linux-stable.git/drivers/mtd, branch v6.1.78

mtd: parsers: ofpart: add workaround for #size-cells 0

2024-02-16T18:06:29+00:00

commit 84549c816dc317f012798e706e58669b3b013604 upstream.

Add a mechanism to handle the case in which partitions are present as
direct child of the nand controller node and #size-cells is set to <0>.

This could happen if the nand-controller node in the DTS is supposed to
have #size-cells set to 0, but for some historical reason/bug it was set
to 1 in the past, and the firmware (e.g. U-Boot) is adding the partition
as direct children of the nand-controller defaulting to #size-cells
being to 1.

This prevents a real boot failure on colibri-imx7 that happened during v6.1
development cycles.

Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/
Link: https://lore.kernel.org/all/20221202071900.1143950-1-francesco@dolcini.it/
Signed-off-by: Francesco Dolcini 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230124104444.330913-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman

mtd: Fix gluebi NULL pointer dereference caused by ftl notifier

2024-01-25T23:27:21+00:00

[ Upstream commit a43bdc376deab5fff1ceb93dca55bcab8dbdc1d6 ]

If both ftl.ko and gluebi.ko are loaded, the notifier of ftl
triggers NULL pointer dereference when trying to access
‘gluebi->desc’ in gluebi_read().

ubi_gluebi_init
  ubi_register_volume_notifier
    ubi_enumerate_volumes
      ubi_notify_all
        gluebi_notify    nb->notifier_call()
          gluebi_create
            mtd_device_register
              mtd_device_parse_register
                add_mtd_device
                  blktrans_notify_add   not->add()
                    ftl_add_mtd         tr->add_mtd()
                      scan_header
                        mtd_read
                          mtd_read_oob
                            mtd_read_oob_std
                              gluebi_read   mtd->read()
                                gluebi->desc - NULL

Detailed reproduction information available at the Link [1],

In the normal case, obtain gluebi->desc in the gluebi_get_device(),
and access gluebi->desc in the gluebi_read(). However,
gluebi_get_device() is not executed in advance in the
ftl_add_mtd() process, which leads to NULL pointer dereference.

The solution for the gluebi module is to run jffs2 on the UBI
volume without considering working with ftl or mtdblock [2].
Therefore, this problem can be avoided by preventing gluebi from
creating the mtdblock device after creating mtd partition of the
type MTD_UBIVOLUME.

Fixes: 2ba3d76a1e29 ("UBI: make gluebi a separate module")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217992 [1]
Link: https://lore.kernel.org/lkml/441107100.23734.1697904580252.JavaMail.zimbra@nod.at/ [2]
Signed-off-by: ZhaoLong Wang 
Reviewed-by: Zhihao Cheng 
Acked-by: Richard Weinberger 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20231220024619.2138625-1-wangzhaolong1@huawei.com
Signed-off-by: Sasha Levin

mtd: rawnand: Increment IFC_TIMEOUT_MSECS for nand controller response

2024-01-25T23:27:19+00:00

[ Upstream commit 923fb6238cb3ac529aa2bf13b3b1e53762186a8b ]

Under heavy load it is likely that the controller is done
with its own task but the thread unlocking the wait is not
scheduled in time. Increasing IFC_TIMEOUT_MSECS allows the
controller to respond within allowable timeslice of 1 sec.

fsl,ifc-nand 7e800000.nand: Controller is not responding

[<804b2047>] (nand_get_device) from [<804b5335>] (nand_write_oob+0x1b/0x4a)
[<804b5335>] (nand_write_oob) from [<804a3585>] (mtd_write+0x41/0x5c)
[<804a3585>] (mtd_write) from [<804c1d47>] (ubi_io_write+0x17f/0x22c)
[<804c1d47>] (ubi_io_write) from [<804c047b>] (ubi_eba_write_leb+0x5b/0x1d0)

Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller")
Reviewed-by: Miquel Raynal 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Ronald Monthero 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20231118083156.776887-1-debug.penguin32@gmail.com
Signed-off-by: Sasha Levin

mtd: cfi_cmdset_0001: Byte swap OTP info

2023-11-28T17:07:14+00:00

commit 565fe150624ee77dc63a735cc1b3bff5101f38a3 upstream.

Currently the offset into the device when looking for OTP
bits can go outside of the address of the MTD NOR devices,
and if that memory isn't readable, bad things happen
on the IXP4xx (added prints that illustrate the problem before
the crash):

cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x00000100
ixp4xx_copy_from copy from 0x00000100 to 0xc880dd78
cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x12000000
ixp4xx_copy_from copy from 0x12000000 to 0xc880dd78
8<--- cut here ---
Unable to handle kernel paging request at virtual address db000000
[db000000] *pgd=00000000
(...)

This happens in this case because the IXP4xx is big endian and
the 32- and 16-bit fields in the struct cfi_intelext_otpinfo are not
properly byteswapped. Compare to how the code in read_pri_intelext()
byteswaps the fields in struct cfi_pri_intelext.

Adding a small byte swapping loop for the OTP in read_pri_intelext()
and the crash goes away.

The problem went unnoticed for many years until I enabled
CONFIG_MTD_OTP on the IXP4xx as well, triggering the bug.

Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Pitre 
Signed-off-by: Linus Walleij 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20231020-mtd-otp-byteswap-v4-1-0d132c06aa9d@linaro.org
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: meson: check return value of devm_kasprintf()

2023-11-28T17:07:03+00:00

[ Upstream commit 5a985960a4dd041c21dbe9956958c1633d2da706 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.

Fixes: 1e4d3ba66888 ("mtd: rawnand: meson: fix the clock")
Signed-off-by: Yi Yang 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20231019065548.318443-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin

mtd: rawnand: intel: check return value of devm_kasprintf()

2023-11-28T17:07:03+00:00

[ Upstream commit 74ac5b5e2375f1e8ef797ac7770887e9969f2516 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.

Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Yi Yang 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20231019065537.318391-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin

mtd: rawnand: tegra: add missing check for platform_get_irq()

2023-11-28T17:07:03+00:00

[ Upstream commit 0a1166c27d4e53186e6bf9147ea6db9cd1d65847 ]

Add the missing check for platform_get_irq() and return error code
if it fails.

Fixes: d7d9f8ec77fe ("mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver")
Signed-off-by: Yi Yang 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230821084046.217025-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin

mtd: physmap-core: Restore map_rom fallback

2023-10-25T10:03:13+00:00

commit 6792b7fce610bcd1cf3e07af3607fe7e2c38c1d8 upstream.

When the exact mapping type driver was not available, the old
physmap_of_core driver fell back to mapping the region as ROM.
Unfortunately this feature was lost when the DT and pdata cases were
merged.  Revive this useful feature.

Fixes: 642b1e8dbed7bbbf ("mtd: maps: Merge physmap_of.c into physmap-core.c")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/550e8c8c1da4c4baeb3d71ff79b14a18d4194f9e.1693407371.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman

mtd: spinand: micron: correct bitmask for ecc status

2023-10-25T10:03:13+00:00

commit 9836a987860e33943945d4b257729a4f94eae576 upstream.

Valid bitmask is 0x70 in the status register.

Fixes: a508e8875e13 ("mtd: spinand: Add initial support for Micron MT29F2G01ABAGD")
Signed-off-by: Martin Kurbanov 
Reviewed-by: Frieder Schrempf 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230905145637.139068-1-mmkurbanov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: arasan: Ensure program page operations are successful

2023-10-25T10:03:13+00:00

commit 3a4a893dbb19e229db3b753f0462520b561dee98 upstream.

The NAND core complies with the ONFI specification, which itself
mentions that after any program or erase operation, a status check
should be performed to see whether the operation was finished *and*
successful.

The NAND core offers helpers to finish a page write (sending the
"PAGE PROG" command, waiting for the NAND chip to be ready again, and
checking the operation status). But in some cases, advanced controller
drivers might want to optimize this and craft their own page write
helper to leverage additional hardware capabilities, thus not always
using the core facilities.

Some drivers, like this one, do not use the core helper to finish a page
write because the final cycles are automatically managed by the
hardware. In this case, the additional care must be taken to manually
perform the final status check.

Let's read the NAND chip status at the end of the page write helper and
return -EIO upon error.

Cc: Michal Simek 
Cc: stable@vger.kernel.org
Fixes: 88ffef1b65cf ("mtd: rawnand: arasan: Support the hardware BCH ECC engine")
Signed-off-by: Miquel Raynal 
Acked-by: Michal Simek 
Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman