linux-stable.git/drivers/mtd, branch linux-3.19.y

UBI: fix check for "too many bytes"

2015-05-06T20:01:55+00:00

commit 299d0c5b27346a77a0777c993372bf8777d4f2e5 upstream.

The comparison from the previous line seems to have been erroneously
(partially) copied-and-pasted onto the next. The second line should be
checking req.bytes, not req.lnum.

Coverity CID #139400

Signed-off-by: Brian Norris 
[rw: Fixed comparison]
Signed-off-by: Richard Weinberger 
Signed-off-by: Greg Kroah-Hartman

UBI: initialize LEB number variable

2015-05-06T20:01:55+00:00

commit f16db8071ce18819fbd705ddcc91c6f392fb61f8 upstream.

In some of the 'out_not_moved' error paths, lnum may be used
uninitialized. Don't ignore the warning; let's fix it.

This uninitialized variable doesn't have much visible effect in the end,
since we just schedule the PEB for erasure, and its LEB number doesn't
really matter (it just gets printed in debug messages). But let's get it
straight anyway.

Coverity CID #113449

Signed-off-by: Brian Norris 
Signed-off-by: Richard Weinberger 
Signed-off-by: Greg Kroah-Hartman

UBI: fix out of bounds write

2015-05-06T20:01:54+00:00

commit d74adbdb9abf0d2506a6c4afa534d894f28b763f upstream.

If aeb->len >= vol->reserved_pebs, we should not be writing aeb into the
PEB->LEB mapping.

Caught by Coverity, CID #711212.

Signed-off-by: Brian Norris 
Signed-off-by: Richard Weinberger 
Signed-off-by: Greg Kroah-Hartman

UBI: account for bitflips in both the VID header and data

2015-05-06T20:01:54+00:00

commit 8eef7d70f7c6772c3490f410ee2bceab3b543fa1 upstream.

We are completely discarding the earlier value of 'bitflips', which
could reflect a bitflip found in ubi_io_read_vid_hdr(). Let's use the
bitwise OR of header and data 'bitflip' statuses instead.

Coverity CID #1226856

Signed-off-by: Brian Norris 
Signed-off-by: Richard Weinberger 
Signed-off-by: Greg Kroah-Hartman

mtd: nand: pxa3xx: Fix PIO FIFO draining

2015-03-26T12:59:44+00:00

commit 8dad0386b97c4bd6edd56752ca7f2e735fe5beb4 upstream.

The NDDB register holds the data that are needed by the read and write
commands.

However, during a read PIO access, the datasheet specifies that after each 32
bytes read in that register, when BCH is enabled, we have to make sure that the
RDDREQ bit is set in the NDSR register.

This fixes an issue that was seen on the Armada 385, and presumably other mvebu
SoCs, when a read on a newly erased page would end up in the driver reporting a
timeout from the NAND.

Signed-off-by: Maxime Ripard 
Reviewed-by: Boris Brezillon 
Acked-by: Ezequiel Garcia 
Signed-off-by: Brian Norris 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd

2014-12-17T17:59:26+00:00

Pull MTD updates from Brian Norris:
 "Summary:
   - Add device tree support for DoC3

   - SPI NOR:
        Refactoring, for better layering between spi-nor.c and its
        driver users (e.g., m25p80.c)

        New flash device support

        Support 6-byte ID strings

   - NAND:
        New NAND driver for Allwinner SoC's (sunxi)

        GPMI NAND: add support for raw (no ECC) access, for testing
        purposes

        Add ATO manufacturer ID

        A few odd driver fixes

   - MTD tests:
        Allow testers to compensate for OOB bitflips in oobtest

        Fix a torturetest regression

   - nandsim: Support longer ID byte strings

  And more"

* tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd: (63 commits)
  mtd: tests: abort torturetest on erase errors
  mtd: physmap_of: fix potential NULL dereference
  mtd: spi-nor: allow NULL as chip name and try to auto detect it
  mtd: nand: gpmi: add raw oob access functions
  mtd: nand: gpmi: add proper raw access support
  mtd: nand: gpmi: add gpmi_copy_bits function
  mtd: spi-nor: factor out write_enable() for erase commands
  mtd: spi-nor: add support for s25fl128s
  mtd: spi-nor: remove the jedec_id/ext_id
  mtd: spi-nor: add id/id_len for flash_info{}
  mtd: nand: correct the comment of function nand_block_isreserved()
  jffs2: Drop bogus if in comment
  mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpy
  mtd: cafe_nand: drop duplicate .write_page implementation
  mtd: m25p80: Add support for serial flash Spansion S25FL132K
  MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_ids
  mtd: spi-nor: improve wait-till-ready timeout loop
  mtd: delete unnecessary checks before two function calls
  mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  mtd: nand: add ATO manufacturer info
  ...

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09+00:00

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev__once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...

mtd: tests: abort torturetest on erase errors

2014-12-13T03:28:43+00:00

The torture test should quit once it actually induces an error in the
flash. This step was accidentally removed during refactoring.

Without this fix, the torturetest just continues infinitely, or until
the maximum cycle count is reached. e.g.:

   ...
   [ 7619.218171] mtd_test: error -5 while erasing EB 100
   [ 7619.297981] mtd_test: error -5 while erasing EB 100
   [ 7619.377953] mtd_test: error -5 while erasing EB 100
   [ 7619.457998] mtd_test: error -5 while erasing EB 100
   [ 7619.537990] mtd_test: error -5 while erasing EB 100
   ...

Fixes: 6cf78358c94f ("mtd: mtd_torturetest: use mtd_test helpers")
Signed-off-by: Brian Norris 
Cc: Akinobu Mita 
Cc:

mtd: physmap_of: fix potential NULL dereference

2014-12-13T03:12:16+00:00

On device remove, when testing the cmtd field of an of_flash
struct to decide whether it is a concatenated device or not,
we get a false positive on cmtd == NULL, and dereference it
subsequently. This may occur if of_flash_remove() is called
from the cleanup path of of_flash_probe().

Instead, test for NULL first, and only then perform the test
for a concatenated device.

Signed-off-by: Ard Biesheuvel 
Signed-off-by: Brian Norris

mtd: spi-nor: allow NULL as chip name and try to auto detect it

2014-12-01T18:21:42+00:00

This will allow spi-nor users to plainly use JEDEC to detect flash chip.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Brian Norris