linux-stable.git/drivers/mtd, branch v4.9.136

mtd: spi-nor: Add support for is25wp series chips

2018-11-10T15:42:57+00:00

[ Upstream commit d616f81cdd2a21edfa90a595a4e9b143f5ba8414 ]

Added support for is25wp032, is25wp064 and is25wp128.

Signed-off-by: Kimmo Rautkoski 
Reviewed-by: Marek Vasut 
Signed-off-by: Boris Brezillon 
[ Adrian Bunk: Trivial adaption to changed context. ]
Signed-off-by: Adrian Bunk 
Signed-off-by: Sasha Levin

mtdchar: fix overflows in adjustment of `count`

2018-09-26T06:36:37+00:00

[ Upstream commit 6c6bc9ea84d0008024606bf5ba10519e20d851bf ]

The first checks in mtdchar_read() and mtdchar_write() attempt to limit
`count` such that `*ppos + count <= mtd->size`. However, they ignore the
possibility of `*ppos > mtd->size`, allowing the calculation of `count` to
wrap around. `mtdchar_lseek()` prevents seeking beyond mtd->size, but the
pread/pwrite syscalls bypass this.

I haven't found any codepath on which this actually causes dangerous
behavior, but it seems like a sensible change anyway.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn 
Signed-off-by: Boris Brezillon 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mtd/maps: fix solutionengine.c printk format warnings

2018-09-26T06:36:32+00:00

[ Upstream commit 1d25e3eeed1d987404e2d2e451eebac8c15cecc1 ]

Fix 2 printk format warnings (this driver is currently only used by
arch/sh/) by using "%pap" instead of "%lx".

Fixes these build warnings:

../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps':
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                  ~~~~^
                                                  %08x
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                                    ~~~~^
                                                                    %08x

Cc: David Woodhouse 
Cc: Brian Norris 
Cc: Boris Brezillon 
Cc: Marek Vasut 
Cc: Richard Weinberger 
Cc: linux-mtd@lists.infradead.org
Cc: Yoshinori Sato 
Cc: Rich Felker 
Cc: linux-sh@vger.kernel.org
Cc: Sergei Shtylyov 

Signed-off-by: Randy Dunlap 
Signed-off-by: Boris Brezillon 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mtd: ubi: wl: Fix error return code in ubi_wl_init()

2018-09-19T20:47:16+00:00

commit 7233982ade15eeac05c6f351e8d347406e6bcd2f upstream.

Fix to return error code -ENOMEM from the kmem_cache_alloc() error
handling case instead of 0, as done elsewhere in this function.

Fixes: f78e5623f45b ("ubi: fastmap: Erase outdated anchor PEBs during
attach")
Signed-off-by: Wei Yongjun 
Reviewed-by: Boris Brezillon 
Signed-off-by: Richard Weinberger 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

mtd: nand: qcom: Add a NULL check for devm_kasprintf()

2018-08-15T16:14:43+00:00

commit 069f05346d01e7298939f16533953cdf52370be3 upstream.

devm_kasprintf() may fail, so we should better add a NULL check
and propagate an error on failure.

Signed-off-by: Fabio Estevam 
Signed-off-by: Boris Brezillon 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pages

2018-08-03T05:55:22+00:00

[ Upstream commit a75bbe71a27875fdc61cde1af6d799037cef6bed ]

Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page
read is not valid, the host should read redundant parameter page copies.
Fix FSL NAND driver to read the two redundant copies which are mandatory
in the specification.

Signed-off-by: Jane Wan 
Signed-off-by: Boris Brezillon 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mtd: m25p80: consider max message size in m25p80_read

2018-07-22T12:27:35+00:00

commit 9e276de6a367cde07c1a63522152985d4e5cca8b upstream.

Consider a message size limit when calculating the maximum amount
of data that can be read.

The message size limit has been introduced with 4.9, so cc it
to stable.

Signed-off-by: Heiner Kallweit 
Signed-off-by: Cyrille Pitchen 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

mtd: cfi_cmdset_0002: Change erase functions to check chip good only

2018-07-11T14:26:46+00:00

commit 79ca484b613041ca223f74b34608bb6f5221724b upstream.

Currently the functions use to check both chip ready and good.
But the chip ready is not enough to check the operation status.
So change this to check the chip good instead of this.
About the retry functions to make sure the error handling remain it.

Signed-off-by: Tokunori Ikegami 
Reviewed-by: Joakim Tjernlund 
Cc: Chris Packham 
Cc: Brian Norris 
Cc: David Woodhouse 
Cc: Boris Brezillon 
Cc: Marek Vasut 
Cc: Richard Weinberger 
Cc: Cyrille Pitchen 
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman

mtd: cfi_cmdset_0002: Change erase functions to retry for error

2018-07-11T14:26:46+00:00

commit 45f75b8a919a4255f52df454f1ffdee0e42443b2 upstream.

For the word write functions it is retried for error.
But it is not implemented to retry for the erase functions.
To make sure for the erase functions change to retry as same.

This is needed to prevent the flash erase error caused only once.
It was caused by the error case of chip_good() in the do_erase_oneblock().
Also it was confirmed on the MACRONIX flash device MX29GL512FHT2I-11G.
But the error issue behavior is not able to reproduce at this moment.
The flash controller is parallel Flash interface integrated on BCM53003.

Signed-off-by: Tokunori Ikegami 
Reviewed-by: Joakim Tjernlund 
Cc: Chris Packham 
Cc: Brian Norris 
Cc: David Woodhouse 
Cc: Boris Brezillon 
Cc: Marek Vasut 
Cc: Richard Weinberger 
Cc: Cyrille Pitchen 
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman

mtd: cfi_cmdset_0002: Change definition naming to retry write operation

2018-07-11T14:26:46+00:00

commit 85a82e28b023de9b259a86824afbd6ba07bd6475 upstream.

The definition can be used for other program and erase operations also.
So change the naming to MAX_RETRIES from MAX_WORD_RETRIES.

Signed-off-by: Tokunori Ikegami 
Reviewed-by: Joakim Tjernlund 
Cc: Chris Packham 
Cc: Brian Norris 
Cc: David Woodhouse 
Cc: Boris Brezillon 
Cc: Marek Vasut 
Cc: Richard Weinberger 
Cc: Cyrille Pitchen 
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman