<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/mtd, branch v5.4.166</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>mtd: rawnand: fsmc: Fix timing computation</title>
<updated>2021-12-14T13:49:03+00:00</updated>
<author>
<name>Herve Codina</name>
<email>herve.codina@bootlin.com</email>
</author>
<published>2021-11-19T15:03:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b78a27fa58cc7090ec4c4137e6afd0d477452844'/>
<id>b78a27fa58cc7090ec4c4137e6afd0d477452844</id>
<content type='text'>
commit 9472335eaa1452b51dc8e8edaa1a342997cb80c7 upstream.

Under certain circumstances, the timing settings calculated by
the FSMC NAND controller driver were inaccurate.
These settings led to incorrect data reads or fallback to
timing mode 0 depending on the NAND chip used.

The timing computation did not take into account the following
constraint given in SPEAr3xx reference manual:
  twait &gt;= tCEA - (tset * TCLK) + TOUTDEL + TINDEL

Enhance the timings calculation by taking into account this
additional constraint.

This change has no impact on slow timing modes such as mode 0.
Indeed, on mode 0, computed values are the same with and
without the patch.

NANDs which previously stayed in mode 0 because of fallback to
mode 0 can now work at higher speeds and NANDs which were not
working at all because of the corrupted data work at high
speeds without troubles.

Overall improvement on a Micron/MT29F1G08 (flash_speed tool):
                        mode0       mode3
eraseblock write speed  3220 KiB/s  4511 KiB/s
eraseblock read speed   4491 KiB/s  7529 KiB/s

Fixes: d9fb079571833 ("mtd: nand: fsmc: add support for SDR timings")
Signed-off-by: Herve Codina &lt;herve.codina@bootlin.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-5-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 9472335eaa1452b51dc8e8edaa1a342997cb80c7 upstream.

Under certain circumstances, the timing settings calculated by
the FSMC NAND controller driver were inaccurate.
These settings led to incorrect data reads or fallback to
timing mode 0 depending on the NAND chip used.

The timing computation did not take into account the following
constraint given in SPEAr3xx reference manual:
  twait &gt;= tCEA - (tset * TCLK) + TOUTDEL + TINDEL

Enhance the timings calculation by taking into account this
additional constraint.

This change has no impact on slow timing modes such as mode 0.
Indeed, on mode 0, computed values are the same with and
without the patch.

NANDs which previously stayed in mode 0 because of fallback to
mode 0 can now work at higher speeds and NANDs which were not
working at all because of the corrupted data work at high
speeds without troubles.

Overall improvement on a Micron/MT29F1G08 (flash_speed tool):
                        mode0       mode3
eraseblock write speed  3220 KiB/s  4511 KiB/s
eraseblock read speed   4491 KiB/s  7529 KiB/s

Fixes: d9fb079571833 ("mtd: nand: fsmc: add support for SDR timings")
Signed-off-by: Herve Codina &lt;herve.codina@bootlin.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-5-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: rawnand: fsmc: Take instruction delay into account</title>
<updated>2021-12-14T13:49:03+00:00</updated>
<author>
<name>Herve Codina</name>
<email>herve.codina@bootlin.com</email>
</author>
<published>2021-11-19T15:03:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7596d0deec7fe30abf44d5d0f36933fcfc30ed04'/>
<id>7596d0deec7fe30abf44d5d0f36933fcfc30ed04</id>
<content type='text'>
commit a4ca0c439f2d5ce9a3dc118d882f9f03449864c8 upstream.

The FSMC NAND controller should apply a delay after the
instruction has been issued on the bus.
The FSMC NAND controller driver did not handle this delay.

Add this waiting delay in the FSMC NAND controller driver.

Fixes: 4da712e70294 ("mtd: nand: fsmc: use -&gt;exec_op()")
Signed-off-by: Herve Codina &lt;herve.codina@bootlin.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a4ca0c439f2d5ce9a3dc118d882f9f03449864c8 upstream.

The FSMC NAND controller should apply a delay after the
instruction has been issued on the bus.
The FSMC NAND controller driver did not handle this delay.

Add this waiting delay in the FSMC NAND controller driver.

