linux-stable.git/drivers/net/can, branch linux-3.2.y

can: esd_usb2: cancel urb on -EPIPE and -EPROTO

2018-03-03T15:50:45+00:00

commit 7a31ced3de06e9878e4f9c3abe8f87d9344d8144 upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Ben Hutchings

can: ems_usb: cancel urb on -EPIPE and -EPROTO

2018-03-03T15:50:44+00:00

commit bd352e1adfe0d02d3ea7c8e3fb19183dc317e679 upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Ben Hutchings

can: ti_hecc: Fix napi poll return value for repoll

2018-03-03T15:50:42+00:00

commit f6c23b174c3c96616514827407769cbcfc8005cf upstream.

After commit d75b1ade567f ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget.
So we need to return budget if there are still packets to receive.

Signed-off-by: Oliver Stäbler 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Ben Hutchings

can: esd_usb2: Fix can_dlc value for received RTR, frames

2018-01-01T20:50:59+00:00

commit 72d92e865d1560723e1957ee3f393688c49ca5bf upstream.

The dlc member of the struct rx_msg contains also the ESD_RTR flag to
mark received RTR frames. Without the fix the can_dlc value for received
RTR frames would always be set to 8 by get_can_dlc() instead of the
received value.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Stefan Mätje 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Ben Hutchings

can: ti_hecc: add missing prepare and unprepare of the clock

2017-03-16T02:18:44+00:00

commit befa60113ce7ea270cb51eada28443ca2756f480 upstream.

In order to make the driver work with the common clock framework, this
patch converts the clk_enable()/clk_disable() to
clk_prepare_enable()/clk_disable_unprepare().

Also add error checking for clk_prepare_enable().

Signed-off-by: Yegor Yefremov 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Ben Hutchings

can: dev: fix deadlock reported after bus-off

2016-11-20T01:01:42+00:00

commit 9abefcb1aaa58b9d5aa40a8bb12c87d02415e4c8 upstream.

A timer was used to restart after the bus-off state, leading to a
relatively large can_restart() executed in an interrupt context,
which in turn sets up pinctrl. When this happens during system boot,
there is a high probability of grabbing the pinctrl_list_mutex,
which is locked already by the probe() of other device, making the
kernel suspect a deadlock condition [1].

To resolve this issue, the restart_timer is replaced by a delayed
work.

[1] https://github.com/victronenergy/venus/issues/24

Signed-off-by: Sergei Miroshnichenko 
Signed-off-by: Marc Kleine-Budde 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

can: fix oops caused by wrong rtnl dellink usage

2016-08-22T21:37:15+00:00

commit 25e1ed6e64f52a692ba3191c4fde650aab3ecc07 upstream.

For 'real' hardware CAN devices the netlink interface is used to set CAN
specific communication parameters. Real CAN hardware can not be created nor
removed with the ip tool ...

This patch adds a private dellink function for the CAN device driver interface
that does just nothing.

It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl
newlink usage") but for dellink.

Reported-by: ajneu 
Signed-off-by: Oliver Hartkopp 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Ben Hutchings

can: at91_can: RX queue could get stuck at high bus load

2016-08-22T21:37:15+00:00

commit 43200a4480cbbe660309621817f54cbb93907108 upstream.

At high bus load it could happen that "at91_poll()" enters with all RX
message boxes filled up. If then at the end the "quota" is exceeded as
well, "rx_next" will not be reset to the first RX mailbox and hence the
interrupts remain disabled.

Signed-off-by: Wolfgang Grandegger 
Tested-by: Amr Bekhit 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Ben Hutchings

can: ems_usb: Fix possible tx overflow

2016-04-01T00:54:34+00:00

commit 90cfde46586d2286488d8ed636929e936c0c9ab2 upstream.

This patch fixes the problem that more CAN messages could be sent to the
interface as could be send on the CAN bus. This was more likely for slow baud
rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under
heavy TX load this produced another bulk transfer without checking the
free_slots variable and hence caused the overflow in the interface.

Signed-off-by: Gerhard Uttenthaler 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Ben Hutchings

can: sja1000: clear interrupts on start

2015-12-30T02:25:57+00:00

commit 7cecd9ab80f43972c056dc068338f7bcc407b71c upstream.

According to SJA1000 data sheet error-warning (EI) interrupt is not
cleared by setting the controller in to reset-mode.

Then if we have the following case:
- system is suspended (echo mem > /sys/power/state) and SJA1000 is left
  in operating state
- A bus error condition occurs which activates EI interrupt, system is
  still suspended which means EI interrupt will be not be handled nor
  cleared.

If the above two events occur, on resume there is no way to return the
SJA1000 to operating state, except to cycle power to it.

By simply reading the IR register on start we will clear any previous
conditions that could be present.

Signed-off-by: Mirza Krak 
Reported-by: Christian Magnusson 
Signed-off-by: Marc Kleine-Budde 
[bwh: Backported to 3.2: s/SJA1000_IR/REG_IR/]
Signed-off-by: Ben Hutchings