linux-stable.git/drivers/mtd, branch v5.4.58

mtd: properly check all write ioctls for permissions

2020-08-11T13:33:35+00:00

commit f7e6b19bc76471ba03725fe58e0c218a3d6266c3 upstream.

When doing a "write" ioctl call, properly check that we have permissions
to do so before copying anything from userspace or anything else so we
can "fail fast".  This includes also covering the MEMWRITE ioctl which
previously missed checking for this.

Cc: Miquel Raynal 
Cc: Richard Weinberger 
Cc: Vignesh Raghavendra 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
[rw: Fixed locking issue]
Signed-off-by: Richard Weinberger 
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: oxnas: Release all devices in the _remove() path

2020-07-22T07:33:07+00:00

commit 0a5f45e57e35d0840bedb816974ce2e63406cd8b upstream.

oxnans_nand_remove() should release all MTD devices and clean all NAND
devices, not only the first one registered.

Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support")
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-39-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: oxnas: Unregister all devices on error

2020-07-22T07:33:07+00:00

commit b60391eb17b2956ff2fc4c348e5a464da21ff9cb upstream.

On error, the oxnas probe path just frees the device which failed and
aborts the probe, leaving unreleased resources.

Fix this situation by calling mtd_device_unregister()/nand_cleanup()
on these.

Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support")
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-38-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: oxnas: Keep track of registered devices

2020-07-22T07:33:07+00:00

commit 383fc3f613e7eac9f2e3c13b6f9fb8c1f39cb9d5 upstream.

All initialized and registered devices should be listed somewhere so
that we can unregister/free them in the _remove() path.

This patch is not a fix per-se but is needed to apply three other
fixes coming right after, explaining the Fixes/Cc: stable tags.

Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support")
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-36-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: brcmnand: fix CS0 layout

2020-07-22T07:33:07+00:00

commit 3d3fb3c5be9ce07fa85d8f67fb3922e4613b955b upstream.

Only v3.3-v5.0 have a different CS0 layout.
Controllers before v3.3 use the same layout for every CS.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Álvaro Fernández Rojas 
Acked-by: Florian Fainelli 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: brcmnand: correctly verify erased pages

2020-07-22T07:33:07+00:00

commit dcb351c03f2fa6a599de1061b174167e03ee312b upstream.

The current code checks that the whole OOB area is erased.
This is a problem when JFFS2 cleanmarkers are added to the OOB, since it will
fail due to the usable OOB bytes not being 0xff.
Correct this by only checking that data and ECC bytes aren't 0xff.

Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips")
Signed-off-by: Álvaro Fernández Rojas 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20200512082451.771212-1-noltari@gmail.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: timings: Fix default tR_max and tCCS_min timings

2020-07-22T07:33:06+00:00

commit 4d8ec041d9c454029f6cd90622f6d81eb61e781c upstream.

tR and tCCS are currently wrongly expressed in femtoseconds, while we
expect these values to be expressed in picoseconds. Set right
hardcoded values.

Fixes: 6a943386ee36 mtd: rawnand: add default values for dynamic timings
Signed-off-by: Miquel Raynal 
Reviewed-by: Boris Brezillon 
Link: https://lore.kernel.org/linux-mtd/20200428094302.14624-3-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: marvell: Fix probe error path

2020-07-22T07:33:06+00:00

commit c525b7af96714f72e316c70781570a4a3e1c2856 upstream.

Ensure all chips are deregistered and cleaned in case of error during
the probe.

Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver")
Signed-off-by: Miquel Raynal 
Reviewed-by: Boris Brezillon 
Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-5-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: marvell: Use nand_cleanup() when the device is not yet registered

2020-07-22T07:33:06+00:00

commit 7a0c18fb5c71c6ac7d4662a145e4227dcd4a36a3 upstream.

Do not call nand_release() while the MTD device has not been
registered, use nand_cleanup() instead.

Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver")
Signed-off-by: Miquel Raynal 
Reviewed-by: Boris Brezillon 
Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-4-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: marvell: Fix the condition on a return code

2020-07-22T07:33:06+00:00

commit c27075772d1f1c8aaf276db9943b35adda8a8b65 upstream.

In a previous fix, I changed the condition on which the timeout of an
IRQ is reached from:

    if (!ret)

into:

    if (ret && !pending)

While having a non-zero return code is usual in the Linux kernel, here
ret comes from a wait_for_completion_timeout() which returns 0 when
the waiting period is too long.

Hence, the revised condition should be:

    if (!ret && !pending)

The faulty patch did not produce any error because of the !pending
condition so this change is finally purely cosmetic and does not
change the actual driver behavior.

Fixes: cafb56dd741e ("mtd: rawnand: marvell: prevent timeouts on a loaded machine")
Signed-off-by: Miquel Raynal 
Reviewed-by: Boris Brezillon 
Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman