linux-stable.git/drivers/net/bonding, branch v5.0

bonding: fix PACKET_ORIGDEV regression

2019-02-21T21:20:08+00:00

This patch fixes a subtle PACKET_ORIGDEV regression which was a side
effect of fixes introduced by:

6a9e461f6fe4 bonding: pass link-local packets to bonding master also.

... to:

b89f04c61efe bonding: deliver link-local packets with skb->dev set to link that packets arrived on

While 6a9e461f6fe4 restored pre-b89f04c61efe presence of link-local
packets on bonding masters (which is required e.g. by linux bridges
participating in spanning tree or needed for lab-like setups created
with group_fwd_mask) it also caused the originating device
information to be lost due to cloning.

Maciej Żenczykowski proposed another solution that doesn't require
packet cloning and retains original device information - instead of
returning RX_HANDLER_PASS for all link-local packets it's now limited
only to packets from inactive slaves.

At the same time, packets passed to bonding masters retain correct
information about the originating device and PACKET_ORIGDEV can be used
to determine it.

This elegantly solves all issues so far:

- link-local packets that were removed from bonding masters
- LLDP daemons being forced to explicitly bind to slave interfaces
- PACKET_ORIGDEV having no effect on bond interfaces

Fixes: 6a9e461f6fe4 (bonding: pass link-local packets to bonding master also.)
Reported-by: Vincent Bernat 
Signed-off-by: Michal Soltys 
Signed-off-by: Maciej Żenczykowski 
Signed-off-by: David S. Miller

bonding: update nest level on unlink

2019-01-10T21:49:39+00:00

A network device stack with multiple layers of bonding devices can
trigger a false positive lockdep warning. Adding lockdep nest levels
fixes this. Update the level on both enslave and unlink, to avoid the
following series of events ..

    ip netns add test
    ip netns exec test bash
    ip link set dev lo addr 00:11:22:33:44:55
    ip link set dev lo down

    ip link add dev bond1 type bond
    ip link add dev bond2 type bond

    ip link set dev lo master bond1
    ip link set dev bond1 master bond2

    ip link set dev bond1 nomaster
    ip link set dev bond2 master bond1

.. from still generating a splat:

    [  193.652127] ======================================================
    [  193.658231] WARNING: possible circular locking dependency detected
    [  193.664350] 4.20.0 #8 Not tainted
    [  193.668310] ------------------------------------------------------
    [  193.674417] ip/15577 is trying to acquire lock:
    [  193.678897] 00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290
    [  193.687851]
    	       but task is already holding lock:
    [  193.693625] 00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290

    [..]

    [  193.851092]        lock_acquire+0xa7/0x190
    [  193.855138]        _raw_spin_lock_nested+0x2d/0x40
    [  193.859878]        bond_get_stats+0x58/0x290
    [  193.864093]        dev_get_stats+0x5a/0xc0
    [  193.868140]        bond_get_stats+0x105/0x290
    [  193.872444]        dev_get_stats+0x5a/0xc0
    [  193.876493]        rtnl_fill_stats+0x40/0x130
    [  193.880797]        rtnl_fill_ifinfo+0x6c5/0xdc0
    [  193.885271]        rtmsg_ifinfo_build_skb+0x86/0xe0
    [  193.890091]        rtnetlink_event+0x5b/0xa0
    [  193.894320]        raw_notifier_call_chain+0x43/0x60
    [  193.899225]        netdev_change_features+0x50/0xa0
    [  193.904044]        bond_compute_features.isra.46+0x1ab/0x270
    [  193.909640]        bond_enslave+0x141d/0x15b0
    [  193.913946]        do_set_master+0x89/0xa0
    [  193.918016]        do_setlink+0x37c/0xda0
    [  193.921980]        __rtnl_newlink+0x499/0x890
    [  193.926281]        rtnl_newlink+0x48/0x70
    [  193.930238]        rtnetlink_rcv_msg+0x171/0x4b0
    [  193.934801]        netlink_rcv_skb+0xd1/0x110
    [  193.939103]        rtnetlink_rcv+0x15/0x20
    [  193.943151]        netlink_unicast+0x3b5/0x520
    [  193.947544]        netlink_sendmsg+0x2fd/0x3f0
    [  193.951942]        sock_sendmsg+0x38/0x50
    [  193.955899]        ___sys_sendmsg+0x2ba/0x2d0
    [  193.960205]        __x64_sys_sendmsg+0xad/0x100
    [  193.964687]        do_syscall_64+0x5a/0x460
    [  193.968823]        entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 7e2556e40026 ("bonding: avoid lockdep confusion in bond_get_stats()")
Reported-by: syzbot 
Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller

bonding: fix indentation issues, remove extra spaces

2018-12-18T23:01:23+00:00

There are two statements that are indented too much by one space each,
fix these.

