linux-stable.git/drivers/mtd, branch v5.4.261

mtd: rawnand: marvell: Ensure program page operations are successful

2023-11-08T10:23:34+00:00

[ Upstream commit 3e01d5254698ea3d18e09d96b974c762328352cd ]

The NAND core complies with the ONFI specification, which itself
mentions that after any program or erase operation, a status check
should be performed to see whether the operation was finished *and*
successful.

The NAND core offers helpers to finish a page write (sending the
"PAGE PROG" command, waiting for the NAND chip to be ready again, and
checking the operation status). But in some cases, advanced controller
drivers might want to optimize this and craft their own page write
helper to leverage additional hardware capabilities, thus not always
using the core facilities.

Some drivers, like this one, do not use the core helper to finish a page
write because the final cycles are automatically managed by the
hardware. In this case, the additional care must be taken to manually
perform the final status check.

Let's read the NAND chip status at the end of the page write helper and
return -EIO upon error.

Cc: stable@vger.kernel.org
Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver")
Reported-by: Aviram Dali 
Signed-off-by: Miquel Raynal 
Tested-by: Ravi Chandra Minnikanti 
Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin

mtd: physmap-core: Restore map_rom fallback

2023-10-25T09:53:24+00:00

commit 6792b7fce610bcd1cf3e07af3607fe7e2c38c1d8 upstream.

When the exact mapping type driver was not available, the old
physmap_of_core driver fell back to mapping the region as ROM.
Unfortunately this feature was lost when the DT and pdata cases were
merged.  Revive this useful feature.

Fixes: 642b1e8dbed7bbbf ("mtd: maps: Merge physmap_of.c into physmap-core.c")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/550e8c8c1da4c4baeb3d71ff79b14a18d4194f9e.1693407371.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman

mtd: spinand: micron: correct bitmask for ecc status

2023-10-25T09:53:24+00:00

commit 9836a987860e33943945d4b257729a4f94eae576 upstream.

Valid bitmask is 0x70 in the status register.

Fixes: a508e8875e13 ("mtd: spinand: Add initial support for Micron MT29F2G01ABAGD")
Signed-off-by: Martin Kurbanov 
Reviewed-by: Frieder Schrempf 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230905145637.139068-1-mmkurbanov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: qcom: Unmap the right resource upon probe failure

2023-10-25T09:53:24+00:00

commit 5279f4a9eed3ee7d222b76511ea7a22c89e7eefd upstream.

We currently provide the physical address of the DMA region
rather than the output of dma_map_resource() which is obviously wrong.

Fixes: 7330fc505af4 ("mtd: rawnand: qcom: stop using phys_to_dma()")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam 
Signed-off-by: Bibek Kumar Patro 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230913070702.12707-1-quic_bibekkum@quicinc.com
Signed-off-by: Greg Kroah-Hartman

ubi: Refuse attaching if mtd's erasesize is 0

2023-10-10T19:46:43+00:00

[ Upstream commit 017c73a34a661a861712f7cc1393a123e5b2208c ]

There exists mtd devices with zero erasesize, which will trigger a
divide-by-zero exception while attaching ubi device.
Fix it by refusing attaching if mtd's erasesize is 0.

Fixes: 801c135ce73d ("UBI: Unsorted Block Images")
Reported-by: Yu Hao 
Link: https://lore.kernel.org/lkml/977347543.226888.1682011999468.JavaMail.zimbra@nod.at/T/
Signed-off-by: Zhihao Cheng 
Reviewed-by: Miquel Raynal 
Signed-off-by: Richard Weinberger 
Signed-off-by: Sasha Levin

mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller

2023-09-23T09:00:06+00:00

commit 2ec2839a9062db8a592525a3fdabd42dcd9a3a9b upstream.

v7.2 controller has different ECC level field size and shift in the acc
control register than its predecessor and successor controller. It needs
to be set specifically.

Fixes: decba6d47869 ("mtd: brcmnand: Add v7.2 controller support")
Signed-off-by: William Zhang 
Reviewed-by: Florian Fainelli 
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-2-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: brcmnand: Fix potential false time out warning

2023-09-23T09:00:00+00:00

commit 9cc0a598b944816f2968baf2631757f22721b996 upstream.

If system is busy during the command status polling function, the driver
may not get the chance to poll the status register till the end of time
out and return the premature status.  Do a final check after time out
happens to ensure reading the correct status.

Fixes: 9d2ee0a60b8b ("mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program")
Signed-off-by: William Zhang 
Reviewed-by: Florian Fainelli 
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-3-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write

2023-09-23T09:00:00+00:00

commit 5d53244186c9ac58cb88d76a0958ca55b83a15cd upstream.

When the oob buffer length is not in multiple of words, the oob write
function does out-of-bounds read on the oob source buffer at the last
iteration. Fix that by always checking length limit on the oob buffer
read and fill with 0xff when reaching the end of the buffer to the oob
registers.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: William Zhang 
Reviewed-by: Florian Fainelli 
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-5-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: brcmnand: Fix crash during the panic_write

2023-09-23T09:00:00+00:00

commit e66dd317194daae0475fe9e5577c80aa97f16cb9 upstream.

When executing a NAND command within the panic write path, wait for any
pending command instead of calling BUG_ON to avoid crashing while
already crashing.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: William Zhang 
Reviewed-by: Florian Fainelli 
Reviewed-by: Kursad Oney 
Reviewed-by: Kamal Dasu 
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-4-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()

2023-09-23T08:59:53+00:00

[ Upstream commit a5a88125d00612586e941ae13e7fcf36ba8f18a7 ]

In fsmc_nand_resume(), the return value of clk_prepare_enable() should be
checked since it might fail.

Fixes: e25da1c07dfb ("mtd: fsmc_nand: Add clk_{un}prepare() support")
Signed-off-by: Yi Yang 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/20230817115839.10192-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin