linux-stable.git/drivers/net/bonding, branch v5.3.14

bonding: fix using uninitialized mode_lock

2019-11-12T18:28:22+00:00

[ Upstream commit ad9bd8daf2f9938572b0604e1280fefa8f338581 ]

When a bonding interface is being created, it setups its mode and options.
At that moment, it uses mode_lock so mode_lock should be initialized
before that moment.

rtnl_newlink()
	rtnl_create_link()
		alloc_netdev_mqs()
			->setup() //bond_setup()
	->newlink //bond_newlink
		bond_changelink()
		register_netdevice()
			->ndo_init() //bond_init()

After commit 089bca2caed0 ("bonding: use dynamic lockdep key instead of
subclass"), mode_lock is initialized in bond_init().
So in the bond_changelink(), un-initialized mode_lock can be used.
mode_lock should be initialized in bond_setup().
This patch partially reverts commit 089bca2caed0 ("bonding: use dynamic
lockdep key instead of subclass")

Test command:
    ip link add bond0 type bond mode 802.3ad lacp_rate 0

Splat looks like:
[   60.615127] INFO: trying to register non-static key.
[   60.615900] the code is fine but needs lockdep annotation.
[   60.616697] turning off the locking correctness validator.
[   60.617490] CPU: 1 PID: 957 Comm: ip Not tainted 5.4.0-rc3+ #109
[   60.618350] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   60.619481] Call Trace:
[   60.619918]  dump_stack+0x7c/0xbb
[   60.620453]  register_lock_class+0x1215/0x14d0
[   60.621131]  ? alloc_netdev_mqs+0x7b3/0xcc0
[   60.621771]  ? is_bpf_text_address+0x86/0xf0
[   60.622416]  ? is_dynamic_key+0x230/0x230
[   60.623032]  ? unwind_get_return_address+0x5f/0xa0
[   60.623757]  ? create_prof_cpu_mask+0x20/0x20
[   60.624408]  ? arch_stack_walk+0x83/0xb0
[   60.625023]  __lock_acquire+0xd8/0x3de0
[   60.625616]  ? stack_trace_save+0x82/0xb0
[   60.626225]  ? stack_trace_consume_entry+0x160/0x160
[   60.626957]  ? deactivate_slab.isra.80+0x2c5/0x800
[   60.627668]  ? register_lock_class+0x14d0/0x14d0
[   60.628380]  ? alloc_netdev_mqs+0x7b3/0xcc0
[   60.629020]  ? save_stack+0x69/0x80
[   60.629574]  ? save_stack+0x19/0x80
[   60.630121]  ? __kasan_kmalloc.constprop.4+0xa0/0xd0
[   60.630859]  ? __kmalloc_node+0x16f/0x480
[   60.631472]  ? alloc_netdev_mqs+0x7b3/0xcc0
[   60.632121]  ? rtnl_create_link+0x2ed/0xad0
[   60.634388]  ? __rtnl_newlink+0xad4/0x11b0
[   60.635024]  lock_acquire+0x164/0x3b0
[   60.635608]  ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding]
[   60.636463]  _raw_spin_lock_bh+0x38/0x70
[   60.637084]  ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding]
[   60.637930]  bond_3ad_update_lacp_rate+0x91/0x200 [bonding]
[   60.638753]  ? bond_3ad_lacpdu_recv+0xb30/0xb30 [bonding]
[   60.639552]  ? bond_opt_get_val+0x180/0x180 [bonding]
[   60.640307]  ? ___slab_alloc+0x5aa/0x610
[   60.640925]  bond_option_lacp_rate_set+0x71/0x140 [bonding]
[   60.641751]  __bond_opt_set+0x1ff/0xbb0 [bonding]
[   60.643217]  ? kasan_unpoison_shadow+0x30/0x40
[   60.643924]  bond_changelink+0x9a4/0x1700 [bonding]
[   60.644653]  ? memset+0x1f/0x40
[   60.742941]  ? bond_slave_changelink+0x1a0/0x1a0 [bonding]
[   60.752694]  ? alloc_netdev_mqs+0x8ea/0xcc0
[   60.753330]  ? rtnl_create_link+0x2ed/0xad0
[   60.753964]  bond_newlink+0x1e/0x60 [bonding]
[   60.754612]  __rtnl_newlink+0xb9f/0x11b0
[ ... ]

