linux-stable.git/drivers/mtd, branch v5.16.2 Linux kernel stable tree mtd: dataflash: Add device-tree SPI IDs 2021-12-03T13:33:59+00:00 Jon Hunter jonathanh@nvidia.com 2021-11-30T11:24:43+00:00 27a030e8729255b2068f35c1cd609b532b263311 Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") added a test to check that every SPI driver has a spi_device_id for each DT compatiable string defined by the driver and warns if the spi_device_id is missing. The spi_device_ids are missing for the dataflash driver and the following warnings are now seen. WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,at45 WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,dataflash Fix this by adding the necessary spi_device_ids. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211130112443.107730-1-jonathanh@nvidia.com 
Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT
compatible") added a test to check that every SPI driver has a
spi_device_id for each DT compatiable string defined by the driver
and warns if the spi_device_id is missing. The spi_device_ids are
missing for the dataflash driver and the following warnings are now
seen.

 WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,at45
 WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,dataflash

Fix this by adding the necessary spi_device_ids.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211130112443.107730-1-jonathanh@nvidia.com
mtd: rawnand: fsmc: Fix timing computation 2021-12-03T13:33:45+00:00 Herve Codina herve.codina@bootlin.com 2021-11-19T15:03:16+00:00 9472335eaa1452b51dc8e8edaa1a342997cb80c7 Under certain circumstances, the timing settings calculated by the FSMC NAND controller driver were inaccurate. These settings led to incorrect data reads or fallback to timing mode 0 depending on the NAND chip used. The timing computation did not take into account the following constraint given in SPEAr3xx reference manual: twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL Enhance the timings calculation by taking into account this additional constraint. This change has no impact on slow timing modes such as mode 0. Indeed, on mode 0, computed values are the same with and without the patch. NANDs which previously stayed in mode 0 because of fallback to mode 0 can now work at higher speeds and NANDs which were not working at all because of the corrupted data work at high speeds without troubles. Overall improvement on a Micron/MT29F1G08 (flash_speed tool): mode0 mode3 eraseblock write speed 3220 KiB/s 4511 KiB/s eraseblock read speed 4491 KiB/s 7529 KiB/s Fixes: d9fb079571833 ("mtd: nand: fsmc: add support for SDR timings") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-5-herve.codina@bootlin.com 
Under certain circumstances, the timing settings calculated by
the FSMC NAND controller driver were inaccurate.
These settings led to incorrect data reads or fallback to
timing mode 0 depending on the NAND chip used.

The timing computation did not take into account the following
constraint given in SPEAr3xx reference manual:
  twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL

Enhance the timings calculation by taking into account this
additional constraint.

This change has no impact on slow timing modes such as mode 0.
Indeed, on mode 0, computed values are the same with and
without the patch.

NANDs which previously stayed in mode 0 because of fallback to
mode 0 can now work at higher speeds and NANDs which were not
working at all because of the corrupted data work at high
speeds without troubles.

Overall improvement on a Micron/MT29F1G08 (flash_speed tool):
                        mode0       mode3
eraseblock write speed  3220 KiB/s  4511 KiB/s
eraseblock read speed   4491 KiB/s  7529 KiB/s

Fixes: d9fb079571833 ("mtd: nand: fsmc: add support for SDR timings")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-5-herve.codina@bootlin.com
mtd: rawnand: fsmc: Take instruction delay into account 2021-12-03T13:33:45+00:00 Herve Codina herve.codina@bootlin.com 2021-11-19T15:03:15+00:00 a4ca0c439f2d5ce9a3dc118d882f9f03449864c8 The FSMC NAND controller should apply a delay after the instruction has been issued on the bus. The FSMC NAND controller driver did not handle this delay. Add this waiting delay in the FSMC NAND controller driver. Fixes: 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com 
The FSMC NAND controller should apply a delay after the
instruction has been issued on the bus.
The FSMC NAND controller driver did not handle this delay.

Add this waiting delay in the FSMC NAND controller driver.

Fixes: 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com
mtd: rawnand: Fix nand_choose_best_timings() on unsupported interface 2021-12-03T13:33:44+00:00 Herve Codina herve.codina@bootlin.com 2021-11-19T15:03:14+00:00 36a65982a98c4bc72fdcfef2c4aaf90193746631 When the NV-DDR interface is not supported by the NAND chip, the value of onfi->nvddr_timing_modes is 0. In this case, the best_mode variable value in nand_choose_best_nvddr_timings() is -1. The last for-loop is skipped and the function returns an uninitialized value. If this returned value is 0, the nand_choose_best_sdr_timings() is not executed and no 'best timing' are set. This leads the host controller and the NAND chip working at default mode 0 timing even if a better timing can be used. Fix this uninitialized returned value. nand_choose_best_sdr_timings() is pretty similar to nand_choose_best_nvddr_timings(). Even if onfi->sdr_timing_modes should never be seen as 0, nand_choose_best_sdr_timings() returned value is fixed. Fixes: a9ecc8c814e9 ("mtd: rawnand: Choose the best timings, NV-DDR included") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-3-herve.codina@bootlin.com 
When the NV-DDR interface is not supported by the NAND chip,
the value of onfi->nvddr_timing_modes is 0. In this case,
the best_mode variable value in nand_choose_best_nvddr_timings()
is -1. The last for-loop is skipped and the function returns an
uninitialized value.
If this returned value is 0, the nand_choose_best_sdr_timings()
is not executed and no 'best timing' are set. This leads the host
controller and the NAND chip working at default mode 0 timing
even if a better timing can be used.

Fix this uninitialized returned value.

nand_choose_best_sdr_timings() is pretty similar to
nand_choose_best_nvddr_timings(). Even if onfi->sdr_timing_modes
should never be seen as 0, nand_choose_best_sdr_timings() returned
value is fixed.

Fixes: a9ecc8c814e9 ("mtd: rawnand: Choose the best timings, NV-DDR included")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-3-herve.codina@bootlin.com
mtd: rawnand: Fix nand_erase_op delay 2021-12-03T13:33:44+00:00 Herve Codina herve.codina@bootlin.com 2021-11-19T15:03:13+00:00 16d8b628a4152e8e8b01b6a1d82e30208ee2dd30 NAND_OP_CMD() expects a delay parameter in nanoseconds. The delay value is wrongly given in milliseconds. Fix the conversion macro used in order to set this delay in nanoseconds. Fixes: d7a773e8812b ("mtd: rawnand: Access SDR and NV-DDR timings through a common macro") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-2-herve.codina@bootlin.com 
NAND_OP_CMD() expects a delay parameter in nanoseconds.
The delay value is wrongly given in milliseconds.

Fix the conversion macro used in order to set this
delay in nanoseconds.

Fixes: d7a773e8812b ("mtd: rawnand: Access SDR and NV-DDR timings through a common macro")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-2-herve.codina@bootlin.com
mtd: rawnand: denali: Add the dependency on HAS_IOMEM 2021-12-03T13:33:43+00:00 Cai Huoqing caihuoqing@baidu.com 2021-11-09T13:47:58+00:00 2e69e18aec4c1d308b2da461cb6d21500fa441c7 The helper function devm_platform_ioremap_resource_xxx() needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM. Fixes: 5f14a8ca1b49 ("mtd: rawnand: denali: Make use of the helper function devm_platform_ioremap_resource_byname()") Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211109134758.417-1-caihuoqing@baidu.com 
The helper function devm_platform_ioremap_resource_xxx()
needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM.

Fixes: 5f14a8ca1b49 ("mtd: rawnand: denali: Make use of the helper function devm_platform_ioremap_resource_byname()")

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211109134758.417-1-caihuoqing@baidu.com
Merge tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block 2021-11-09T19:24:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-09T19:24:08+00:00 cb690f5238d71f543f4ce874aa59237cf53a877c Pull more block driver updates from Jens Axboe: - Last series adding error handling support for add_disk() in drivers. After this one, and once the SCSI side has been merged, we can finally annotate add_disk() as must_check. (Luis) - bcache fixes (Coly) - zram fixes (Ming) - ataflop locking fix (Tetsuo) - nbd fixes (Ye, Yu) - MD merge via Song - Cleanup (Yang) - sysfs fix (Guoqing) - Misc fixes (Geert, Wu, luo) * tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits) bcache: Revert "bcache: use bvec_virt" ataflop: Add missing semicolon to return statement floppy: address add_disk() error handling on probe ataflop: address add_disk() error handling on probe block: update __register_blkdev() probe documentation ataflop: remove ataflop_probe_lock mutex mtd/ubi/block: add error handling support for add_disk() block/sunvdc: add error handling support for add_disk() z2ram: add error handling support for add_disk() nvdimm/pmem: use add_disk() error handling nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned nvdimm/blk: add error handling support for add_disk() nvdimm/blk: avoid calling del_gendisk() on early failures nvdimm/btt: add error handling support for add_disk() nvdimm/btt: use goto error labels on btt_blk_init() loop: Remove duplicate assignments drbd: Fix double free problem in drbd_create_device nvdimm/btt: do not call del_gendisk() if not needed bcache: fix use-after-free problem in bcache_device_free() zram: replace fsync_bdev with sync_blockdev ... 
Pull more block driver updates from Jens Axboe:

 - Last series adding error handling support for add_disk() in drivers.
   After this one, and once the SCSI side has been merged, we can
   finally annotate add_disk() as must_check. (Luis)

 - bcache fixes (Coly)

 - zram fixes (Ming)

 - ataflop locking fix (Tetsuo)

 - nbd fixes (Ye, Yu)

 - MD merge via Song
      - Cleanup (Yang)
      - sysfs fix (Guoqing)

 - Misc fixes (Geert, Wu, luo)

* tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits)
  bcache: Revert "bcache: use bvec_virt"
  ataflop: Add missing semicolon to return statement
  floppy: address add_disk() error handling on probe
  ataflop: address add_disk() error handling on probe
  block: update __register_blkdev() probe documentation
  ataflop: remove ataflop_probe_lock mutex
  mtd/ubi/block: add error handling support for add_disk()
  block/sunvdc: add error handling support for add_disk()
  z2ram: add error handling support for add_disk()
  nvdimm/pmem: use add_disk() error handling
  nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned
  nvdimm/blk: add error handling support for add_disk()
  nvdimm/blk: avoid calling del_gendisk() on early failures
  nvdimm/btt: add error handling support for add_disk()
  nvdimm/btt: use goto error labels on btt_blk_init()
  loop: Remove duplicate assignments
  drbd: Fix double free problem in drbd_create_device
  nvdimm/btt: do not call del_gendisk() if not needed
  bcache: fix use-after-free problem in bcache_device_free()
  zram: replace fsync_bdev with sync_blockdev
  ...
Merge tag 'mtd/for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux 2021-11-08T19:37:39+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-08T19:37:39+00:00 206825f50f908771934e1fba2bfc2e1f1138b36a Pull mtd updates from Miquel Raynal: "Core: - Remove obsolete macros only used by the old nand_ecclayout struct - Don't remove debugfs directory if device is in use - MAINTAINERS: - Add entry for Qualcomm NAND controller driver - Update the devicetree documentation path of hyperbus MTD devices: - block2mtd: - Add support for an optional custom MTD label - Minor refactor to avoid hard coded constant - mtdswap: Remove redundant assignment of pointer eb CFI: - Fixup CFI on ixp4xx Raw NAND controller drivers: - Arasan: - Prevent an unsupported configuration - Xway, Socrates: plat_nand, Pasemi, Orion, mpc5121, GPIO, Au1550nd, AMS-Delta: - Keep the driver compatible with on-die ECC engines - cs553x, lpc32xx_slc, ndfc, sharpsl, tmio, txx9ndfmc: - Revert the commits: "Fix external use of SW Hamming ECC helper" - And let callers use the bare Hamming helpers - Fsmc: Fix use of SM ORDER - Intel: - Fix potential buffer overflow in probe - xway, vf610, txx9ndfm, tegra, stm32, plat_nand, oxnas, omap, mtk, hisi504, gpmi, gpio, denali, bcm6368, atmel: - Make use of the helper function devm_platform_ioremap_resource{,byname}() Onenand drivers: - Samsung: Drop Exynos4 and describe driver in KConfig Raw NAND chip drivers: - Hynix: Add support for H27UCG8T2ETR-BC MLC NAND SPI NOR core: - Add spi-nor device tree binding under SPI NOR maintainers SPI NOR manufacturer drivers: - Enable locking for n25q128a13 SPI NOR controller drivers: - Use devm_platform_ioremap_resource_byname()" * tag 'mtd/for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits) mtd: core: don't remove debugfs directory if device is in use MAINTAINERS: Update the devicetree documentation path of hyperbus mtd: block2mtd: add support for an optional custom MTD label mtd: block2mtd: minor refactor to avoid hard coded constant mtd: fixup CFI on ixp4xx mtd: rawnand: arasan: Prevent an unsupported configuration MAINTAINERS: Add entry for Qualcomm NAND controller driver mtd: rawnand: hynix: Add support for H27UCG8T2ETR-BC MLC NAND mtd: rawnand: xway: Keep the driver compatible with on-die ECC engines mtd: rawnand: socrates: Keep the driver compatible with on-die ECC engines mtd: rawnand: plat_nand: Keep the driver compatible with on-die ECC engines mtd: rawnand: pasemi: Keep the driver compatible with on-die ECC engines mtd: rawnand: orion: Keep the driver compatible with on-die ECC engines mtd: rawnand: mpc5121: Keep the driver compatible with on-die ECC engines mtd: rawnand: gpio: Keep the driver compatible with on-die ECC engines mtd: rawnand: au1550nd: Keep the driver compatible with on-die ECC engines mtd: rawnand: ams-delta: Keep the driver compatible with on-die ECC engines Revert "mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper" Revert "mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper" Revert "mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper" ... 
Pull mtd updates from Miquel Raynal:
 "Core:
   - Remove obsolete macros only used by the old nand_ecclayout struct
   - Don't remove debugfs directory if device is in use
   - MAINTAINERS:
      - Add entry for Qualcomm NAND controller driver
      - Update the devicetree documentation path of hyperbus

  MTD devices:
   - block2mtd:
      - Add support for an optional custom MTD label
      - Minor refactor to avoid hard coded constant
   - mtdswap: Remove redundant assignment of pointer eb

  CFI:
   - Fixup CFI on ixp4xx

  Raw NAND controller drivers:
   - Arasan:
      - Prevent an unsupported configuration
   - Xway, Socrates: plat_nand, Pasemi, Orion, mpc5121, GPIO, Au1550nd,
     AMS-Delta:
      - Keep the driver compatible with on-die ECC engines
   - cs553x, lpc32xx_slc, ndfc, sharpsl, tmio, txx9ndfmc:
      - Revert the commits: "Fix external use of SW Hamming ECC helper"
      - And let callers use the bare Hamming helpers
   - Fsmc: Fix use of SM ORDER
   - Intel:
      - Fix potential buffer overflow in probe
   - xway, vf610, txx9ndfm, tegra, stm32, plat_nand, oxnas, omap, mtk,
     hisi504, gpmi, gpio, denali, bcm6368, atmel:
      - Make use of the helper function devm_platform_ioremap_resource{,byname}()

  Onenand drivers:
   - Samsung: Drop Exynos4 and describe driver in KConfig

  Raw NAND chip drivers:
   - Hynix: Add support for H27UCG8T2ETR-BC MLC NAND

  SPI NOR core:
   - Add spi-nor device tree binding under SPI NOR maintainers

  SPI NOR manufacturer drivers:
   - Enable locking for n25q128a13

  SPI NOR controller drivers:
   - Use devm_platform_ioremap_resource_byname()"

* tag 'mtd/for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits)
  mtd: core: don't remove debugfs directory if device is in use
  MAINTAINERS: Update the devicetree documentation path of hyperbus
  mtd: block2mtd: add support for an optional custom MTD label
  mtd: block2mtd: minor refactor to avoid hard coded constant
  mtd: fixup CFI on ixp4xx
  mtd: rawnand: arasan: Prevent an unsupported configuration
  MAINTAINERS: Add entry for Qualcomm NAND controller driver
  mtd: rawnand: hynix: Add support for H27UCG8T2ETR-BC MLC NAND
  mtd: rawnand: xway: Keep the driver compatible with on-die ECC engines
  mtd: rawnand: socrates: Keep the driver compatible with on-die ECC engines
  mtd: rawnand: plat_nand: Keep the driver compatible with on-die ECC engines
  mtd: rawnand: pasemi: Keep the driver compatible with on-die ECC engines
  mtd: rawnand: orion: Keep the driver compatible with on-die ECC engines
  mtd: rawnand: mpc5121: Keep the driver compatible with on-die ECC engines
  mtd: rawnand: gpio: Keep the driver compatible with on-die ECC engines
  mtd: rawnand: au1550nd: Keep the driver compatible with on-die ECC engines
  mtd: rawnand: ams-delta: Keep the driver compatible with on-die ECC engines
  Revert "mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper"
  Revert "mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper"
  Revert "mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper"
  ...
Merge tag 'spi-nor/for-5.16' into mtd/next 2021-11-07T16:38:36+00:00 Miquel Raynal miquel.raynal@bootlin.com 2021-11-07T16:38:36+00:00 e269d7caf9e0dbd95fac9991991298f74930c2c0 SPI NOR core changes: - Add spi-nor device tree binding under SPI NOR maintainers SPI NOR manufacturer drivers changes: - Enable locking for n25q128a13 SPI NOR controller drivers changes: - Use devm_platform_ioremap_resource_byname() 
SPI NOR core changes:
- Add spi-nor device tree binding under SPI NOR maintainers

SPI NOR manufacturer drivers changes:
- Enable locking for n25q128a13

SPI NOR controller drivers changes:
- Use devm_platform_ioremap_resource_byname()
Merge tag 'nand/for-5.16' into mtd/next 2021-11-07T16:38:05+00:00 Miquel Raynal miquel.raynal@bootlin.com 2021-11-07T16:38:05+00:00 bca20e6a73863f37eb5e04c505be219a65f26a38 Core: * Remove obsolete macros only used by the old nand_ecclayout struct * MAINTAINERS: Add entry for Qualcomm NAND controller driver Raw NAND controller drivers: * Arasan: - Prevent an unsupported configuration * Xway, Socrates: plat_nand, Pasemi, Orion, mpc5121, GPIO, Au1550nd, AMS-Delta: - Keep the driver compatible with on-die ECC engines * cs553x, lpc32xx_slc, ndfc, sharpsl, tmio, txx9ndfmc: - Revert the commits: "Fix external use of SW Hamming ECC helper" - And let callers use the bare Hamming helpers * Fsmc: Fix use of SM ORDER * Intel: - Fix potential buffer overflow in probe * xway, vf610, txx9ndfm, tegra, stm32, plat_nand, oxnas, omap, mtk, hisi504, gpmi, gpio, denali, bcm6368, atmel: - Make use of the helper function devm_platform_ioremap_resource{,byname}() Onenand driver: * Samsung: Drop Exynos4 and describe driver in KConfig Raw NAND chip drivers: * Hynix: Add support for H27UCG8T2ETR-BC MLC NAND 
Core:
* Remove obsolete macros only used by the old nand_ecclayout struct
* MAINTAINERS: Add entry for Qualcomm NAND controller driver

Raw NAND controller drivers:
* Arasan:
  - Prevent an unsupported configuration
* Xway, Socrates: plat_nand, Pasemi, Orion, mpc5121, GPIO, Au1550nd, AMS-Delta:
  - Keep the driver compatible with on-die ECC engines
* cs553x, lpc32xx_slc, ndfc, sharpsl, tmio, txx9ndfmc:
  - Revert the commits: "Fix external use of SW Hamming ECC helper"
  - And let callers use the bare Hamming helpers
* Fsmc: Fix use of SM ORDER
* Intel:
  - Fix potential buffer overflow in probe
* xway, vf610, txx9ndfm, tegra, stm32, plat_nand, oxnas, omap, mtk, hisi504,
  gpmi, gpio, denali, bcm6368, atmel:
  - Make use of the helper function devm_platform_ioremap_resource{,byname}()

Onenand driver:
* Samsung: Drop Exynos4 and describe driver in KConfig

Raw NAND chip drivers:
* Hynix: Add support for H27UCG8T2ETR-BC MLC NAND