linux-stable.git/drivers/net/arm, branch linux-2.6.33.y

ARM: 5865/1: nuc900 ethernet driver needs mii

2010-01-05T20:53:07+00:00

nuc900 ethernet driver uses mii_xx_xx serials api, so mii module should be selected.

Signed-off-by: lijie 
Acked-by: Wan ZongShun 
Signed-off-by: Russell King

Merge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6

2009-12-12T23:22:22+00:00

* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6:
  IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four.
  IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files.
  IXP4xx: move Gemtek GTWX5715 platform macros to the platform code.
  IXP4xx: Remove unused Motorola PrPMC1100 platform macros.
  IXP4xx: move FSG platform macros to the platform code.
  IXP4xx: move DSM G600 platform macros to the platform code.
  IXP4xx: move NAS100D platform macros to the platform code.
  IXP4xx: move NSLU2 platform macros to the platform code.
  IXP4xx: move Coyote platform macros to the platform code.
  IXP4xx: move AVILA platform macros to the platform code.
  IXP4xx: move IXDP425 platform macros to the platform code.
  IXP4xx: Extend PCI MMIO indirect address space to 1 GB.
  IXP4xx: Fix compilation failure with CONFIG_IXP4XX_INDIRECT_PCI.
  IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity.
  IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*.
  IXP4xx: Ensure index is positive in irq_to_gpio() and npe_request().
  ARM: fix insl() and outsl() endianness on IXP4xx architecture.
  IXP4xx: Fix normally-disabled debugging text in drivers/net/arm/ixp4xx_eth.c.
  IXP4xx: change the timer base frequency to 66.666000 MHz.

IXP4xx: Fix normally-disabled debugging text in drivers/net/arm/ixp4xx_eth.c.

2009-12-05T15:58:38+00:00

Signed-off-by: Krzysztof Hałasa

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

2009-12-02T06:13:38+00:00

Conflicts:
	net/mac80211/ht.c

ep93xx-eth: check for zero MAC address on probe, not on device open

2009-11-30T07:50:32+00:00

If we happen to have registered the driver without passing
a MAC address, we will print a zero MAC address and register
the interface with this invalid address, this is confusin. This
patch moves the checking of a valid ethernet address and the
generation of a random one down from the open function to
the probe function.

Signed-off-by: Florian Fainelli 
Acked-by: Lennert Buytenhek 
Signed-off-by: David S. Miller

KS8695: fix ks8695_rx() unreasonable action.

2009-11-17T07:51:47+00:00

ks8695_rx() will call refill_buffers() for every incoming packet.
Its not necessary. We just need do it after finishing receiving thing.
And the 'RX dma engine' is in the same situation.
This blocks our user space application. The following patch may fix it.

Signed-off-by: zeal 
Signed-off-by: David S. Miller

KS8695: fix ks8695_rx_irq() bug.

2009-11-17T07:51:47+00:00

ks8695 rx irq is edge-level. Before arriving at irq handler, the
corresponding status bit has been clear(irq's ack).
So we should not check it after that.

Signed-off-by: zeal 
Signed-off-by: David S. Miller

ARM: fix bug of checking on signed return value using unsigned statement in w90p910 platform

2009-11-14T04:38:50+00:00

To fix the bug of checking on signed return value using unsigned statement.
Thanks Roel Kluin for digging out it.

Signed-off-by: Roel Kluin 
Signed-off-by: Wan ZongShun 
Signed-off-by: David S. Miller

NET:KS8695: add API for get rx interrupt bit

2009-11-02T07:55:07+00:00

1. Add API Add k8695_get_rx_enable_bit() for get Rx interrupt
enable/status bit.
2. add some comment or document about some functions and variables.
3.  update driver version to "1.02"
4. add napi_enable() and napi_disable() in open/close file method.

Signed-off-by: Figo.zhang 
Signed-off-by: David S. Miller

NET/KS8695: add support NAPI for Rx

2009-10-28T10:55:24+00:00

Add support NAPI Rx API for KS8695NET driver.

v2, change the Rx function to NAPI.

in :

Interrupt Enable Register (offset 0xE204)
Bit29 : WAN MAC Receive Interrupt Enable
Bit16 : LAN MAC Receive Interrupt Enable

Interrupt Status Register (Offset 0xF208)
Bit29: WAN MAC Receive Status
Bit16: LAN MAC Receive Status

see arch/arm/mach-ks8695/devices.c:
ks8695_wan_resources[] and ks8695_lan_resources[]
have IORESOURCE_IRQ , it have define the RX irq,
for wan, irq = 29; for lan ,irq = 16.
so we can do this read the interrupt status:

unsigned long mask_bit = 1 << ksp->rx_irq;
status = readl(KS8695_IRQ_VA + KS8695_INTST);

Signed-off-by: Figo.zhang 
Signed-off-by: David S. Miller