Reported-by: syzbot+8da67f407bcba2c72e6e@syzkaller.appspotmail.com
Reported-by: syzbot+0d083911ab18b710da71@syzkaller.appspotmail.com
Fixes: 089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass")
Signed-off-by: Taehee Yoo 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bonding: use dynamic lockdep key instead of subclass

2019-11-12T18:27:53+00:00

[ Upstream commit 089bca2caed0d0dea7da235ce1fe245808f5ec02 ]

All bonding device has same lockdep key and subclass is initialized with
nest_level.
But actual nest_level value can be changed when a lower device is attached.
And at this moment, the subclass should be updated but it seems to be
unsafe.
So this patch makes bonding use dynamic lockdep key instead of the
subclass.

Test commands:
    ip link add bond0 type bond

    for i in {1..5}
    do
	    let A=$i-1
	    ip link add bond$i type bond
	    ip link set bond$i master bond$A
    done
    ip link set bond5 master bond0

Splat looks like:
[  307.992912] WARNING: possible recursive locking detected
[  307.993656] 5.4.0-rc3+ #96 Tainted: G        W
[  307.994367] --------------------------------------------
[  307.995092] ip/761 is trying to acquire lock:
[  307.995710] ffff8880513aac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[  307.997045]
	       but task is already holding lock:
[  307.997923] ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[  307.999215]
	       other info that might help us debug this:
[  308.000251]  Possible unsafe locking scenario:

[  308.001137]        CPU0
[  308.001533]        ----
[  308.001915]   lock(&(&bond->stats_lock)->rlock#2/2);
[  308.002609]   lock(&(&bond->stats_lock)->rlock#2/2);
[  308.003302]
		*** DEADLOCK ***

[  308.004310]  May be due to missing lock nesting notation

[  308.005319] 3 locks held by ip/761:
[  308.005830]  #0: ffffffff9fcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0
[  308.006894]  #1: ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[  308.008243]  #2: ffffffff9f9219c0 (rcu_read_lock){....}, at: bond_get_stats+0x9f/0x500 [bonding]
[  308.009422]
	       stack backtrace:
[  308.010124] CPU: 0 PID: 761 Comm: ip Tainted: G        W         5.4.0-rc3+ #96
[  308.011097] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  308.012179] Call Trace:
[  308.012601]  dump_stack+0x7c/0xbb
[  308.013089]  __lock_acquire+0x269d/0x3de0
[  308.013669]  ? register_lock_class+0x14d0/0x14d0
[  308.014318]  lock_acquire+0x164/0x3b0
[  308.014858]  ? bond_get_stats+0xb8/0x500 [bonding]
[  308.015520]  _raw_spin_lock_nested+0x2e/0x60
[  308.016129]  ? bond_get_stats+0xb8/0x500 [bonding]
[  308.017215]  bond_get_stats+0xb8/0x500 [bonding]
[  308.018454]  ? bond_arp_rcv+0xf10/0xf10 [bonding]
[  308.019710]  ? rcu_read_lock_held+0x90/0xa0
[  308.020605]  ? rcu_read_lock_sched_held+0xc0/0xc0
[  308.021286]  ? bond_get_stats+0x9f/0x500 [bonding]
[  308.021953]  dev_get_stats+0x1ec/0x270
[  308.022508]  bond_get_stats+0x1d1/0x500 [bonding]

Fixes: d3fff6c443fe ("net: add netdev_lockdep_set_classes() helper")
Signed-off-by: Taehee Yoo 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bonding: fix unexpected IFF_BONDING bit unset

2019-11-12T18:27:53+00:00

[ Upstream commit 65de65d9033750d2cf1b336c9d6e9da3a8b5cc6e ]

The IFF_BONDING means bonding master or bonding slave device.
->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets
IFF_BONDING flag.

bond0<--bond1

Both bond0 and bond1 are bonding device and these should keep having
IFF_BONDING flag until they are removed.
But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine
do not check whether the slave device is the bonding type or not.
This patch adds the interface type check routine before removing
IFF_BONDING flag.

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ip link set bond1 master bond0
    ip link set bond1 nomaster
    ip link del bond1 type bond
    ip link add bond1 type bond

Splat looks like:
[  226.665555] proc_dir_entry 'bonding/bond1' already registered
[  226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0
[  226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix
[  226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96
[  226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  226.670652] RIP: 0010:proc_register+0x2a9/0x3e0
[  226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e
0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00
[  226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282
[  226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2
[  226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c
[  226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019
[  226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008
[  226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e
[  226.680758] FS:  00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[  226.681886] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0
[  226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  226.685681] Call Trace:
[  226.687089]  proc_create_seq_private+0xb3/0xf0
[  226.687778]  bond_create_proc_entry+0x1b3/0x3f0 [bonding]
[  226.691458]  bond_netdev_event+0x433/0x970 [bonding]
[  226.692139]  ? __module_text_address+0x13/0x140
[  226.692779]  notifier_call_chain+0x90/0x160
[  226.693401]  register_netdevice+0x9b3/0xd80
[  226.694010]  ? alloc_netdev_mqs+0x854/0xc10
[  226.694629]  ? netdev_change_features+0xa0/0xa0
[  226.695278]  ? rtnl_create_link+0x2ed/0xad0
[  226.695849]  bond_newlink+0x2a/0x60 [bonding]
[  226.696422]  __rtnl_newlink+0xb9f/0x11b0
[  226.696968]  ? rtnl_link_unregister+0x220/0x220
[ ... ]

Fixes: 0b680e753724 ("[PATCH] bonding: Add priv_flag to avoid event mishandling")
Signed-off-by: Taehee Yoo 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bonding: fix state transition issue in link monitoring

2019-11-12T18:26:34+00:00

[ Upstream commit 1899bb325149e481de31a4f32b59ea6f24e176ea ]

Since de77ecd4ef02 ("bonding: improve link-status update in
mii-monitoring"), the bonding driver has utilized two separate variables
to indicate the next link state a particular slave should transition to.
Each is used to communicate to a different portion of the link state
change commit logic; one to the bond_miimon_commit function itself, and
another to the state transition logic.

	Unfortunately, the two variables can become unsynchronized,
resulting in incorrect link state transitions within bonding.  This can
cause slaves to become stuck in an incorrect link state until a
subsequent carrier state transition.

	The issue occurs when a special case in bond_slave_netdev_event
sets slave->link directly to BOND_LINK_FAIL.  On the next pass through
bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL
case will set the proposed next state (link_new_state) to BOND_LINK_UP,
but the new_link to BOND_LINK_DOWN.  The setting of the final link state
from new_link comes after that from link_new_state, and so the slave
will end up incorrectly in _DOWN state.

	Resolve this by combining the two variables into one.

Reported-by: Aleksei Zakharov 
Reported-by: Sha Zhang 
Cc: Mahesh Bandewar 
Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring")
Signed-off-by: Jay Vosburgh 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bonding: fix potential NULL deref in bond_update_slave_arr

2019-11-06T12:09:28+00:00

commit a7137534b597b7c303203e6bc3ed87e87a273bb8 upstream.

syzbot got a NULL dereference in bond_update_slave_arr() [1],
happening after a failure to allocate bond->slave_arr

A workqueue (bond_slave_arr_handler) is supposed to retry
the allocation later, but if the slave is removed before
the workqueue had a chance to complete, bond->slave_arr
can still be NULL.

[1]

Failed to build slave-array.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
Modules linked in:
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039
RSP: 0018:ffff88018fe33678 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000
RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20
RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0
FS:  00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 [] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923
 [] bond_release drivers/net/bonding/bond_main.c:2039 [inline]
 [] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562
 [] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328
 [] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495
 [] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088
 [] sock_ioctl+0x300/0x5d0 net/socket.c:1196
 [] vfs_ioctl fs/ioctl.c:47 [inline]
 [] file_ioctl fs/ioctl.c:501 [inline]
 [] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688
 [] SYSC_ioctl fs/ioctl.c:705 [inline]
 [] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696
 [] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305
 [] entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Cc: Mahesh Bandewar 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

bonding: Add vlan tx offload to hw_enc_features

2019-08-09T05:01:44+00:00

As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload")
said, we should always enable bonding's vlan tx offload, pass the
vlan packets to the slave devices with vlan tci, let them to handle
vlan implementation.

Now if encapsulation protocols like VXLAN is used, skb->encapsulation
may be set, then the packet is passed to vlan device which based on
bonding device. However in netif_skb_features(), the check of
hw_enc_features:

	 if (skb->encapsulation)
                 features &= dev->hw_enc_features;

clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
in same issue in commit 30d8177e8ac7 like this:

vlan_dev_hard_start_xmit
  -->dev_queue_xmit
    -->validate_xmit_skb
      -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
      -->validate_xmit_vlan
        -->__vlan_hwaccel_push_inside //skb->tci is cleared
...
 --> bond_start_xmit
   --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
     --> __skb_flow_dissect // nhoff point to IP header
        -->  case htons(ETH_P_8021Q)
             // skb_vlan_tag_present is false, so
             vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
             //vlan point to ip header wrongly

Fixes: b2a103e6d0af ("bonding: convert to ndo_fix_features")
Signed-off-by: YueHaibing 
Acked-by: Jay Vosburgh 
Signed-off-by: David S. Miller

bonding: Force slave speed check after link state recovery for 802.3ad

2019-07-22T19:09:32+00:00

The following scenario was encountered during testing of logical
partition mobility on pseries partitions with bonded ibmvnic
adapters in LACP mode.

1. Driver receives a signal that the device has been
   swapped, and it needs to reset to initialize the new
   device.

2. Driver reports loss of carrier and begins initialization.

3. Bonding driver receives NETDEV_CHANGE notifier and checks
   the slave's current speed and duplex settings. Because these
   are unknown at the time, the bond sets its link state to
   BOND_LINK_FAIL and handles the speed update, clearing
   AD_PORT_LACP_ENABLE.

4. Driver finishes recovery and reports that the carrier is on.

5. Bond receives a new notification and checks the speed again.
   The speeds are valid but miimon has not altered the link
   state yet.  AD_PORT_LACP_ENABLE remains off.

Because the slave's link state is still BOND_LINK_FAIL,
no further port checks are made when it recovers. Though
the slave devices are operational and have valid speed
and duplex settings, the bond will not send LACPDU's. The
simplest fix I can see is to force another speed check
in bond_miimon_commit. This way the bond will update
AD_PORT_LACP_ENABLE if needed when transitioning from
BOND_LINK_FAIL to BOND_LINK_UP.

CC: Jarod Wilson 
CC: Jay Vosburgh 
CC: Veaceslav Falico 
CC: Andy Gospodarek 
Signed-off-by: Thomas Falcon 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-07-09T02:48:57+00:00

Two cases of overlapping changes, nothing fancy.

Signed-off-by: David S. Miller

bonding: fix value exported by Netlink for peer_notif_delay

2019-07-09T02:28:44+00:00

IFLA_BOND_PEER_NOTIF_DELAY was set to the value of downdelay instead
of peer_notif_delay. After this change, the correct value is exported.

Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Vincent Bernat 
Signed-off-by: David S. Miller

bonding: add an option to specify a delay between peer notifications

2019-07-04T19:30:48+00:00

Currently, gratuitous ARP/ND packets are sent every `miimon'
milliseconds. This commit allows a user to specify a custom delay
through a new option, `peer_notif_delay'.

Like for `updelay' and `downdelay', this delay should be a multiple of
`miimon' to avoid managing an additional work queue. The configuration
logic is copied from `updelay' and `downdelay'. However, the default
value cannot be set using a module parameter: Netlink or sysfs should
be used to configure this feature.

When setting `miimon' to 100 and `peer_notif_delay' to 500, we can
observe the 500 ms delay is respected:

    20:30:19.354693 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
    20:30:19.874892 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
    20:30:20.394919 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
    20:30:20.914963 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28

In bond_mii_monitor(), I have tried to keep the lock logic readable.
The change is due to the fact we cannot rely on a notification to
lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is
only triggered once every N times, while we need to decrement the
counter each time.

iproute2 also needs to be updated to be able to specify this new
attribute through `ip link'.

Signed-off-by: Vincent Bernat 
Signed-off-by: David S. Miller