Signed-off-by: Colin Ian King 
Signed-off-by: David S. Miller

net: bonding: Issue NETDEV_PRE_CHANGEADDR

2018-12-14T02:41:39+00:00

Give interested parties an opportunity to veto an impending HW address
change.

Signed-off-by: Petr Machata 
Acked-by: Jiri Pirko 
Reviewed-by: Ido Schimmel 
Signed-off-by: David S. Miller

net: bonding: Give bond_set_dev_addr() a return value

2018-12-14T02:41:39+00:00

Before NETDEV_CHANGEADDR, bond driver should emit NETDEV_PRE_CHANGEADDR,
and allow consumers to veto the address change. To propagate further the
return code from NETDEV_PRE_CHANGEADDR, give the function that
implements address change a return value.

Signed-off-by: Petr Machata 
Acked-by: Jiri Pirko 
Reviewed-by: Ido Schimmel 
Signed-off-by: David S. Miller

net: dev: Add extack argument to dev_set_mac_address()

2018-12-14T02:41:38+00:00

A follow-up patch will add a notifier type NETDEV_PRE_CHANGEADDR, which
allows vetoing of MAC address changes. One prominent path to that
notification is through dev_set_mac_address(). Therefore give this
function an extack argument, so that it can be packed together with the
notification. Thus a textual reason for rejection (or a warning) can be
communicated back to the user.

Signed-off-by: Petr Machata 
Acked-by: Jiri Pirko 
Reviewed-by: Ido Schimmel 
Signed-off-by: David S. Miller

bonding: convert to DEFINE_SHOW_ATTRIBUTE

2018-12-10T20:05:20+00:00

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-12-10T05:43:31+00:00

Several conflicts, seemingly all over the place.

I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.

The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.

The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.

cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.

__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy.  Or at least I think it was :-)

Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.

The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.

Signed-off-by: David S. Miller

net: core: dev: Add extack argument to dev_open()

2018-12-06T21:26:06+00:00

In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_open().

Therefore extend dev_open() with and extra extack argument and update
all users. Most of the calls end up just encoding NULL, but bond and
team drivers have the extack readily available.

Signed-off-by: Petr Machata 
Acked-by: Jiri Pirko 
Reviewed-by: Ido Schimmel 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

bonding: fix 802.3ad state sent to partner when unbinding slave

2018-11-30T21:21:04+00:00

Previously when unbinding a slave the 802.3ad implementation only told
partner that the port is not suitable for aggregation by setting the port
aggregation state from aggregatable to individual. This is not enough. If the
physical layer still stays up and we only unbinded this port from the bond there
is nothing in the aggregation status alone to prevent the partner from sending
traffic towards us. To ensure that the partner doesn't consider this
port at all anymore we should also disable collecting and distributing to
signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to
ensure partner exits collecting + distributing state.

I have tested this behaviour againts Arista EOS switches with mlx5 cards
(physical link stays up even when interface is down) and simulated
the same situation virtually Linux <-> Linux with two network namespaces
running two veth device pairs. In both cases setting aggregation to
individual doesn't alone prevent traffic from being to sent towards this
port given that the link stays up in partners end. Partner still keeps
it's end in collecting + distributing state and continues until timeout is
reached. In most cases this means we are losing the traffic partner sends
towards our port while we wait for timeout. This is most visible with slow
periodic time (LACP rate slow).

Other open source implementations like Open VSwitch and libreswitch, and
vendor implementations like Arista EOS, seem to disable collecting +
distributing to when doing similar port disabling/detaching/removing change.
With this patch kernel implementation would behave the same way and ensure
partner doesn't consider our actor viable anymore.

Signed-off-by: Toni Peltonen 
Signed-off-by: Jay Vosburgh 
Acked-by: Jonathan Toppins 
Signed-off-by: David S. Miller