Pull mtd updates from Miquel Raynal:
 "MTD core:
   - Handle possible -EPROBE_DEFER from parse_mtd_partitions()
   - Constify buf in mtd_write_user_prot_reg()
   - Constify name param in mtd_bdi_init
   - Fix fall-through warnings for Clang
   - Get rid of Big MTD Lock ouf of mtdchar
   - Drop mtd_mutex usage from mtdchar_open()
   - Don't lock when recursively deleting partitions
   - Use module_mtd_blktrans() to register driver when relevant
   - Parse MTD as NVMEM cells
   - New OTP (one-time-programmable) erase ioctl
   - Require write permissions for locking and badblock ioctls
   - physmap:
      - Fix error return code of physmap_flash_remove()
      - physmap-bt1-rom: Fix unintentional stack access
   - ofpart parser:
      - Support Linksys Northstar partitions
      - Make symbol 'bcm4908_partitions_quirks' static
      - Limit parsing of deprecated DT syntax
      - Support BCM4908 fixed partitions
   - Qcom parser:
      - Incompatible with spi-nor 4k sectors
      - Fix error condition
      - Extend Qcom SMEM parser to SPI flash

  CFI:
   - Disable broken buffered writes for CFI chips within ID 0x2201
   - Address a Coverity report for unused value

  SPI NOR core:
   - Add OTP support
   - Fix module unload while an op in progress
   - Add various cleanup patches
   - Add Michael and Pratyush as designated reviewers in MAINTAINERS

  SPI NOR controller drivers:
   - intel-spi:
      - Move platform data header to x86 subfolder

  NAND core:
   - Fix error handling in nand_prog_page_op() (x2)
   - Add a helper to retrieve the number of ECC bytes per step
   - Add a helper to retrieve the number of ECC steps
   - Let ECC engines advertize the exact number of steps
   - ECC Hamming:
      - Populate the public nsteps field
      - Use the public nsteps field
   - ECC BCH:
      - Populate the public nsteps field
      - Use the public nsteps field

  Raw NAND core:
   - Add support for secure regions in NAND memory
   - Try not to use the ECC private structures
   - Remove duplicate include in rawnand.h
   - BBT:
      - Skip bad blocks when searching for the BBT in NAND (APPLIED THEN REVERTED)

  Raw NAND controller drivers:
   - Qcom:
      - Convert bindings to YAML
      - Use dma_mapping_error() for error check
      - Add missing nand_cleanup() in error path
      - Return actual error code instead of -ENODEV
      - Update last code word register
      - Add helper to configure location register
      - Rename parameter name in macro
      - Add helper to check last code word
      - Convert nandc to chip in Read/Write helper
      - Update register macro name for 0x2c offset
   - GPMI:
      - Fix a double free in gpmi_nand_init
   - Rockchip:
      - Use flexible-array member instead of zero-length array
   - Atmel:
      - Update ecc_stats.corrected counter
   - MXC:
      - Remove unneeded of_match_ptr()
   - R852:
      - replace spin_lock_irqsave by spin_lock in hard IRQ
   - Brcmnand:
      - Move to polling in pio mode on oops write
      - Read/write oob during EDU transfer
      - Fix OOB R/W with Hamming ECC
   - FSMC:
      - Fix error code in fsmc_nand_probe()
   - OMAP:
      - Use ECC information from the generic structures

  SPI-NAND core:
   - Add missing MODULE_DEVICE_TABLE()

  SPI-NAND drivers:
   - gigadevice: Support GD5F1GQ5UExxG"

* tag 'mtd/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (89 commits)
  Revert "mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND"
  mtd: core: Constify buf in mtd_write_user_prot_reg()
  Revert "mtd: spi-nor: macronix: Add support for mx25l51245g"
  mtd: spi-nor: core: Fix an issue of releasing resources during read/write
  mtd: cfi_cmdset_0002: remove redundant assignment to variable timeo
  mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip 0x2201
  mtd: rawnand: qcom: Use dma_mapping_error() for error check
  mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
  mtd: rawnand: qcom: Add missing nand_cleanup() in error path
  mtd: rawnand: Add support for secure regions in NAND memory
  dt-bindings: mtd: Add a property to declare secure regions in NAND chips
  dt-bindings: mtd: Convert Qcom NANDc binding to YAML
  mtd: spi-nor: winbond: add OTP support to w25q32fw/jw
  mtd: spi-nor: implement OTP support for Winbond and similar flashes
  mtd: spi-nor: add OTP support
  mtd: spi-nor: swp: Improve code around spi_nor_check_lock_status_sr()
  mtd: spi-nor: Move Software Write Protection logic out of the core
  mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND
  include: linux: mtd: Remove duplicate include of nand.h
  mtd: parsers: ofpart: support Linksys Northstar partitions
  ...

MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When platform_get_drvdata() returns NULL to info, no error return code
of physmap_flash_remove() is assigned.
To fix this bug, err is assigned with -EINVAL in this case

Fixes: 73566edf9b91 ("[MTD] Convert physmap to platform driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210308034446.3052-1-baijiaju1990@gmail.com

Cast &data to (char *) in order to avoid unintentionally accessing
the stack.

Notice that data is of type u32, so any increment to &data
will be in the order of 4-byte chunks, and this piece of code
is actually intended to be a byte offset.

Fixes: b3e79e7682e0 ("mtd: physmap: Add Baikal-T1 physically mapped ROM support")
Addresses-Coverity-ID: 1497765 ("Out-of-bounds access")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210212104022.GA242669@embeddedor

Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210108092300.18909-1-zhengyongjun3@huawei.com

SPI NOR core changes:

- Initial support for stateful Octal DTR mode using volatile settings
- Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards
- Support for Cypress Semper flash
- Support to specify ECC block size of SPI NOR flashes
- Fixes to avoid clearing of non-volatile Block Protection bits at probe

Generic NAND core:
* ECC management:
  - Add an I/O request tweaking mechanism
  - Entire rework of the software BCH ECC driver, creation of a real
    ECC engine, getting rid of raw NAND structures, migration to more
    generic prototypes, misc fixes and style cleanup. Moved now to the
    Generic NAND layer.
  - Entire rework of the software Hamming ECC driver, creation of a
    real ECC engine, getting rid of raw NAND structures, misc renames,
    comment updates, cleanup, and style fixes. Moved now to the
    generic NAND layer.
  - Necessary plumbing at the NAND level to retrieve generic NAND ECC
    engines (softwares and on-die).
  - Update of the bindings.

Raw NAND core:
* Geting rid of the chip->ecc.priv entry.
* Fix miscellaneous typos in kernel-doc

Raw NAND controller drivers:
* AU1550: Ensure the presence of the right includes
* Davinci: Do not use extra dereferencing
* GPMI:
  - Fix the driver only sense CS0 R/B issue
  - Fix the random DMA timeout issue
  - Use a single line for of_device_id
  - Use of_device_get_match_data()
  - Fix reference count leak in gpmi ops
  - Cleanup makefile
  - Fix binding matching of clocks on different SoCs
* Ingenic: remove redundant get_device() in ingenic_ecc_get()
* Intel LGM: New NAND controller driver
* Marvell: Drop useless line
* Meson:
  - Fix a resource leak in init
  - Fix meson_nfc_dma_buffer_release() arguments
* mxc:
  - Use device_get_match_data()
  - Use a single line for of_device_id
  - Remove platform data support
* Qcom:
  - Add support for SDX55
  - Support for IPQ6018 QPIC NAND controller
  - Fix DMA sync on FLASH_STATUS register read
* Rockchip: New NAND controller driver for RK3308, RK2928 and others
* Sunxi: Add MDMA support

SPI-NAND core:
* Creation of a SPI-NAND on-die ECC engine
* Move ECC related definitions earlier in the driver
* Fix typo in comment
* Fill a default ECC provider/algorithm
* Remove outdated comment
* Fix OOB read
* Allow the case where there is no ECC engine
* Use the external ECC engine logic

SPI-NAND chip drivers:
* Micron:
  - Add support for MT29F2G01AAAED
  - Use more specific names
* Macronix:
  - Add support for MX35LFxG24AD
  - Add support for MX35LFxGE4AD

Others:
* onenand: Use mtd->oops_panic_write as condition
* plat-ram: correctly free memory on error path in platram_probe()

If an error happens in mtd_device_parse_register or mtd_device_register,
memory allocated for struct platram_info is leaked.

Make platram_probe() call platram_remove() on all error paths
after struct platram_info allocation to correctly free resources.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Baskov Evgeiny <baskov@ispras.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201113160537.899-1-baskov@ispras.ru

sparse is unhappy with us casting the __iomem address space pointer to
a type with no address space attribute specified:

"sparse warnings: (new ones prefixed by >>)"
>> drivers/mtd/maps/physmap-bt1-rom.c:78:18: sparse: sparse: cast removes address space '__iomem' of expression

Indeed we perform the __iomem-less type casting but to an integer
variable. The integer variable isn't dereferenced then, so the casting is
safe and won't cause any problem. But in order to make sparse happy and
keep the code coherent let's fix the warning by converting the local
"shift" and "chunk" variables to the "unsigned int" type (since their
value won't ever exceed three) and cast the __iomem-pointers to uintptr_t.
Add the same fix to the bt1_rom_map_read() method for unification.

Fixes: b3e79e7682e0 ("mtd: physmap: Add Baikal-T1 physically mapped ROM support")
Link: https://lore.kernel.org/lkml/202011021254.XC70BaQT-lkp@intel.com/
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201125072640.23516-1-Sergey.Semin@baikalelectronics.ru

Change struct memcard`s element "removeable" -> "removable".

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200922112814.26761-1-bernard@vivo.com

Baikal-T1 Boot Controller provides an access to a RO storages, which are
physically mapped into the SoC MMIO space. In particularly there are
Internal ROM embedded into the SoC with a pre-installed firmware,
externally attached SPI flash (also accessed in the read-only mode) and a
memory region, which mirrors one of them in accordance with the currently
enabled system boot mode (also called Boot ROM).

This commit adds the Internal ROM support to the physmap driver of the MTD
kernel subsystem. The driver will create the Internal ROM MTD as long as
it is defined in the system dts file. The physically mapped SPI flash
region will be used to implement the SPI-mem interface. The mirroring
memory region won't be accessible directly since it's redundant due to
both bootable regions being exposed anyway.

Note we had to create a dedicated code for the ROMs since read from the
corresponding memory regions must be done via the dword-aligned addresses.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200920111445.21816-1-Sergey.Semin@baikalelectronics.ru