linux-stable.git/drivers/net/bonding, branch linux-6.3.y

bonding: do not assume skb mac_header is set

2023-07-11T17:39:31+00:00

[ Upstream commit 6a940abdef3162e5723f1495b8a49859d1708f79 ]

Drivers must not assume in their ndo_start_xmit() that
skbs have their mac_header set. skb->data is all what is needed.

bonding seems to be one of the last offender as caught by syzbot:

WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 skb_mac_offset include/linux/skbuff.h:2913 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 __bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470
Modules linked in:
CPU: 1 PID: 12155 Comm: syz-executor.3 Not tainted 6.1.30-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2907 [inline]
RIP: 0010:skb_mac_offset include/linux/skbuff.h:2913 [inline]
RIP: 0010:bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline]
RIP: 0010:bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline]
RIP: 0010:bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline]
RIP: 0010:__bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline]
RIP: 0010:bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470
Code: 8b 7c 24 30 e8 76 dd 1a 01 48 85 c0 74 0d 48 89 c3 e8 29 67 2e fe e9 15 ef ff ff e8 1f 67 2e fe e9 10 ef ff ff e8 15 67 2e fe <0f> 0b e9 45 f8 ff ff e8 09 67 2e fe e9 dc fa ff ff e8 ff 66 2e fe
RSP: 0018:ffffc90002fff6e0 EFLAGS: 00010283
RAX: ffffffff835874db RBX: 000000000000ffff RCX: 0000000000040000
RDX: ffffc90004dcf000 RSI: 00000000000000b5 RDI: 00000000000000b6
RBP: ffffc90002fff8b8 R08: ffffffff83586d16 R09: ffffffff83586584
R10: 0000000000000007 R11: ffff8881599fc780 R12: ffff88811b6a7b7e
R13: 1ffff110236d4f6f R14: ffff88811b6a7ac0 R15: 1ffff110236d4f76
FS: 00007f2e9eb47700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2e421000 CR3: 000000010e6d4000 CR4: 00000000003526e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:

[] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[] __dev_direct_xmit+0x4ef/0x850 net/core/dev.c:4380
[] dev_direct_xmit include/linux/netdevice.h:3043 [inline]
[] packet_direct_xmit+0x18b/0x300 net/packet/af_packet.c:284
[] packet_snd net/packet/af_packet.c:3112 [inline]
[] packet_sendmsg+0x4a22/0x64d0 net/packet/af_packet.c:3143
[] sock_sendmsg_nosec net/socket.c:716 [inline]
[] sock_sendmsg net/socket.c:736 [inline]
[] __sys_sendto+0x472/0x5f0 net/socket.c:2139
[] __do_sys_sendto net/socket.c:2151 [inline]
[] __se_sys_sendto net/socket.c:2147 [inline]
[] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147
[] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80
[] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 7b8fc0103bb5 ("bonding: add a vlan+srcmac tx hashing option")
Reported-by: syzbot 
Signed-off-by: Eric Dumazet 
Cc: Jarod Wilson 
Cc: Moshe Tal 
Cc: Jussi Maki 
Cc: Jay Vosburgh 
Cc: Andy Gospodarek 
Cc: Vladimir Oltean 
Link: https://lore.kernel.org/r/20230622152304.2137482-1-edumazet@google.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: fix stack overflow when LRO is disabled for virtual interfaces

2023-05-30T13:17:24+00:00

commit ae9b15fbe63447bc1d3bba3769f409d17ca6fdf6 upstream.

When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.

If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.

But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.

Reproducer:

ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done

ethtool -K team0 lro off

In order to fix it, the notifier_ctx member of bonding/team is introduced.

Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo
Reviewed-by: Eric Dumazet
Reviewed-by: Nikolay Aleksandrov
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski
Signed-off-by: Greg Kroah-Hartman

bonding: fix send_peer_notif overflow

2023-05-24T16:29:58+00:00

[ Upstream commit 9949e2efb54eb3001cb2f6512ff3166dddbfb75d ]

Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9
("bonding: add an option to specify a delay between peer notifications").
the bond->send_peer_notif will be num_peer_notif multiplied by
peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif
overflow easily. e.g.

  ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000

To fix the overflow, let's set the send_peer_notif to u32 and limit
peer_notif_delay to 300s.

Reported-by: Liang Li 
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053
Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bonding: Fix memory leak when changing bond type to Ethernet

2023-04-19T07:55:27+00:00

When a net device is put administratively up, its 'IFF_UP' flag is set
(if not set already) and a 'NETDEV_UP' notification is emitted, which
causes the 8021q driver to add VLAN ID 0 on the device. The reverse
happens when a net device is put administratively down.

When changing the type of a bond to Ethernet, its 'IFF_UP' flag is
incorrectly cleared, resulting in the kernel skipping the above process
and VLAN ID 0 being leaked [1].

Fix by restoring the flag when changing the type to Ethernet, in a
similar fashion to the restoration of the 'IFF_SLAVE' flag.

The issue can be reproduced using the script in [2], with example out
before and after the fix in [3].

[1]
unreferenced object 0xffff888103479900 (size 256):
  comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
  hex dump (first 32 bytes):
    00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [] kmalloc_trace+0x2a/0xe0
    [] vlan_vid_add+0x30c/0x790
    [] vlan_device_event+0x1491/0x21a0
    [] notifier_call_chain+0xbe/0x1f0
    [] call_netdevice_notifiers_info+0xba/0x150
    [] __dev_notify_flags+0x132/0x2e0
    [] dev_change_flags+0x11f/0x180
    [] do_setlink+0xb96/0x4060
    [] __rtnl_newlink+0xc0a/0x18a0
    [] rtnl_newlink+0x6c/0xa0
    [] rtnetlink_rcv_msg+0x43e/0xe00
    [] netlink_rcv_skb+0x170/0x440
    [] netlink_unicast+0x53f/0x810
    [] netlink_sendmsg+0x96b/0xe90
    [] ____sys_sendmsg+0x30f/0xa70
    [] ___sys_sendmsg+0x13a/0x1e0
unreferenced object 0xffff88810f6a83e0 (size 32):
  comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
  hex dump (first 32 bytes):
    a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff  ..G.......G.....
    81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc  ................
  backtrace:
    [] kmalloc_trace+0x2a/0xe0
    [] vlan_vid_add+0x409/0x790
    [] vlan_device_event+0x1491/0x21a0
    [] notifier_call_chain+0xbe/0x1f0
    [] call_netdevice_notifiers_info+0xba/0x150
    [] __dev_notify_flags+0x132/0x2e0
    [] dev_change_flags+0x11f/0x180
    [] do_setlink+0xb96/0x4060
    [] __rtnl_newlink+0xc0a/0x18a0
    [] rtnl_newlink+0x6c/0xa0
    [] rtnetlink_rcv_msg+0x43e/0xe00
    [] netlink_rcv_skb+0x170/0x440
    [] netlink_unicast+0x53f/0x810
    [] netlink_sendmsg+0x96b/0xe90
    [] ____sys_sendmsg+0x30f/0xa70
    [] ___sys_sendmsg+0x13a/0x1e0

[2]
ip link add name t-nlmon type nlmon
ip link add name t-dummy type dummy
ip link add name t-bond type bond mode active-backup

ip link set dev t-bond up
ip link set dev t-nlmon master t-bond
ip link set dev t-nlmon nomaster
ip link show dev t-bond
ip link set dev t-dummy master t-bond
ip link show dev t-bond

ip link del dev t-bond
ip link del dev t-dummy
ip link del dev t-nlmon

[3]
Before:

12: t-bond:  mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
    link/netlink
12: t-bond:  mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff

After:

12: t-bond:  mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
    link/netlink
12: t-bond:  mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff

Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type")
Fixes: 75c78500ddad ("bonding: remap muticast addresses without using dev_close() and dev_open()")
Fixes: 9ec7eb60dcbc ("bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change")
Reported-by: Mirsad Goran Todorovac 
Link: https://lore.kernel.org/netdev/78a8a03b-6070-3e6b-5042-f848dab16fb8@alu.unizg.hr/
Tested-by: Mirsad Goran Todorovac 
Signed-off-by: Ido Schimmel 
Acked-by: Jay Vosburgh 
Signed-off-by: David S. Miller

bonding: fix ns validation on backup slaves

2023-04-07T07:47:20+00:00

When arp_validate is set to 2, 3, or 6, validation is performed for
backup slaves as well. As stated in the bond documentation, validation
involves checking the broadcast ARP request sent out via the active
slave. This helps determine which slaves are more likely to function in
the event of an active slave failure.

However, when the target is an IPv6 address, the NS message sent from
the active interface is not checked on backup slaves. Additionally,
based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr
when checking the NS message.

Note that when checking the NS message, the destination address is a
multicast address. Therefore, we must convert the target address to
solicited multicast in the bond_get_targets_ip6() function.

Prior to the fix, the backup slaves had a mii status of "down", but
after the fix, all of the slaves' mii status was updated to "UP".

Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Reviewed-by: Jonathan Toppins 
Acked-by: Jay Vosburgh 
Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller

bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails

2023-03-17T07:56:41+00:00

syzbot reported a warning[1] where the bond device itself is a slave and
we try to enslave a non-ethernet device as the first slave which fails
but then in the error path when ether_setup() restores the bond device
it also clears all flags. In my previous fix[2] I restored the
IFF_MASTER flag, but I didn't consider the case that the bond device
itself might also be a slave with IFF_SLAVE set, so we need to restore
that flag as well. Use the bond_ether_setup helper which does the right
thing and restores the bond's flags properly.

Steps to reproduce using a nlmon dev:
 $ ip l add nlmon0 type nlmon
 $ ip l add bond1 type bond
 $ ip l add bond2 type bond
 $ ip l set bond1 master bond2
 $ ip l set dev nlmon0 master bond1
 $ ip -d l sh dev bond1
 22: bond1:  mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000
 (now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we
  try to delete it)

[1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef
[2] commit 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure")
[3] example warning:
 [   27.008664] bond1: (slave nlmon0): The slave device specified does not support setting the MAC address
 [   27.008692] bond1: (slave nlmon0): Error -95 calling set_mac_address
 [   32.464639] bond1 (unregistering): Released all slaves
 [   32.464685] ------------[ cut here ]------------
 [   32.464686] WARNING: CPU: 1 PID: 2004 at net/core/dev.c:10829 unregister_netdevice_many+0x72a/0x780
 [   32.464694] Modules linked in: br_netfilter bridge bonding virtio_net
 [   32.464699] CPU: 1 PID: 2004 Comm: ip Kdump: loaded Not tainted 5.18.0-rc3+ #47
 [   32.464703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014
 [   32.464704] RIP: 0010:unregister_netdevice_many+0x72a/0x780
 [   32.464707] Code: 99 fd ff ff ba 90 1a 00 00 48 c7 c6 f4 02 66 96 48 c7 c7 20 4d 35 96 c6 05 fa c7 2b 02 01 e8 be 6f 4a 00 0f 0b e9 73 fd ff ff <0f> 0b e9 5f fd ff ff 80 3d e3 c7 2b 02 00 0f 85 3b fd ff ff ba 59
 [   32.464710] RSP: 0018:ffffa006422d7820 EFLAGS: 00010206
 [   32.464712] RAX: ffff8f6e077140a0 RBX: ffffa006422d7888 RCX: 0000000000000000
 [   32.464714] RDX: ffff8f6e12edbe58 RSI: 0000000000000296 RDI: ffffffff96d4a520
 [   32.464716] RBP: ffff8f6e07714000 R08: ffffffff96d63600 R09: ffffa006422d7728
 [   32.464717] R10: 0000000000000ec0 R11: ffffffff9698c988 R12: ffff8f6e12edb140
 [   32.464719] R13: dead000000000122 R14: dead000000000100 R15: ffff8f6e12edb140
 [   32.464723] FS:  00007f297c2f1740(0000) GS:ffff8f6e5d900000(0000) knlGS:0000000000000000
 [   32.464725] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [   32.464726] CR2: 00007f297bf1c800 CR3: 00000000115e8000 CR4: 0000000000350ee0
 [   32.464730] Call Trace:
 [   32.464763]  
 [   32.464767]  rtnl_dellink+0x13e/0x380
 [   32.464776]  ? cred_has_capability.isra.0+0x68/0x100
 [   32.464780]  ? __rtnl_unlock+0x33/0x60
 [   32.464783]  ? bpf_lsm_capset+0x10/0x10
 [   32.464786]  ? security_capable+0x36/0x50
 [   32.464790]  rtnetlink_rcv_msg+0x14e/0x3b0
 [   32.464792]  ? _copy_to_iter+0xb1/0x790
 [   32.464796]  ? post_alloc_hook+0xa0/0x160
 [   32.464799]  ? rtnl_calcit.isra.0+0x110/0x110
 [   32.464802]  netlink_rcv_skb+0x50/0xf0
 [   32.464806]  netlink_unicast+0x216/0x340
 [   32.464809]  netlink_sendmsg+0x23f/0x480
 [   32.464812]  sock_sendmsg+0x5e/0x60
 [   32.464815]  ____sys_sendmsg+0x22c/0x270
 [   32.464818]  ? import_iovec+0x17/0x20
 [   32.464821]  ? sendmsg_copy_msghdr+0x59/0x90
 [   32.464823]  ? do_set_pte+0xa0/0xe0
 [   32.464828]  ___sys_sendmsg+0x81/0xc0
 [   32.464832]  ? mod_objcg_state+0xc6/0x300
 [   32.464835]  ? refill_obj_stock+0xa9/0x160
 [   32.464838]  ? memcg_slab_free_hook+0x1a5/0x1f0
 [   32.464842]  __sys_sendmsg+0x49/0x80
 [   32.464847]  do_syscall_64+0x3b/0x90
 [   32.464851]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [   32.464865] RIP: 0033:0x7f297bf2e5e7
 [   32.464868] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 [   32.464869] RSP: 002b:00007ffd96c824c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 [   32.464872] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297bf2e5e7
 [   32.464874] RDX: 0000000000000000 RSI: 00007ffd96c82540 RDI: 0000000000000003
 [   32.464875] RBP: 00000000640f19de R08: 0000000000000001 R09: 000000000000007c
 [   32.464876] R10: 00007f297bffabe0 R11: 0000000000000246 R12: 0000000000000001
 [   32.464877] R13: 00007ffd96c82d20 R14: 00007ffd96c82610 R15: 000055bfe38a7020
 [   32.464881]  
 [   32.464882] ---[ end trace 0000000000000000 ]---

Fixes: 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure")
Reported-by: syzbot+9dfc3f3348729cc82277@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef
Signed-off-by: Nikolay Aleksandrov 
Reviewed-by: Michal Kubiak 
Acked-by: Jonathan Toppins 
Acked-by: Jay Vosburgh 
Signed-off-by: David S. Miller

bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change

2023-03-17T07:56:41+00:00

Add bond_ether_setup helper which is used to fix ether_setup() calls in the
bonding driver. It takes care of both IFF_MASTER and IFF_SLAVE flags, the
former is always restored and the latter only if it was set.
If the bond enslaves non-ARPHRD_ETHER device (changes its type), then
releases it and enslaves ARPHRD_ETHER device (changes back) then we
use ether_setup() to restore the bond device type but it also resets its
flags and removes IFF_MASTER and IFF_SLAVE[1]. Use the bond_ether_setup
helper to restore both after such transition.

[1] reproduce (nlmon is non-ARPHRD_ETHER):
 $ ip l add nlmon0 type nlmon
 $ ip l add bond2 type bond mode active-backup
 $ ip l set nlmon0 master bond2
 $ ip l set nlmon0 nomaster
 $ ip l add bond1 type bond
 (we use bond1 as ARPHRD_ETHER device to restore bond2's mode)
 $ ip l set bond1 master bond2
 $ ip l sh dev bond2
 37: bond2:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether be:d7:c5:40:5b:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
 (notice bond2's IFF_MASTER is missing)

Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-02-09T20:25:40+00:00

net/devlink/leftover.c / net/core/devlink.c:
  565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
  f05bd8ebeb69 ("devlink: move code to a dedicated directory")
  687125b5799c ("devlink: split out core code")
https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/

Signed-off-by: Jakub Kicinski

bonding: fix error checking in bond_debug_reregister()

2023-02-04T03:22:20+00:00

Since commit ff9fb72bc077 ("debugfs: return error values,
not NULL") changed return value of debugfs_rename() in
error cases from %NULL to %ERR_PTR(-ERROR), we should
also check error values instead of NULL.

Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Qi Zheng 
Acked-by: Jay Vosburgh 
Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com
Signed-off-by: Jakub Kicinski

bonding: fill IPsec state validation failure reason

2023-01-27T00:28:48+00:00

Rely on extack to return failure reason.

Signed-off-by: Leon Romanovsky 
Signed-off-by: Jakub Kicinski