Fixes: 4da712e70294 ("mtd: nand: fsmc: use -&gt;exec_op()")
Signed-off-by: Herve Codina &lt;herve.codina@bootlin.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: core: don't remove debugfs directory if device is in use</title>
<updated>2021-11-17T08:48:45+00:00</updated>
<author>
<name>Zev Weiss</name>
<email>zev@bewilderbeest.net</email>
</author>
<published>2021-10-14T20:39:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=04317e74745a41888ee4e585fbcd251aa891ed0b'/>
<id>04317e74745a41888ee4e585fbcd251aa891ed0b</id>
<content type='text'>
[ Upstream commit c13de2386c78e890d4ae6f01a85eefd0b293fb08 ]

Previously, if del_mtd_device() failed with -EBUSY due to a non-zero
usecount, a subsequent call to attempt the deletion again would try to
remove a debugfs directory that had already been removed and panic.
With this change the second call can instead proceed safely.

Fixes: e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries")
Signed-off-by: Zev Weiss &lt;zev@bewilderbeest.net&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20211014203953.5424-1-zev@bewilderbeest.net
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit c13de2386c78e890d4ae6f01a85eefd0b293fb08 ]

Previously, if del_mtd_device() failed with -EBUSY due to a non-zero
usecount, a subsequent call to attempt the deletion again would try to
remove a debugfs directory that had already been removed and panic.
With this change the second call can instead proceed safely.

Fixes: e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries")
Signed-off-by: Zev Weiss &lt;zev@bewilderbeest.net&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20211014203953.5424-1-zev@bewilderbeest.net
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: spi-nor: hisi-sfc: Remove excessive clk_disable_unprepare()</title>
<updated>2021-11-17T08:48:45+00:00</updated>
<author>
<name>Evgeny Novikov</name>
<email>novikov@ispras.ru</email>
</author>
<published>2021-07-09T14:45:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=59929f9a573aba68b436bafb60870c50a3e32a4f'/>
<id>59929f9a573aba68b436bafb60870c50a3e32a4f</id>
<content type='text'>
[ Upstream commit 78e4d342187625585932bb437ec26e1060f7fc6f ]

hisi_spi_nor_probe() invokes clk_disable_unprepare() on all paths after
successful call of clk_prepare_enable(). Besides, the clock is enabled by
hispi_spi_nor_prep() and disabled by hispi_spi_nor_unprep(). So at remove
time it is not possible to have the clock enabled. The patch removes
excessive clk_disable_unprepare() from hisi_spi_nor_remove().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: e523f11141bd ("mtd: spi-nor: add hisilicon spi-nor flash controller driver")
Signed-off-by: Evgeny Novikov &lt;novikov@ispras.ru&gt;
Signed-off-by: Tudor Ambarus &lt;tudor.ambarus@microchip.com&gt;
Reviewed-by: Pratyush Yadav &lt;p.yadav@ti.com&gt;
Link: https://lore.kernel.org/r/20210709144529.31379-1-novikov@ispras.ru
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 78e4d342187625585932bb437ec26e1060f7fc6f ]

hisi_spi_nor_probe() invokes clk_disable_unprepare() on all paths after
successful call of clk_prepare_enable(). Besides, the clock is enabled by
hispi_spi_nor_prep() and disabled by hispi_spi_nor_unprep(). So at remove
time it is not possible to have the clock enabled. The patch removes
excessive clk_disable_unprepare() from hisi_spi_nor_remove().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: e523f11141bd ("mtd: spi-nor: add hisilicon spi-nor flash controller driver")
Signed-off-by: Evgeny Novikov &lt;novikov@ispras.ru&gt;
Signed-off-by: Tudor Ambarus &lt;tudor.ambarus@microchip.com&gt;
Reviewed-by: Pratyush Yadav &lt;p.yadav@ti.com&gt;
Link: https://lore.kernel.org/r/20210709144529.31379-1-novikov@ispras.ru
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'</title>
<updated>2021-09-22T10:26:45+00:00</updated>
<author>
<name>Christophe JAILLET</name>
<email>christophe.jaillet@wanadoo.fr</email>
</author>
<published>2021-08-21T07:58:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9b63c27d6b70c43dee4599aebf145c6a7743249e'/>
<id>9b63c27d6b70c43dee4599aebf145c6a7743249e</id>
<content type='text'>
[ Upstream commit 6b430c7595e4eb95fae8fb54adc3c3ce002e75ae ]

A successful 'init_rs_non_canonical()' call should be balanced by a
corresponding 'free_rs()' call in the error handling path of the probe, as
already done in the remove function.

Update the error handling path accordingly.

