linux-stable.git/drivers/mtd, branch v3.0.27

UBI: fix eraseblock picking criteria

2012-04-02T16:27:17+00:00

commit 7eb3aa65853e1b223bfc786b023b702018cb76c0 upstream.

The 'find_wl_entry()' function expects the maximum difference as the second
argument, not the maximum absolute value. So the "unknown" eraseblock picking
was incorrect, as Shmulik Ladkani spotted. This patch fixes the issue.

Reported-by: Shmulik Ladkani 
Signed-off-by: Artem Bityutskiy 
Reviewed-by: Shmulik Ladkani 
Signed-off-by: Greg Kroah-Hartman

UBI: fix error handling in ubi_scan()

2012-04-02T16:27:17+00:00

commit a29852be492d61001d86c6ebf5fff9b93d7b4be9 upstream.

Two bad things can happen in ubi_scan():
1. If kmem_cache_create() fails we jump to out_si and call
   ubi_scan_destroy_si() which calls kmem_cache_destroy().
   But si->scan_leb_slab is NULL.
2. If process_eb() fails we jump to out_vidh, call
   kmem_cache_destroy() and ubi_scan_destroy_si() which calls
   again kmem_cache_destroy().

Signed-off-by: Richard Weinberger 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

UBI: fix debugging messages

2012-01-26T01:24:44+00:00

commit 72f0d453d81d35087b1d3ad7c8285628c2be6e1d upstream.

Patch ab50ff684707031ed4bad2fdd313208ae392e5bb broke UBI debugging messages:
before that commit when UBI debugging was enabled, users saw few useful
debugging messages after attaching an MTD device. However, that patch turned
'dbg_msg()' into 'pr_debug()', so to enable the debugging messages users have
to enable them first via /sys/kernel/debug/dynamic_debug/control, which is
very impractical.

This commit makes 'dbg_msg()' to use 'printk()' instead of 'pr_debug()', just
as it was before the breakage.

Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

UBI: fix nameless volumes handling

2012-01-26T01:24:44+00:00

commit 4a59c797a18917a5cf3ff7ade296b46134d91e6a upstream.

Currently it's possible to create a volume without a name. E.g:
ubimkvol -n 32 -s 2MiB -t static /dev/ubi0 -N ""

After that vtbl_check() will always fail because it does not permit
empty strings.

Signed-off-by: Richard Weinberger 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

UBI: fix use-after-free on error path

2012-01-26T01:24:37+00:00

commit e57e0d8e818512047fe379157c3f77f1b9fabffb upstream.

When we fail to erase a PEB, we free the corresponding erase entry object,
but then re-schedule this object if the error code was something like -EAGAIN.
Obviously, it is a bug to use the object after we have freed it.

Reported-by: Emese Revfy 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

UBI: fix missing scrub when there is a bit-flip

2012-01-26T01:24:37+00:00

commit e801e128b2200c40a0ec236cf2330b2586b6e05a upstream.

Under some cases, when scrubbing the PEB if we did not get the lock on
the PEB it fails to scrub. Add that PEB again to the scrub list

Artem: minor amendments.

Signed-off-by: Bhavesh Parekh 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

mtd: tests: stresstest: bail out if device has not enough eraseblocks

2012-01-26T01:24:32+00:00

commit 2f4478ccff7df845dc9c0f8996a96373122c4417 upstream.

stresstest needs at least two eraseblocks. Bail out gracefully if that
condition is not met. Fixes the following 'division by zero' OOPS:

[  619.100000] mtd_stresstest: MTD device size 131072, eraseblock size 131072, page size 2048, count of eraseblocks 1, pages per eraseblock 64, OOB size 64
[  619.120000] mtd_stresstest: scanning for bad eraseblocks
[  619.120000] mtd_stresstest: scanned 1 eraseblocks, 0 are bad
[  619.130000] mtd_stresstest: doing operations
[  619.130000] mtd_stresstest: 0 operations done
[  619.140000] Division by zero in kernel.
...

caused by

        /* Read or write up 2 eraseblocks at a time - hence 'ebcnt - 1' */
        eb %= (ebcnt - 1);

Signed-off-by: Wolfram Sang 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman

mtd: mtd_blkdevs: don't increase 'open' count on error path

2012-01-26T01:24:32+00:00

commit 342ff28f5a2e5aa3236617bd2bddf6c749677ef2 upstream.

Some error paths in mtd_blkdevs were fixed in the following commit:

    commit 94735ec4044a6d318b83ad3c5794e931ed168d10
    mtd: mtd_blkdevs: fix error path in blktrans_open

But on these error paths, the block device's `dev->open' count is
already incremented before we check for errors. This meant that, while
the error path was handled correctly on the first time through
blktrans_open(), the device is erroneously considered already open on
the second time through.

This problem can be seen, for instance, when a UBI volume is
simultaneously mounted as a UBIFS partition and read through its
corresponding gluebi mtdblockX device. This results in blktrans_open()
passing its error checks (with `dev->open > 0') without actually having
a handle on the device. Here's a summarized log of the actions and
results with nandsim:

    # modprobe nandsim
    # modprobe mtdblock
    # modprobe gluebi
    # modprobe ubifs
    # ubiattach /dev/ubi_ctrl -m 0
    ...
    # ubimkvol /dev/ubi0 -N test -s 16MiB
    ...
    # mount -t ubifs ubi0:test /mnt
    # ls /dev/mtdblock*
    /dev/mtdblock0  /dev/mtdblock1
    # cat /dev/mtdblock1 > /dev/null
    cat: can't open '/dev/mtdblock4': Device or resource busy
    # cat /dev/mtdblock1 > /dev/null

    CPU 0 Unable to handle kernel paging request at virtual address
    fffffff0, epc == 8031536c, ra == 8031f280
    Oops[#1]:
    ...
    Call Trace:
    [<8031536c>] ubi_leb_read+0x14/0x164
    [<8031f280>] gluebi_read+0xf0/0x148
    [<802edba8>] mtdblock_readsect+0x64/0x198
    [<802ecfe4>] mtd_blktrans_thread+0x330/0x3f4
    [<8005be98>] kthread+0x88/0x90
    [<8000bc04>] kernel_thread_helper+0x10/0x18

Signed-off-by: Brian Norris 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman

mtd: mtdoops: skip reading initially bad blocks

2012-01-26T01:24:32+00:00

commit 3538c56329936c78f7d356889908790006d0124c upstream.

Use block_isbad to check and skip the bad blocks reading.
This will allow to get rid of the read errors if bad blocks
are present initially.

Signed-off-by: Roman Tereshonkov 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman

mtdoops: fix the oops_page_used array size

2012-01-26T01:24:32+00:00

commit 556f063580db2953a7e53cd46b47724246320f60 upstream.

The array of unsigned long pointed by oops_page_used is allocated
by vmalloc which requires the size to be in bytes.

BITS_PER_LONG is equal to 32.
If we want to allocate memory for 32 pages with one bit per page then
32 / BITS_PER_LONG  is equal to 1 byte that is 8 bits.
To fix it we need to multiply the result by sizeof(unsigned long) equal to 4.

Signed-off-by: Roman Tereshonkov 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman