linux-stable.git/drivers/mtd/devices, branch v4.7.2 Linux kernel stable tree Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd 2016-05-24T18:00:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-05-24T18:00:20+00:00 8bc4d5f394a3facbad6af2f18940f1db3b1a0844 Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ... 
Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...
Merge tag 'nand/for-4.7' of github.com:linux-nand/linux 2016-05-06T01:04:53+00:00 Brian Norris computersforpeace@gmail.com 2016-05-06T01:04:53+00:00 2cbaf5491cb7095252c72e74e79863b75ad2d8d0 Updates from Boris Brezillon: This pull request contains the following infrastructure changes: * introduction of the ECC algo concept to extend the ECC mode one * replacement of the nand_ecclayout infrastructure by something more future-proof. * addition of an mtd-activity led trigger to replace the nand-activity one And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: * rework of the OMAP GPMC and NAND drivers * prepare the sunxi NAND driver to receive DMA support * handle bitflips in erased pages on GPMI revisions that do not support this in hardware. * tag 'nand/for-4.7' of github.com:linux-nand/linux: (152 commits) mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c mtd: nand: sh_flctl: rely on generic DT parsing done in nand_scan_ident() mtd: nand: mxc: rely on generic DT parsing done in nand_scan_ident() ... 
Updates from Boris Brezillon:

This pull request contains the following infrastructure changes:
* introduction of the ECC algo concept to extend the ECC mode one
* replacement of the nand_ecclayout infrastructure by something more
  future-proof.
* addition of an mtd-activity led trigger to replace the nand-activity
  one

And a bunch of specific NAND driver improvements/fixes. Here are the
changes that are worth mentioning:
* rework of the OMAP GPMC and NAND drivers
* prepare the sunxi NAND driver to receive DMA support
* handle bitflips in erased pages on GPMI revisions that do not support
  this in hardware.

* tag 'nand/for-4.7' of github.com:linux-nand/linux: (152 commits)
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  mtd: nand: sh_flctl: rely on generic DT parsing done in nand_scan_ident()
  mtd: nand: mxc: rely on generic DT parsing done in nand_scan_ident()
  ...
mtd: pmc551: add __init attribute 2016-04-26T06:18:29+00:00 Julia Lawall julia.lawall@lip6.fr 2016-04-19T12:33:34+00:00 abbbc60a0c69e05c965ce51cb75c0bee56dc0025 Add __init attribute on a function that is only called from other __init functions and that is not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the function is put in the .text.unlikely segment. Declaring it as __init will cause it to be put in the .init.text and to disappear after initialization. The result of objdump -x on the function before the change is as follows: 00000000000000c6 l F .text.unlikely 000000000000091c fixup_pmc551 And after the change it is as follows: 0000000000000000 l F .init.text 0000000000000917 fixup_pmc551 Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com> 
Add __init attribute on a function that is only called from other __init
functions and that is not inlined, at least with gcc version 4.8.4 on an
x86 machine with allyesconfig.  Currently, the function is put in the
.text.unlikely segment.  Declaring it as __init will cause it to be put in
the .init.text and to disappear after initialization.

The result of objdump -x on the function before the change is as follows:

00000000000000c6 l     F .text.unlikely 000000000000091c fixup_pmc551

And after the change it is as follows:

0000000000000000 l     F .init.text	0000000000000917 fixup_pmc551

Done with the help of Coccinelle.  The semantic patch checks for local
static non-init functions that are called from an __init function and are
not called from any other function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
mtd: docg3: switch to mtd_ooblayout_ops 2016-04-19T20:05:56+00:00 Boris Brezillon boris.brezillon@free-electrons.com 2016-02-03T18:05:04+00:00 1bd0b24737710697e0a850fb1983dcdce1d01196 Replace the nand_ecclayout definition by the equivalent mtd_ooblayout_ops definition. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> 
Replace the nand_ecclayout definition by the equivalent mtd_ooblayout_ops
definition.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
mtd: docg3: use mtd_set_ecclayout() where appropriate 2016-04-19T20:05:55+00:00 Boris Brezillon boris.brezillon@free-electrons.com 2016-02-03T19:14:14+00:00 06af3b023c016bf97e39fbe22087b1d974f9e474 Use the mtd_set_ecclayout() helper instead of directly assigning the mtd->ecclayout field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> 
Use the mtd_set_ecclayout() helper instead of directly assigning the
mtd->ecclayout field.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
mtd: devices: m25p80: add support for mmap read request 2016-04-05T18:06:57+00:00 Vignesh R vigneshr@ti.com 2016-03-29T05:46:17+00:00 08922f644878c9163ada8df3ef9def89be1d5e90 Certain SPI controllers may provide accelerated hardware interface to read from m25p80 type flash devices in order to provide better read performance. SPI core supports such devices with spi_flash_read() API. Call spi_flash_read(), if supported, to make use of such interface. Signed-off-by: Vignesh R <vigneshr@ti.com> [Brian: add memset()] Signed-off-by: Brian Norris <computersforpeace@gmail.com> 
Certain SPI controllers may provide accelerated hardware interface to
read from m25p80 type flash devices in order to provide better read
performance. SPI core supports such devices with spi_flash_read() API.
Call spi_flash_read(), if supported, to make use of such interface.

Signed-off-by: Vignesh R <vigneshr@ti.com>
[Brian: add memset()]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros 2016-04-04T17:41:08+00:00 Kirill A. Shutemov kirill.shutemov@linux.intel.com 2016-04-01T12:29:47+00:00 09cbfeaf1a5a67bfb3201e0c83c810cecb2efa5a PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR() 2016-04-04T07:07:57+00:00 Brian Norris computersforpeace@gmail.com 2016-02-26T10:50:28+00:00 5651d6aaf489d1db48c253cf884b40214e91c2c5 Using KSEG0ADDR makes code highly MIPS dependent and not portable. Thanks to the fix a68f376 ("MIPS: io.h: Define `ioremap_cache'") we can use ioremap_cache which is generic and supported on MIPS as well now. KSEG0ADDR was translating 0x1c000000 into 0x9c000000. With ioremap_cache we use MIPS's __ioremap (and then remap_area_pages). This results in different address (e.g. 0xc0080000) but it still should be cached as expected and it was successfully tested with BCM47186B0. Other than that drivers/bcma/driver_chipcommon_sflash.c nicely setups a struct resource for access window, but we wren't using it. Use it now and drop duplicated info. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> 
Using KSEG0ADDR makes code highly MIPS dependent and not portable.
Thanks to the fix a68f376 ("MIPS: io.h: Define `ioremap_cache'") we can
use ioremap_cache which is generic and supported on MIPS as well now.

KSEG0ADDR was translating 0x1c000000 into 0x9c000000. With ioremap_cache
we use MIPS's __ioremap (and then remap_area_pages). This results in
different address (e.g. 0xc0080000) but it still should be cached as
expected and it was successfully tested with BCM47186B0.

Other than that drivers/bcma/driver_chipcommon_sflash.c nicely setups a
struct resource for access window, but we wren't using it. Use it now
and drop duplicated info.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
mtd: kill the ecclayout->oobavail field 2016-03-08T00:23:09+00:00 Boris BREZILLON boris.brezillon@free-electrons.com 2016-03-07T09:46:51+00:00 f5b8aa78ef086248145363bf1ffe5ca4348b6a98 ecclayout->oobavail is just redundant with the mtd->oobavail field. Moreover, it prevents static const definition of ecc layouts since the NAND framework is calculating this value based on the ecclayout->oobfree field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> 
ecclayout->oobavail is just redundant with the mtd->oobavail field.
Moreover, it prevents static const definition of ecc layouts since the
NAND framework is calculating this value based on the ecclayout->oobfree
field.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
mtd: mtdram: Add parameter for setting writebuf size 2016-03-07T21:06:27+00:00 Alexander Stein alexander.stein@systec-electronic.com 2016-03-02T15:26:59+00:00 c67682c5e0a43bdcb049c7775b78200835f12b95 ubifs uses the write buffer size in recovery algorithm. When inspecting an unclean ubifs recovery fails with writebuf size 64 in mtdram while recovery on actual mtd device with writebuf size of 1024 succeeds. So add a parameter for setting this property. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com> 
ubifs uses the write buffer size in recovery algorithm. When inspecting
an unclean ubifs recovery fails with writebuf size 64 in mtdram while
recovery on actual mtd device with writebuf size of 1024 succeeds.
So add a parameter for setting this property.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>