linux-stable.git/drivers/mux, branch linux-5.10.y

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva

mux: adgs1408: Add mod_devicetable.h and remove of_match_ptr

2020-06-29T16:39:44+00:00

Enables probing via the ACPI PRP0001 route but more is mostly about
removing examples of this that might get copied into new drivers.

Also fixes
  drivers/mux/adgs1408.c:112:34: warning: unused variable 'adgs1408_of_match
as has been reported recently.

Fixes: e9e40543ad5b ("spi: Add generic SPI multiplexer")
Reported-by: kbuild test robot 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Peter Rosin 
Link: https://lore.kernel.org/r/20200529145726.5708-1-peda@axentia.se
Signed-off-by: Greg Kroah-Hartman

drivers: Introduce device lookup variants by of_node

2019-07-30T11:07:41+00:00

Introduce wrappers for {bus/driver/class}_find_device() to
locate devices by its of_node.

Cc: Maarten Lankhorst 
Cc: Maxime Ripard 
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie 
Cc: Daniel Vetter 
Cc: devicetree@vger.kernel.org
Cc: Florian Fainelli 
Cc: Frank Rowand 
Cc: Heiko Stuebner 
Cc: Liam Girdwood 
Cc: linux-i2c@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-spi@vger.kernel.org
Cc: Mathieu Poirier 
Cc: Rob Herring 
Cc: Srinivas Kandagatla 
Cc: Takashi Iwai 
Cc: Alan Tull 
Cc: linux-fpga@vger.kernel.org
Cc: Peter Rosin 
Cc: Florian Fainelli 
Cc: Heiner Kallweit 
Cc: "David S. Miller" 
Cc: Andrew Lunn 
Cc: Liam Girdwood 
Cc: "Rafael J. Wysocki" 
Cc: Thor Thayer 
Cc: Jiri Slaby 
Cc: Andrew Lunn 
Cc: Peter Rosin 
Signed-off-by: Suzuki K Poulose 
Acked-by: Lee Jones 
Acked-by: Wolfram Sang  # I2C part
Acked-by: Moritz Fischer  # For FPGA part
Acked-by: Mark Brown 
Link: https://lore.kernel.org/r/20190723221838.12024-3-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman

mux: mmio: add generic regmap bitfield-based multiplexer

2019-06-21T13:59:53+00:00

Generic register bitfield-based multiplexer that controls the multiplexer
producer defined under a parent node.
The driver corresponding to parent node provides register read/write
capabilities.

Signed-off-by: Pankaj Bansal 
Signed-off-by: Peter Rosin 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2018-10-23T07:45:05+00:00

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.20 series:

  Core changes:

   - A patch series from Hans Verkuil to make it possible to
     enable/disable IRQs on a GPIO line at runtime and drive GPIO lines
     as output without having to put/get them from scratch.

     The irqchip callbacks have been improved so that they can use only
     the fastpatch callbacks to enable/disable irqs like any normal
     irqchip, especially the gpiod_lock_as_irq() has been improved to be
     callable in fastpath context.

     A bunch of rework had to be done to achieve this but it is a big
     win since I never liked to restrict this to slowpath. The only call
     requireing slowpath was try_module_get() and this is kept at the
     .request_resources() slowpath callback. In the GPIO CEC driver this
     is a big win sine a single line is used for both outgoing and
     incoming traffic, and this needs to use IRQs for incoming traffic
     while actively driving the line for outgoing traffic.

   - Janusz Krzysztofik improved the GPIO array API to pass a "cookie"
     (struct gpio_array) and a bitmap for setting or getting multiple
     GPIO lines at once.

     This improvement orginated in a specific need to speed up an OMAP1
     driver and has led to a much better API and real performance gains
     when the state of the array can be used to bypass a lot of checks
     and code when we want things to go really fast.

     The previous code would minimize the number of calls down to the
     driver callbacks assuming the CPU speed was orders of magnitude
     faster than the I/O latency, but this assumption was wrong on
     several platforms: what we needed to do was to profile and improve
     the speed on the hot path of the array functions and this change is
     now completed.

   - Clean out the painful and hard to grasp BNF experiments from the
     device tree bindings. Future approaches are looking into using JSON
     schema for this purpose. (Rob Herring is floating a patch series.)

  New drivers:

   - The RCAR driver now supports r8a774a1 (RZ/G2M).

   - Synopsys GPIO via CREGs driver.

  Major improvements:

   - Modernization of the EP93xx driver to use irqdomain and other
     contemporary concepts.

   - The ingenic driver has been merged into the Ingenic pin control
     driver and removed from the GPIO subsystem.

   - Debounce support in the ftgpio010 driver"

* tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits)
  gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip()
  gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip()
  gpio: Drop parent irq assignment during cascade setup
  mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap
  gpio: fix SNPS_CREG kconfig dependency warning
  gpiolib: Initialize gdev field before is used
  gpio: fix kernel-doc after devres.c file rename
  gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip
  gpio: syscon: Fix possible NULL ptr usage
  gpiolib: Show correct direction from the beginning
  pinctrl: msm: Use init_valid_mask exported function
  gpiolib: Add init_valid_mask exported function
  GPIO: add single-register GPIO via CREG driver
  dt-bindings: Document the Synopsys GPIO via CREG bindings
  gpio: mockup: use device properties instead of platform_data
  gpio: Slightly more helpful debugfs
  gpio: omap: Remove set but not used variable 'dev'
  gpio: omap: drop omap_gpio_list
  Accept partial 'gpio-line-names' property.
  gpio: omap: get rid of the conditional PM runtime calls
  ...

mux: adgs1408: use the correct MODULE_LICENSE

2018-10-12T15:36:39+00:00

The file is GPL v2 or later.

Acked-by: Mircea Caprioru 
Signed-off-by: Peter Rosin 
Signed-off-by: Greg Kroah-Hartman

gpiolib: Pass array info to get/set array functions

2018-09-13T09:16:54+00:00

In order to make use of array info obtained from gpiod_get_array() and
speed up processing of arrays matching single GPIO chip layout, that
information must be passed to get/set array functions.  Extend the
functions' API with that additional parameter and update all users.
Pass NULL if a user builds an array itself from single GPIOs.

Cc: Jonathan Corbet 
Cc: Miguel Ojeda Sandonis 
Cc: Geert Uytterhoeven 
Cc: Sebastien Bourdelin 
Cc: Lukas Wunner 
Cc: Peter Korsgaard 
Cc: Peter Rosin 
Cc: Andrew Lunn 
Cc: Florian Fainelli 
Cc: "David S. Miller" 
Cc: Rojhalat Ibrahim 
Cc: Dominik Brodowski 
Cc: Russell King 
Cc: Kishon Vijay Abraham I 
Cc: Tony Lindgren 
Cc: Lars-Peter Clausen 
Cc: Michael Hennerich 
Cc: Jonathan Cameron 
Cc: Hartmut Knaack 
Cc: Peter Meerwald-Stadler 
Cc: Greg Kroah-Hartman 
Cc: Jiri Slaby 
Cc: Yegor Yefremov 
Cc: Uwe Kleine-König 
Signed-off-by: Janusz Krzysztofik 
Acked-by: Ulf Hansson 
Signed-off-by: Linus Walleij

gpiolib: Pass bitmaps, not integer arrays, to get/set array

2018-09-13T09:15:30+00:00

Most users of get/set array functions iterate consecutive bits of data,
usually a single integer, while processing array of results obtained
from, or building an array of values to be passed to those functions.
Save time wasted on those iterations by changing the functions' API to
accept bitmaps.

All current users are updated as well.

More benefits from the change are expected as soon as planned support
for accepting/passing those bitmaps directly from/to respective GPIO
chip callbacks if applicable is implemented.

Cc: Jonathan Corbet 
Cc: Miguel Ojeda Sandonis 
Cc: Sebastien Bourdelin 
Cc: Lukas Wunner 
Cc: Peter Korsgaard 
Cc: Peter Rosin 
Cc: Andrew Lunn 
Cc: Florian Fainelli 
Cc: "David S. Miller" 
Cc: Rojhalat Ibrahim 
Cc: Dominik Brodowski 
Cc: Russell King 
Cc: Kishon Vijay Abraham I 
Cc: Tony Lindgren 
Cc: Lars-Peter Clausen 
Cc: Michael Hennerich 
Cc: Jonathan Cameron 
Cc: Hartmut Knaack 
Cc: Peter Meerwald-Stadler 
Cc: Greg Kroah-Hartman 
Cc: Jiri Slaby 
Cc: Yegor Yefremov 
Cc: Uwe Kleine-König 
Signed-off-by: Janusz Krzysztofik 
Acked-by: Ulf Hansson 
Reviewed-by: Geert Uytterhoeven 
Tested-by: Geert Uytterhoeven 
Signed-off-by: Linus Walleij

mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux

2018-08-02T08:23:02+00:00

This patch adds basic support for Analog Device ADGS1408/09 SPI mux
controller.

The device is probed and set to a disabled state. It uses the new mux
controller framework.

Signed-off-by: Mircea Caprioru 
Signed-off-by: Peter Rosin 
Signed-off-by: Greg Kroah-Hartman

mux: adg792a: switch to using .probe_new

2018-04-23T11:31:27+00:00

Use the new probe style for i2c drivers.

Signed-off-by: Peter Rosin 
Signed-off-by: Greg Kroah-Hartman