Fixes: 8c61b7a7f4d4 ("[MTD] [NAND] Use rslib for CAFÉ ECC")
Signed-off-by: Christophe JAILLET &lt;christophe.jaillet@wanadoo.fr&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/fd313d3fb787458bcc73189e349f481133a2cdc9.1629532640.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 6b430c7595e4eb95fae8fb54adc3c3ce002e75ae ]

A successful 'init_rs_non_canonical()' call should be balanced by a
corresponding 'free_rs()' call in the error handling path of the probe, as
already done in the remove function.

Update the error handling path accordingly.

Fixes: 8c61b7a7f4d4 ("[MTD] [NAND] Use rslib for CAFÉ ECC")
Signed-off-by: Christophe JAILLET &lt;christophe.jaillet@wanadoo.fr&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/fd313d3fb787458bcc73189e349f481133a2cdc9.1629532640.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cards</title>
<updated>2021-08-26T12:36:12+00:00</updated>
<author>
<name>Andreas Persson</name>
<email>andreasp56@outlook.com</email>
</author>
<published>2021-07-12T07:54:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7305d6d4078f8a74935457bc9fbea71c733261ff'/>
<id>7305d6d4078f8a74935457bc9fbea71c733261ff</id>
<content type='text'>
commit 2394e628738933aa014093d93093030f6232946d upstream.

Erasing an AMD linear flash card (AM29F016D) crashes after the first
sector has been erased. Likewise, writing to it crashes after two bytes
have been written. The reason is a missing check for a null pointer -
the cmdset_priv field is not set for this type of card.

Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register")
Signed-off-by: Andreas Persson &lt;andreasp56@outlook.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/DB6P189MB05830B3530B8087476C5CFE4C1159@DB6P189MB0583.EURP189.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2394e628738933aa014093d93093030f6232946d upstream.

Erasing an AMD linear flash card (AM29F016D) crashes after the first
sector has been erased. Likewise, writing to it crashes after two bytes
have been written. The reason is a missing check for a null pointer -
the cmdset_priv field is not set for this type of card.

Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register")
Signed-off-by: Andreas Persson &lt;andreasp56@outlook.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/DB6P189MB05830B3530B8087476C5CFE4C1159@DB6P189MB0583.EURP189.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: rawnand: marvell: add missing clk_disable_unprepare() on error in marvell_nfc_resume()</title>
<updated>2021-07-14T14:53:45+00:00</updated>
<author>
<name>Yang Yingliang</name>
<email>yangyingliang@huawei.com</email>
</author>
<published>2021-06-01T12:58:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=35a4e0aee8f3e2bfa1816e85dba2721714fcea39'/>
<id>35a4e0aee8f3e2bfa1816e85dba2721714fcea39</id>
<content type='text'>
[ Upstream commit ae94c49527aa9bd3b563349adc4b5617747ca6bd ]

Add clk_disable_unprepare() on error path in marvell_nfc_resume().

Fixes: bd9c3f9b3c00 ("mtd: rawnand: marvell: add suspend and resume hooks")
Reported-by: Hulk Robot &lt;hulkci@huawei.com&gt;
Signed-off-by: Yang Yingliang &lt;yangyingliang@huawei.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20210601125814.3260364-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit ae94c49527aa9bd3b563349adc4b5617747ca6bd ]

Add clk_disable_unprepare() on error path in marvell_nfc_resume().

Fixes: bd9c3f9b3c00 ("mtd: rawnand: marvell: add suspend and resume hooks")
Reported-by: Hulk Robot &lt;hulkci@huawei.com&gt;
Signed-off-by: Yang Yingliang &lt;yangyingliang@huawei.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20210601125814.3260364-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: partitions: redboot: seek fis-index-block in the right node</title>
<updated>2021-07-14T14:53:40+00:00</updated>
<author>
<name>Corentin Labbe</name>
<email>clabbe@baylibre.com</email>
</author>
<published>2021-05-20T11:48:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6490ed7c4684caf9851a0b98e0ab17a8d693dada'/>
<id>6490ed7c4684caf9851a0b98e0ab17a8d693dada</id>
<content type='text'>
[ Upstream commit 237960880960863fb41888763d635b384cffb104 ]

fis-index-block is seeked in the master node and not in the partitions node.
For following binding and current usage, the driver need to check the
partitions subnode.

Fixes: c0e118c8a1a3 ("mtd: partitions: Add OF support to RedBoot partitions")
Signed-off-by: Corentin Labbe &lt;clabbe@baylibre.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20210520114851.1274609-1-clabbe@baylibre.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 237960880960863fb41888763d635b384cffb104 ]

fis-index-block is seeked in the master node and not in the partitions node.
For following binding and current usage, the driver need to check the
partitions subnode.

Fixes: c0e118c8a1a3 ("mtd: partitions: Add OF support to RedBoot partitions")
Signed-off-by: Corentin Labbe &lt;clabbe@baylibre.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20210520114851.1274609-1-clabbe@baylibre.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init</title>
<updated>2021-05-14T07:44:20+00:00</updated>
<author>
<name>Lv Yunlong</name>
<email>lyl2019@mail.ustc.edu.cn</email>
</author>
<published>2021-04-03T06:09:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ef8e7bfea99aaeaf2b037cba19945205fe580850'/>
<id>ef8e7bfea99aaeaf2b037cba19945205fe580850</id>
<content type='text'>
[ Upstream commit 076de75de1e53160e9b099f75872c1f9adf41a0b ]

If the callee gpmi_alloc_dma_buffer() failed to alloc memory for
this-&gt;raw_buffer, gpmi_free_dma_buffer() will be called to free
this-&gt;auxiliary_virt. But this-&gt;auxiliary_virt is still a non-NULL
and valid ptr.

Then gpmi_alloc_dma_buffer() returns err and gpmi_free_dma_buffer()
is called again to free this-&gt;auxiliary_virt in err_out. This causes
a double free.

As gpmi_free_dma_buffer() has already called in gpmi_alloc_dma_buffer's
error path, so it should return err directly instead of releasing the dma
buffer again.

Fixes: 4d02423e9afe6 ("mtd: nand: gpmi: Fix gpmi_nand_init() error path")
Signed-off-by: Lv Yunlong &lt;lyl2019@mail.ustc.edu.cn&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20210403060905.5251-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 076de75de1e53160e9b099f75872c1f9adf41a0b ]

If the callee gpmi_alloc_dma_buffer() failed to alloc memory for
this-&gt;raw_buffer, gpmi_free_dma_buffer() will be called to free
this-&gt;auxiliary_virt. But this-&gt;auxiliary_virt is still a non-NULL
and valid ptr.

Then gpmi_alloc_dma_buffer() returns err and gpmi_free_dma_buffer()
is called again to free this-&gt;auxiliary_virt in err_out. This causes
a double free.

As gpmi_free_dma_buffer() has already called in gpmi_alloc_dma_buffer's
error path, so it should return err directly instead of releasing the dma
buffer again.

Fixes: 4d02423e9afe6 ("mtd: nand: gpmi: Fix gpmi_nand_init() error path")
Signed-off-by: Lv Yunlong &lt;lyl2019@mail.ustc.edu.cn&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20210403060905.5251-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: require write permissions for locking and badblock ioctls</title>
<updated>2021-05-14T07:44:19+00:00</updated>
<author>
<name>Michael Walle</name>
<email>michael@walle.cc</email>
</author>
<published>2021-03-03T15:57:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5880afefe0cb9b2d5e801816acd58bfe91a96981'/>
<id>5880afefe0cb9b2d5e801816acd58bfe91a96981</id>
<content type='text'>
[ Upstream commit 1e97743fd180981bef5f01402342bb54bf1c6366 ]

MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require
write permission. Depending on the hardware MEMLOCK might even be
write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK
is always write-once.

MEMSETBADBLOCK modifies the bad block table.

Fixes: f7e6b19bc764 ("mtd: properly check all write ioctls for permissions")
Signed-off-by: Michael Walle &lt;michael@walle.cc&gt;
Reviewed-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Acked-by: Rafał Miłecki &lt;rafal@milecki.pl&gt;
Acked-by: Richard Weinberger &lt;richard@nod.at&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20210303155735.25887-1-michael@walle.cc
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 1e97743fd180981bef5f01402342bb54bf1c6366 ]

MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require
write permission. Depending on the hardware MEMLOCK might even be
write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK
is always write-once.

MEMSETBADBLOCK modifies the bad block table.

Fixes: f7e6b19bc764 ("mtd: properly check all write ioctls for permissions")
Signed-off-by: Michael Walle &lt;michael@walle.cc&gt;
Reviewed-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Acked-by: Rafał Miłecki &lt;rafal@milecki.pl&gt;
Acked-by: Richard Weinberger &lt;richard@nod.at&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20210303155735.25887-1-michael@walle.cc
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
