linux-stable.git/drivers/mtd, branch v5.4.44 Linux kernel stable tree mtd: Fix mtd not registered due to nvmem name collision 2020-05-27T15:46:22+00:00 Ricardo Ribalda Delgado ribalda@kernel.org 2020-04-30T13:17:21+00:00 44fd02a3d7194001bc0676bf27511694072d06ee [ Upstream commit 7b01b7239d0dc9832e0d0d23605c1ff047422a2c ] When the nvmem framework is enabled, a nvmem device is created per mtd device/partition. It is not uncommon that a device can have multiple mtd devices with partitions that have the same name. Eg, when there DT overlay is allowed and the same device with mtd is attached twice. Under that circumstances, the mtd fails to register due to a name duplication on the nvmem framework. With this patch we use the mtdX name instead of the partition name, which is unique. [ 8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data' [ 8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13 [ 8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019 [ 8.948994] Call Trace: [ 8.948996] dump_stack+0x50/0x70 [ 8.948998] sysfs_warn_dup.cold+0x17/0x2d [ 8.949000] sysfs_do_create_link_sd.isra.0+0xc2/0xd0 [ 8.949002] bus_add_device+0x74/0x140 [ 8.949004] device_add+0x34b/0x850 [ 8.949006] nvmem_register.part.0+0x1bf/0x640 ... [ 8.948926] mtd mtd8: Failed to register NVMEM device Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API") Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7b01b7239d0dc9832e0d0d23605c1ff047422a2c ]

When the nvmem framework is enabled, a nvmem device is created per mtd
device/partition.

It is not uncommon that a device can have multiple mtd devices with
partitions that have the same name. Eg, when there DT overlay is allowed
and the same device with mtd is attached twice.

Under that circumstances, the mtd fails to register due to a name
duplication on the nvmem framework.

With this patch we use the mtdX name instead of the partition name,
which is unique.

[    8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data'
[    8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13
[    8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019
[    8.948994] Call Trace:
[    8.948996]  dump_stack+0x50/0x70
[    8.948998]  sysfs_warn_dup.cold+0x17/0x2d
[    8.949000]  sysfs_do_create_link_sd.isra.0+0xc2/0xd0
[    8.949002]  bus_add_device+0x74/0x140
[    8.949004]  device_add+0x34b/0x850
[    8.949006]  nvmem_register.part.0+0x1bf/0x640
...
[    8.948926] mtd mtd8: Failed to register NVMEM device

Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ubi: Fix seq_file usage in detailed_erase_block_info debugfs file 2020-05-27T15:46:19+00:00 Richard Weinberger richard@nod.at 2020-05-02T12:48:02+00:00 17c9595cca7177aa748665fbfa0e33b67ea5dc94 [ Upstream commit 0e7572cffe442290c347e779bf8bd4306bb0aa7c ] 3bfa7e141b0b ("fs/seq_file.c: seq_read(): add info message about buggy .next functions") showed that we don't use seq_file correctly. So make sure that our ->next function always updates the position. Fixes: 7bccd12d27b7 ("ubi: Add debugfs file for tracking PEB state") Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0e7572cffe442290c347e779bf8bd4306bb0aa7c ]

3bfa7e141b0b ("fs/seq_file.c: seq_read(): add info message about buggy .next functions")
showed that we don't use seq_file correctly.
So make sure that our ->next function always updates the position.

Fixes: 7bccd12d27b7 ("ubi: Add debugfs file for tracking PEB state")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mtd: spinand: Propagate ECC information to the MTD structure 2020-05-27T15:46:11+00:00 Miquel Raynal miquel.raynal@bootlin.com 2020-05-13T13:10:29+00:00 725b0bb0f94d384d4cea2baedcf44b84041ff03e [ Upstream commit 3507273d5a4d3c2e46f9d3f9ed9449805f5dff07 ] This is done by default in the raw NAND core (nand_base.c) but was missing in the SPI-NAND core. Without these two lines the ecc_strength and ecc_step_size values are not exported to the user through sysfs. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3507273d5a4d3c2e46f9d3f9ed9449805f5dff07 ]

This is done by default in the raw NAND core (nand_base.c) but was
missing in the SPI-NAND core. Without these two lines the ecc_strength
and ecc_step_size values are not exported to the user through sysfs.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mtd: phram: fix a double free issue in error path 2020-04-23T08:36:45+00:00 Wen Yang wenyang@linux.alibaba.com 2020-03-18T15:31:56+00:00 5d53bfdce008ed5c5429cdee26ad177580f252b7 commit 49c64df880570034308e4a9a49c4bc95cf8cdb33 upstream. The variable 'name' is released multiple times in the error path, which may cause double free issues. This problem is avoided by adding a goto label to release the memory uniformly. And this change also makes the code a bit more cleaner. Fixes: 4f678a58d335 ("mtd: fix memory leaks in phram_setup") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 49c64df880570034308e4a9a49c4bc95cf8cdb33 upstream.

The variable 'name' is released multiple times in the error path,
which may cause double free issues.
This problem is avoided by adding a goto label to release the memory
uniformly. And this change also makes the code a bit more cleaner.

Fixes: 4f678a58d335 ("mtd: fix memory leaks in phram_setup")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: lpddr: Fix a double free in probe() 2020-04-23T08:36:45+00:00 Dan Carpenter dan.carpenter@oracle.com 2020-02-28T09:25:54+00:00 4191ebe1fc71b6343c9d72b4de6e408c8d0b03bd commit 4da0ea71ea934af18db4c63396ba2af1a679ef02 upstream. This function is only called from lpddr_probe(). We free "lpddr" both here and in the caller, so it's a double free. The best place to free "lpddr" is in lpddr_probe() so let's delete this one. Fixes: 8dc004395d5e ("[MTD] LPDDR qinfo probing.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4da0ea71ea934af18db4c63396ba2af1a679ef02 upstream.

This function is only called from lpddr_probe().  We free "lpddr" both
here and in the caller, so it's a double free.  The best place to free
"lpddr" is in lpddr_probe() so let's delete this one.

Fixes: 8dc004395d5e ("[MTD] LPDDR qinfo probing.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB 2020-04-23T08:36:44+00:00 Frieder Schrempf frieder.schrempf@kontron.de 2020-02-18T10:05:25+00:00 318d5088fdfeb52955c0bdd1bf3ee688db204230 commit 621a7b780bd8b7054647d53d5071961f2c9e0873 upstream. When writing the bad block marker to the OOB area the access mode should be set to MTD_OPS_RAW as it is done for reading the marker. Currently this only works because req.mode is initialized to MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for req.mode != MTD_OPS_AUTO_OOB. Fix this by explicitly setting req.mode to MTD_OPS_RAW. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-3-frieder.schrempf@kontron.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 621a7b780bd8b7054647d53d5071961f2c9e0873 upstream.

When writing the bad block marker to the OOB area the access mode
should be set to MTD_OPS_RAW as it is done for reading the marker.
Currently this only works because req.mode is initialized to
MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for
req.mode != MTD_OPS_AUTO_OOB.

Fix this by explicitly setting req.mode to MTD_OPS_RAW.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-3-frieder.schrempf@kontron.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: rawnand: free the nand_device object 2020-04-23T08:36:44+00:00 Christophe Kerello christophe.kerello@st.com 2020-01-23T08:22:48+00:00 700bccb8e9a2ef43c4ce5f3aedd663973a4d7aea commit 009264605cdf1b12962c3a46f75818d05452e890 upstream. This patch releases the resources allocated in nanddev_init function. Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object") Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1579767768-32295-1-git-send-email-christophe.kerello@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 009264605cdf1b12962c3a46f75818d05452e890 upstream.

This patch releases the resources allocated in nanddev_init function.

Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object")
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1579767768-32295-1-git-send-email-christophe.kerello@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: spinand: Do not erase the block before writing a bad block marker 2020-04-17T08:50:14+00:00 Frieder Schrempf frieder.schrempf@kontron.de 2020-02-18T10:05:35+00:00 0297b7f9842ecfe0a55aed26a428d727db5372c4 commit b645ad39d56846618704e463b24bb994c9585c7f upstream. Currently when marking a block, we use spinand_erase_op() to erase the block before writing the marker to the OOB area. Doing so without waiting for the operation to finish can lead to the marking failing silently and no bad block marker being written to the flash. In fact we don't need to do an erase at all before writing the BBM. The ECC is disabled for raw accesses to the OOB data and we don't need to work around any issues with chips reporting ECC errors as it is known to be the case for raw NAND. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-4-frieder.schrempf@kontron.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b645ad39d56846618704e463b24bb994c9585c7f upstream.

Currently when marking a block, we use spinand_erase_op() to erase
the block before writing the marker to the OOB area. Doing so without
waiting for the operation to finish can lead to the marking failing
silently and no bad block marker being written to the flash.

In fact we don't need to do an erase at all before writing the BBM.
The ECC is disabled for raw accesses to the OOB data and we don't
need to work around any issues with chips reporting ECC errors as it
is known to be the case for raw NAND.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-4-frieder.schrempf@kontron.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers 2020-04-17T08:50:14+00:00 Frieder Schrempf frieder.schrempf@kontron.de 2020-02-18T10:05:14+00:00 4da7c98c30812be2fa011725af144d79127ddb32 commit 2148937501ee3d663e0010e519a553fea67ad103 upstream. For reading and writing the bad block markers, spinand->oobbuf is currently used as a buffer for the marker bytes. During the underlying read and write operations to actually get/set the content of the OOB area, the content of spinand->oobbuf is reused and changed by accessing it through spinand->oobbuf and/or spinand->databuf. This is a flaw in the original design of the SPI NAND core and at the latest from 13c15e07eedf ("mtd: spinand: Handle the case where PROGRAM LOAD does not reset the cache") on, it results in not having the bad block marker written at all, as the spinand->oobbuf is cleared to 0xff after setting the marker bytes to zero. To fix it, we now just store the two bytes for the marker on the stack and let the read/write operations copy it from/to the page buffer later. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-2-frieder.schrempf@kontron.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2148937501ee3d663e0010e519a553fea67ad103 upstream.

For reading and writing the bad block markers, spinand->oobbuf is
currently used as a buffer for the marker bytes. During the
underlying read and write operations to actually get/set the content
of the OOB area, the content of spinand->oobbuf is reused and changed
by accessing it through spinand->oobbuf and/or spinand->databuf.

This is a flaw in the original design of the SPI NAND core and at the
latest from 13c15e07eedf ("mtd: spinand: Handle the case where
PROGRAM LOAD does not reset the cache") on, it results in not having
the bad block marker written at all, as the spinand->oobbuf is
cleared to 0xff after setting the marker bytes to zero.

To fix it, we now just store the two bytes for the marker on the
stack and let the read/write operations copy it from/to the page
buffer later.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-2-frieder.schrempf@kontron.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: sharpslpart: Fix unsigned comparison to zero 2020-02-14T21:34:18+00:00 YueHaibing yuehaibing@huawei.com 2019-12-30T03:29:45+00:00 771fd0b2e8bf7332f18c471230cf4a3db023831c commit f33113b542219448fa02d77ca1c6f4265bd7f130 upstream. The unsigned variable log_num is being assigned a return value from the call to sharpsl_nand_get_logical_num that can return -EINVAL. Detected using Coccinelle: ./drivers/mtd/parsers/sharpslpart.c:207:6-13: WARNING: Unsigned expression compared with zero: log_num > 0 Fixes: 8a4580e4d298 ("mtd: sharpslpart: Add sharpslpart partition parser") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f33113b542219448fa02d77ca1c6f4265bd7f130 upstream.

The unsigned variable log_num is being assigned a return value
from the call to sharpsl_nand_get_logical_num that can return
-EINVAL.

Detected using Coccinelle:
./drivers/mtd/parsers/sharpslpart.c:207:6-13: WARNING: Unsigned expression compared with zero: log_num > 0

Fixes: 8a4580e4d298 ("mtd: sharpslpart: Add sharpslpart partition parser")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>