<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/mtd, branch linux-5.18.y</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}()</title>
<updated>2022-08-17T12:41:53+00:00</updated>
<author>
<name>Patrice Chotard</name>
<email>patrice.chotard@foss.st.com</email>
</author>
<published>2022-06-29T13:30:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=bd5b5a3b044d76a8b5c1884cb43770407178059f'/>
<id>bd5b5a3b044d76a8b5c1884cb43770407178059f</id>
<content type='text'>
[ Upstream commit f8cd9f632f4415b1e8838bdca8ab42cfb37a6584 ]

For erase operations, reg_proto must be used as indicated in
struct spi_nor description in spi-nor.h.

This issue was found when DT property spi-tx-bus-width is set to 4.
In this case the spi_mem_op-&gt;addr.buswidth is set to 4 for erase command
which is not correct.

Tested on stm32mp157c-ev1 board with mx66l51235f spi-nor.

Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol")
Signed-off-by: Patrice Chotard &lt;patrice.chotard@foss.st.com&gt;
[ta: use nor-&gt;reg_proto in spi_nor_controller_ops_erase()]
Signed-off-by: Tudor Ambarus &lt;tudor.ambarus@microchip.com&gt;
Tested-by: Alexander Sverdlin &lt;alexander.sverdlin@nokia.com&gt;
Reviewed-by: Pratyush Yadav &lt;p.yadav@ti.com&gt;
Link: https://lore.kernel.org/r/20220629133013.3382393-1-patrice.chotard@foss.st.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit f8cd9f632f4415b1e8838bdca8ab42cfb37a6584 ]

For erase operations, reg_proto must be used as indicated in
struct spi_nor description in spi-nor.h.

This issue was found when DT property spi-tx-bus-width is set to 4.
In this case the spi_mem_op-&gt;addr.buswidth is set to 4 for erase command
which is not correct.

Tested on stm32mp157c-ev1 board with mx66l51235f spi-nor.

Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol")
Signed-off-by: Patrice Chotard &lt;patrice.chotard@foss.st.com&gt;
[ta: use nor-&gt;reg_proto in spi_nor_controller_ops_erase()]
Signed-off-by: Tudor Ambarus &lt;tudor.ambarus@microchip.com&gt;
Tested-by: Alexander Sverdlin &lt;alexander.sverdlin@nokia.com&gt;
Reviewed-by: Pratyush Yadav &lt;p.yadav@ti.com&gt;
Link: https://lore.kernel.org/r/20220629133013.3382393-1-patrice.chotard@foss.st.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: dataflash: Add SPI ID table</title>
<updated>2022-08-17T12:41:38+00:00</updated>
<author>
<name>Mark Brown</name>
<email>broonie@kernel.org</email>
</author>
<published>2022-06-20T15:23:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=75c4c70d2367694d211009a1270fb9469bcce2d1'/>
<id>75c4c70d2367694d211009a1270fb9469bcce2d1</id>
<content type='text'>
[ Upstream commit ac4f83482afbfd927d0fe118151b747cf175e724 ]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220620152313.708768-1-broonie@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit ac4f83482afbfd927d0fe118151b747cf175e724 ]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220620152313.708768-1-broonie@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path</title>
<updated>2022-08-17T12:41:38+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert+renesas@glider.be</email>
</author>
<published>2022-06-17T09:26:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=cf5cdfb6b5b1f92035012ae10d72f9fa65a8625f'/>
<id>cf5cdfb6b5b1f92035012ae10d72f9fa65a8625f</id>
<content type='text'>
[ Upstream commit c223a38d62e57aa60a890ea7247e3c58a54478e6 ]

If rpcif_hw_init() fails, Runtime PM is left enabled.

Fixes: b04cc0d912eb80d3 ("memory: renesas-rpc-if: Add support for RZ/G2L")
Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Reviewed-by: Wolfram Sang &lt;wsa+renesas@sang-engineering.com&gt;
Reviewed-by: Lad Prabhakar &lt;prabhakar.mahadev-lad.rj@bp.renesas.com&gt;
Reviewed-by: Sergey Shtylyov &lt;s.shtylyov@omp.ru&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/f3070e1af480cb252ae183d479a593dbbf947685.1655457790.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit c223a38d62e57aa60a890ea7247e3c58a54478e6 ]

If rpcif_hw_init() fails, Runtime PM is left enabled.

Fixes: b04cc0d912eb80d3 ("memory: renesas-rpc-if: Add support for RZ/G2L")
Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Reviewed-by: Wolfram Sang &lt;wsa+renesas@sang-engineering.com&gt;
Reviewed-by: Lad Prabhakar &lt;prabhakar.mahadev-lad.rj@bp.renesas.com&gt;
Reviewed-by: Sergey Shtylyov &lt;s.shtylyov@omp.ru&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/f3070e1af480cb252ae183d479a593dbbf947685.1655457790.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: st_spi_fsm: Add a clk_disable_unprepare() in .probe()'s error path</title>
<updated>2022-08-17T12:41:20+00:00</updated>
<author>
<name>Uwe Kleine-König</name>
<email>u.kleine-koenig@pengutronix.de</email>
</author>
<published>2022-06-07T15:24:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=575a00ebb79ec70c6ff39b99e1f11bbd07f4d319'/>
<id>575a00ebb79ec70c6ff39b99e1f11bbd07f4d319</id>
<content type='text'>
[ Upstream commit 28607b426c3d050714f250d0faeb99d2e9106e90 ]

For all but one error path clk_disable_unprepare() is already there. Add
it to the one location where it's missing.

Fixes: 481815a6193b ("mtd: st_spi_fsm: Handle clk_prepare_enable/clk_disable_unprepare.")
Fixes: 69d5af8d016c ("mtd: st_spi_fsm: Obtain and use EMI clock")
Signed-off-by: Uwe Kleine-König &lt;u.kleine-koenig@pengutronix.de&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220607152458.232847-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 28607b426c3d050714f250d0faeb99d2e9106e90 ]

For all but one error path clk_disable_unprepare() is already there. Add
it to the one location where it's missing.

Fixes: 481815a6193b ("mtd: st_spi_fsm: Handle clk_prepare_enable/clk_disable_unprepare.")
Fixes: 69d5af8d016c ("mtd: st_spi_fsm: Obtain and use EMI clock")
Signed-off-by: Uwe Kleine-König &lt;u.kleine-koenig@pengutronix.de&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220607152458.232847-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: parsers: ofpart: Fix refcount leak in bcm4908_partitions_fw_offset</title>
<updated>2022-08-17T12:41:20+00:00</updated>
<author>
<name>Miaoqian Lin</name>
<email>linmq006@gmail.com</email>
</author>
<published>2022-06-05T07:07:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3193c3a3f4fca65cb06d9d48d07fb96bc1f5b2bd'/>
<id>3193c3a3f4fca65cb06d9d48d07fb96bc1f5b2bd</id>
<content type='text'>
[ Upstream commit e607879b0da18c451de5e91daf239cc2f2f8ff2d ]

of_find_node_by_path() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: bb17230c61a6 ("mtd: parsers: ofpart: support BCM4908 fixed partitions")
Signed-off-by: Miaoqian Lin &lt;linmq006@gmail.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220605070726.5979-1-linmq006@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e607879b0da18c451de5e91daf239cc2f2f8ff2d ]

of_find_node_by_path() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: bb17230c61a6 ("mtd: parsers: ofpart: support BCM4908 fixed partitions")
Signed-off-by: Miaoqian Lin &lt;linmq006@gmail.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220605070726.5979-1-linmq006@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: partitions: Fix refcount leak in parse_redboot_of</title>
<updated>2022-08-17T12:41:20+00:00</updated>
<author>
<name>Miaoqian Lin</name>
<email>linmq006@gmail.com</email>
</author>
<published>2022-05-26T11:06:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7ec48ac18d8f9e002ce9bfbad32741086739e499'/>
<id>7ec48ac18d8f9e002ce9bfbad32741086739e499</id>
<content type='text'>
[ Upstream commit 9f7e62815cf3cbbcb1b8cb21649fb4dfdb3aa016 ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 237960880960 ("mtd: partitions: redboot: seek fis-index-block in the right node")
Signed-off-by: Miaoqian Lin &lt;linmq006@gmail.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220526110652.64849-1-linmq006@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 9f7e62815cf3cbbcb1b8cb21649fb4dfdb3aa016 ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 237960880960 ("mtd: partitions: redboot: seek fis-index-block in the right node")
Signed-off-by: Miaoqian Lin &lt;linmq006@gmail.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220526110652.64849-1-linmq006@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: sm_ftl: Fix deadlock caused by cancel_work_sync in sm_release</title>
<updated>2022-08-17T12:41:20+00:00</updated>
<author>
<name>Duoming Zhou</name>
<email>duoming@zju.edu.cn</email>
</author>
<published>2022-05-24T04:48:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=33859fa2b5fb63454ac2578fe7df2dd47de0e895'/>
<id>33859fa2b5fb63454ac2578fe7df2dd47de0e895</id>
<content type='text'>
[ Upstream commit a61528d997619a518ee8c51cf0ef0513021afaff ]

There is a deadlock between sm_release and sm_cache_flush_work
which is a work item. The cancel_work_sync in sm_release will
not return until sm_cache_flush_work is finished. If we hold
mutex_lock and use cancel_work_sync to wait the work item to
finish, the work item also requires mutex_lock. As a result,
the sm_release will be blocked forever. The race condition is
shown below:

    (Thread 1)             |   (Thread 2)
sm_release                 |
  mutex_lock(&amp;ftl-&gt;mutex)  | sm_cache_flush_work
                           |   mutex_lock(&amp;ftl-&gt;mutex)
  cancel_work_sync         |   ...

This patch moves del_timer_sync and cancel_work_sync out of
mutex_lock in order to mitigate deadlock.

Fixes: 7d17c02a01a1 ("mtd: Add new SmartMedia/xD FTL")
Signed-off-by: Duoming Zhou &lt;duoming@zju.edu.cn&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220524044841.10517-1-duoming@zju.edu.cn
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit a61528d997619a518ee8c51cf0ef0513021afaff ]

There is a deadlock between sm_release and sm_cache_flush_work
which is a work item. The cancel_work_sync in sm_release will
not return until sm_cache_flush_work is finished. If we hold
mutex_lock and use cancel_work_sync to wait the work item to
finish, the work item also requires mutex_lock. As a result,
the sm_release will be blocked forever. The race condition is
shown below:

    (Thread 1)             |   (Thread 2)
sm_release                 |
  mutex_lock(&amp;ftl-&gt;mutex)  | sm_cache_flush_work
                           |   mutex_lock(&amp;ftl-&gt;mutex)
  cancel_work_sync         |   ...

This patch moves del_timer_sync and cancel_work_sync out of
mutex_lock in order to mitigate deadlock.

Fixes: 7d17c02a01a1 ("mtd: Add new SmartMedia/xD FTL")
Signed-off-by: Duoming Zhou &lt;duoming@zju.edu.cn&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220524044841.10517-1-duoming@zju.edu.cn
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: rawnand: meson: Fix a potential double free issue</title>
<updated>2022-08-17T12:41:17+00:00</updated>
<author>
<name>Christophe JAILLET</name>
<email>christophe.jaillet@wanadoo.fr</email>
</author>
<published>2022-05-20T16:41:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=bd7ef0b6b1c485ca5a5a0b1268ac540371dc7f6c'/>
<id>bd7ef0b6b1c485ca5a5a0b1268ac540371dc7f6c</id>
<content type='text'>
[ Upstream commit ec0da06337751b18f6dee06b6526e0f0d6e80369 ]

When meson_nfc_nand_chip_cleanup() is called, it will call:
	meson_nfc_free_buffer(&amp;meson_chip-&gt;nand);
	nand_cleanup(&amp;meson_chip-&gt;nand);

nand_cleanup() in turn will call nand_detach() which calls the
.detach_chip() which is here meson_nand_detach_chip().

meson_nand_detach_chip() already calls meson_nfc_free_buffer(), so we
could double free some memory.

Fix it by removing the unneeded explicit call to meson_nfc_free_buffer().

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Christophe JAILLET &lt;christophe.jaillet@wanadoo.fr&gt;
Acked-by: Liang Yang &lt;liang.yang@amlogic.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/ec15c358b8063f7c50ff4cd628cf0d2e14e43f49.1653064877.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit ec0da06337751b18f6dee06b6526e0f0d6e80369 ]

When meson_nfc_nand_chip_cleanup() is called, it will call:
	meson_nfc_free_buffer(&amp;meson_chip-&gt;nand);
	nand_cleanup(&amp;meson_chip-&gt;nand);

nand_cleanup() in turn will call nand_detach() which calls the
.detach_chip() which is here meson_nand_detach_chip().

meson_nand_detach_chip() already calls meson_nfc_free_buffer(), so we
could double free some memory.

Fix it by removing the unneeded explicit call to meson_nfc_free_buffer().

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Christophe JAILLET &lt;christophe.jaillet@wanadoo.fr&gt;
Acked-by: Liang Yang &lt;liang.yang@amlogic.com&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/ec15c358b8063f7c50ff4cd628cf0d2e14e43f49.1653064877.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: maps: Fix refcount leak in ap_flash_init</title>
<updated>2022-08-17T12:41:17+00:00</updated>
<author>
<name>Miaoqian Lin</name>
<email>linmq006@gmail.com</email>
</author>
<published>2022-05-23T14:32:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a74322d4b897ddc268b340c4a397f6066c2f945d'/>
<id>a74322d4b897ddc268b340c4a397f6066c2f945d</id>
<content type='text'>
[ Upstream commit 77087a04c8fd554134bddcb8a9ff87b21f357926 ]

of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection")
Signed-off-by: Miaoqian Lin &lt;linmq006@gmail.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220523143255.4376-1-linmq006@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 77087a04c8fd554134bddcb8a9ff87b21f357926 ]

of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection")
Signed-off-by: Miaoqian Lin &lt;linmq006@gmail.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220523143255.4376-1-linmq006@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: maps: Fix refcount leak in of_flash_probe_versatile</title>
<updated>2022-08-17T12:41:17+00:00</updated>
<author>
<name>Miaoqian Lin</name>
<email>linmq006@gmail.com</email>
</author>
<published>2022-05-23T14:02:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5d5ddd8771fa9cabeb247fba5f6ab60d63f3fbce'/>
<id>5d5ddd8771fa9cabeb247fba5f6ab60d63f3fbce</id>
<content type='text'>
[ Upstream commit 33ec82a6d2b119938f26e5c8040ed5d92378eb54 ]

of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection")
Signed-off-by: Miaoqian Lin &lt;linmq006@gmail.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220523140205.48625-1-linmq006@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 33ec82a6d2b119938f26e5c8040ed5d92378eb54 ]

of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection")
Signed-off-by: Miaoqian Lin &lt;linmq006@gmail.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Link: https://lore.kernel.org/linux-mtd/20220523140205.48625-1-linmq006@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
