linux-stable.git/drivers/net/bonding, branch linux-3.13.y

bonding: set correct vlan id for alb xmit path

2014-04-14T13:47:20+00:00

[ Upstream commit fb00bc2e6cd2046282ba4b03f4fe682aee70b2f8 ]

The commit d3ab3ffd1d728d7ee77340e7e7e2c7cfe6a4013e
(bonding: use rlb_client_info->vlan_id instead of ->tag)
remove the rlb_client_info->tag, but occur some issues,
The vlan_get_tag() will return 0 for success and -EINVAL for
error, so the client_info->vlan_id always be set to 0 if the
vlan_get_tag return 0 for success, so the client_info would
never get a correct vlan id.

We should only set the vlan id to 0 when the vlan_get_tag return error.

Fixes: d3ab3ffd1d7 (bonding: use rlb_client_info->vlan_id instead of ->tag)

CC: Ding Tianhong 
CC: Jay Vosburgh 
CC: Andy Gospodarek 
Signed-off-by: Ding Tianhong 
Acked-by: Veaceslav Falico 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bonding: 802.3ad: make aggregator_identifier bond-private

2014-03-07T06:06:13+00:00

[ Upstream commit 163c8ff30dbe473abfbb24a7eac5536c87f3baa9 ]

aggregator_identifier is used to assign unique aggregator identifiers
to aggregators of a bond during device enslaving.

aggregator_identifier is currently a global variable that is zeroed in
bond_3ad_initialize().

This sequence will lead to duplicate aggregator identifiers for eth1 and eth3:

create bond0
change bond0 mode to 802.3ad
enslave eth0 to bond0 		//eth0 gets agg id 1
enslave eth1 to bond0 		//eth1 gets agg id 2
create bond1
change bond1 mode to 802.3ad
enslave eth2 to bond1		//aggregator_identifier is reset to 0
				//eth2 gets agg id 1
enslave eth3 to bond0 		//eth3 gets agg id 2

Fix this by making aggregator_identifier private to the bond.

Signed-off-by: Jiri Bohac 
Acked-by: Veaceslav Falico 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: core: explicitly select a txq before doing l2 forwarding

2014-01-10T18:23:08+00:00

Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The
will cause several issues:

- NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan
  instead of lower device which misses the necessary txq synchronization for
  lower device such as txq stopping or frozen required by dev watchdog or
  control path.
- dev_hard_start_xmit() was called with NULL txq which bypasses the net device
  watchdog.
- dev_hard_start_xmit() does not check txq everywhere which will lead a crash
  when tso is disabled for lower device.

Fix this by explicitly introducing a new param for .ndo_select_queue() for just
selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also
extended to accept this parameter and dev_queue_xmit_accel() was used to do l2
forwarding transmission.

With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need
to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep
a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of
dev_queue_xmit() to do the transmission.

In the future, it was also required for macvtap l2 forwarding support since it
provides a necessary synchronization method.

Cc: John Fastabend 
Cc: Neil Horman 
Cc: e1000-devel@lists.sourceforge.net
Signed-off-by: Jason Wang 
Acked-by: Neil Horman 
Acked-by: John Fastabend 
Signed-off-by: David S. Miller

bonding: protect port for bond_3ad_handle_link_change()

2013-12-18T21:52:26+00:00

The bond_3ad_handle_link_change is called with RTNL only,
and the function will modify the port's information with
no further locking, it will not mutex against bond state
machine and incoming LACPDU which do not hold RTNL, So I
add __get_state_machine_lock to protect the port.

But it is not a critical bug, it exist since day one, and till
now it has never been hit and reported, because changes to
speed is very rare, and will not occur critical problem.

The comments in the function is very old, cleanup it and
add a new pr_debug to debug the port message.

Signed-off-by: Ding Tianhong 
Signed-off-by: David S. Miller

bonding: protect port for bond_3ad_adapter_duplex_changed()

2013-12-18T21:52:26+00:00

Jay Vosburgh said that the bond_3ad_adapter_duplex_changed is
called with RTNL only, and the function will modify the port's
information with no further locking, it will not mutex against
bond state machine and incoming LACPDU which do not hold RTNL,
So I add __get_state_machine_lock to protect the port.

But it is not a critical bug, it exist since day one, and till
now it has never been hit and reported, because changes to
speed is very rare, and will not occur critical problem.

The comments in the function is very old, cleanup it.

Suggested-by: Jay Vosburgh 
Signed-off-by: Ding Tianhong 
Signed-off-by: David S. Miller

bonding: protect port for bond_3ad_adapter_speed_changed()

2013-12-18T21:52:25+00:00

Jay Vosburgh said that the bond_3ad_adapter_speed_changed is
called with RTNL only, and the function will modify the port's
information with no further locking, it will not mutex against
bond state machine and incoming LACPDU which do not hold RTNL,
So I add __get_state_machine_lock to protect the port.

But it is not a critical bug, it exist since day one, and till
now it has never been hit and reported, because changes to
speed is very rare, and will not occur critical problem.

The comment in the function is very old, cleanup it.

Suggested-by: Jay Vosburgh 
Signed-off-by: Ding Tianhong 
Signed-off-by: David S. Miller

bonding: fix packets_per_slave showing

2013-12-06T20:16:51+00:00

There's an issue when showing the value of packets_per_slave due to
using signed integer. The value may be < 0 and thus not put through
reciprocal_value() before showing. This patch makes it use unsigned
integer when showing it.

CC: Andy Gospodarek 
CC: Jay Vosburgh 
CC: Veaceslav Falico 
CC: David S. Miller 
Signed-off-by: Nikolay Aleksandrov 
Acked-by: Veaceslav Falico 
Signed-off-by: David S. Miller

bonding: add arp_ip_target checks when install the module

2013-12-06T01:58:14+00:00

When I install the bonding with the wrong arp_ip_target,
just like arp_ip_target=500.500.500.500, the arp_ip_target
was transfored to 245.245.245.244 and stored in the ip
target success, it is uncorrect, so I add checks to avoid
adding wrong address.

The in4_pton() will set wrong ip address to 0.0.0.0 and
return 0, also use the micro IS_IP_TARGET_UNUSABLE_ADDRESS
to simplify the code.

Signed-off-by: Ding Tianhong 
Signed-off-by: David S. Miller

bonding: disable arp and enable mii monitoring when bond change to no uses arp mode

2013-11-28T23:20:18+00:00

Because the ARP monitoring is not support for 802.3ad, but I still
could change the mode to 802.3ad from ab mode while ARP monitoring
is running, it is incorrect.

So add a check for 802.3ad in bonding_store_mode to fix the problem,
and make a new macro BOND_NO_USES_ARP() to simplify the code.

v2: according to the Dan Williams's suggestion, bond mode is the most
    important bond option, it should override any of the other sub-options.
    So when the mode is changed, the conficting values should be cleared
    or reset, otherwise the user has to duplicate more operations to modify
    the logic. I disable the arp and enable mii monitoring when the bond mode
    is changed to AB, TB and 8023AD if the arp interval is true.

v3: according to the Nik's suggestion, the default value of miimon should need
    a name, there is several place to use it, and the bond_store_arp_interval()
    could use micro BOND_NO_USES_ARP to make the code more simpify.

Suggested-by: Dan Williams 
Suggested-by: Nikolay Aleksandrov 
Signed-off-by: Ding Tianhong 
Reviewed-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

bonding: add ip checks when store ip target

2013-11-15T22:44:43+00:00

I met a Bug when I add ip target with the wrong ip address:

echo +500.500.500.500 > /sys/class/net/bond0/bonding/arp_ip_target

the wrong ip address will transfor to 245.245.245.244 and add
to the ip target success, it is uncorrect, so I add checks to avoid
adding wrong address.

The in4_pton() will set wrong ip address to 0.0.0.0, it will return by
the next check and will not add to ip target.

v2
According Veaceslav's opinion, simplify the code.

v3
According Veaceslav's opinion, add broadcast check and make a micro
definition to package it.

v4
Solve the problem of the format which David point out.

Suggested-by: Veaceslav Falico 
Suggested-by: David S. Miller 
Signed-off-by: Ding Tianhong 
Signed-off-by: David S. Miller