flexcan 5a8f0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core
[    0.348117] flexcan 5a8f0000.can: registering netdev failed

RX FIFO should be enabled after the FRZ/HALT are valid. But the current
code enable RX FIFO and FRZ/HALT at the same time.

Fixes: e955cead03117 ("CAN: Add Flexcan CAN controller driver")
Link: https://lore.kernel.org/r/20210218110037.16591-3-qiangqing.zhang@nxp.com
Signed-off-by: Joakim Zhang 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: flexcan: assert FRZ bit in flexcan_chip_freeze()

2021-03-17T15:07:19+00:00

commit 449052cfebf624b670faa040245d3feed770d22f upstream.

Assert HALT bit to enter freeze mode, there is a premise that FRZ bit is
asserted. This patch asserts FRZ bit in flexcan_chip_freeze, although
the reset value is 1b'1. This is a prepare patch, later patch will
invoke flexcan_chip_freeze() to enter freeze mode, which polling freeze
mode acknowledge.

Fixes: b1aa1c7a2165b ("can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze")
Link: https://lore.kernel.org/r/20210218110037.16591-2-qiangqing.zhang@nxp.com
Signed-off-by: Joakim Zhang 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: dev: prevent potential information leak in can_fill_info()

2021-02-03T22:16:17+00:00

[ Upstream commit b552766c872f5b0d90323b24e4c9e8fa67486dd5 ]

The "bec" struct isn't necessarily always initialized. For example, the
mcp251xfd_get_berr_counter() function doesn't initialize anything if the
interface is down.

Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters")
Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda
Signed-off-by: Dan Carpenter 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: dev: can_restart: fix use after free bug

2021-01-30T12:25:55+00:00

[ Upstream commit 03f16c5075b22c8902d2af739969e878b0879c94 ]

After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the netif_rx_ni() in:
      stats->rx_bytes += cf->len;

Reordering the lines solves the issue.

Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin