[ Upstream commit 2399401feee27c639addc5b7e6ba519d3ca341bf ]

Free 'info' upon remapping error to avoid a memory leak.

Fixes: e644f7d62894 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
[<miquel.raynal@bootlin.com>: Reword the commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221119073307.22929-1-zhengyongjun3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ef0de747f7ad179c7698a5b0e28db05f18ecbf57 ]

During probe, if there was an error the memory region and the memory
map were not properly released.This can lead a system unusable if
deferred probe is in use.

Replace mem_request and map with devm_ioremap_resource

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1d25e3eeed1d987404e2d2e451eebac8c15cecc1 ]

Fix 2 printk format warnings (this driver is currently only used by
arch/sh/) by using "%pap" instead of "%lx".

Fixes these build warnings:

../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps':
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                  ~~~~^
                                                  %08x
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                                    ~~~~^
                                                                    %08x

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 906b268477bc03daaa04f739844c120fe4dbc991 upstream.

kernelci.org reports a warning for this driver, as it copies a local
variable into a 'const char *' string:

    drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]

Using kstrndup() simplifies the code and avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reduces the Kconfig for the RealView by assuming we are
always booting from the device tree, and removing all the uses
of CONFIG_REALVIEW_DT and replacing with CONFIG_ARCH_REALVIEW.

Further:

- Drop REALVIEW_HIGH_PHYS_OFFSET: we don't use this with device
  tree.

- Drop the REALVIEW_EB_ARM11MP_REVB option: we now handle this
  by simply using another device tree.

- Drop the PB1176 secure flash option: this is defined in the
  PB1176 device tree but marked as "disabled", so users who
  want to use it can simply enable it in the device tree and
  go hacking around.

Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

There is a cut and paste issue here.  The bug is that we are allocating
more memory than necessary for msp_maps.  We should be allocating enough
space for a map_info struct (144 bytes) but we instead allocate enough
for an mtd_info struct (1840 bytes).  It's a small waste.

The other part of this is not harmful but when we allocated msp_flash
then we allocated enough space fro a map_info pointer instead of an
mtd_info pointer.  But since pointers are the same size it works out
fine.

Anyway, I decided to clean up all three allocations a bit to make them
a bit more consistent and clear.

Fixes: 68aa0fa87f6d ('[MTD] PMC MSP71xx flash/rootfs mappings')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

We check for NULL but then dereference "info->mtd" on the next line.

Fixes: 72169755cf36 ('mtd: maps: sa1100-flash: show parent device in sysfs')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

drivers/mtd/maps/physmap_of.c: In function ‘of_flash_probe’:
drivers/mtd/maps/physmap_of.c:165:16: warning: variable ‘p’ set but not used [-Wunused-but-set-variable]

This could be a problem if the 'reg' property is not set, since that
means 'count' will be uninitialized.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...

Pull ARM updates from Russell King:
 "Changes included in this pull request:

   - revert pxa2xx-flash back to using ioremap_cached() and switch
     memremap() to use arch_memremap_wb()

   - remove pci=firmware command line argument handling

   - remove unnecessary arm_dma_set_mask() implementation, the generic
     implementation will do for ARM

   - removal of the ARM kallsyms "hack" to work around mode switching
     veneers and vectors located below PAGE_OFFSET

   - tidy up build system output a little

   - add L2 cache power management DT bindings

   - remove duplicated local_irq_disable() in reboot paths

   - handle AMBA primecell devices better at registration time with PM
     domains (needed for Samsung SoCs)

   - ARM specific preparation to support Keystone II kexec"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8567/1: cache-uniphier: activate ways for secondary CPUs
  ARM: 8570/2: Documentation: devicetree: Add PL310 PM bindings
  ARM: 8569/1: pl2x0: Add OF control of cache power management
  ARM: 8568/1: reboot: remove duplicated local_irq_disable()
  ARM: 8566/1: drivers: amba: properly handle devices with power domains
  ARM: provide arm_has_idmap_alias() helper
  ARM: kexec: remove 512MB restriction on kexec crashdump
  ARM: provide improved virt_to_idmap() functionality
  ARM: kexec: fix crashkernel= handling
  ARM: 8557/1: specify install, zinstall, and uinstall as PHONY targets
  ARM: 8562/1: suppress "include/generated/mach-types.h is up to date."
  ARM: 8553/1: kallsyms: remove --page-offset command line option
  ARM: 8552/1: kallsyms: remove special lower address limit for CONFIG_ARM
  ARM: 8555/1: kallsyms: ignore ARM mode switching veneers
  ARM: 8548/1: dma-mapping: remove arm_dma_set_mask()
  ARM: 8554/1: kernel: pci: remove pci=firmware command line parameter handling
  ARM: memremap: implement arch_memremap_wb()
  memremap: add arch specific hook for MEMREMAP_WB mappings
  mtd: pxa2xx-flash: switch back from memremap to ioremap_cached
  ARM: reintroduce ioremap_cached() for creating cached I/O mappings