linux-stable.git/drivers/mmc, branch v6.8 Linux kernel stable tree mmc: sdhci-xenon: add timeout for PHY init complete 2024-02-28T12:41:35+00:00 Elad Nachman enachman@marvell.com 2024-02-22T19:17:14+00:00 09e23823ae9a3e2d5d20f2e1efe0d6e48cef9129 AC5X spec says PHY init complete bit must be polled until zero. We see cases in which timeout can take longer than the standard calculation on AC5X, which is expected following the spec comment above. According to the spec, we must wait as long as it takes for that bit to toggle on AC5X. Cap that with 100 delay loops so we won't get stuck forever. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
AC5X spec says PHY init complete bit must be polled until zero.
We see cases in which timeout can take longer than the standard
calculation on AC5X, which is expected following the spec comment above.
According to the spec, we must wait as long as it takes for that bit to
toggle on AC5X.
Cap that with 100 delay loops so we won't get stuck forever.

Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: sdhci-xenon: fix PHY init clock stability 2024-02-28T12:41:25+00:00 Elad Nachman enachman@marvell.com 2024-02-22T20:09:30+00:00 8e9f25a290ae0016353c9ea13314c95fb3207812 Each time SD/mmc phy is initialized, at times, in some of the attempts, phy fails to completes its initialization which results into timeout error. Per the HW spec, it is a pre-requisite to ensure a stable SD clock before a phy initialization is attempted. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Each time SD/mmc phy is initialized, at times, in some of
the attempts, phy fails to completes its initialization
which results into timeout error. Per the HW spec, it is
a pre-requisite to ensure a stable SD clock before a phy
initialization is attempted.

Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: mmci: stm32: fix DMA API overlapping mappings warning 2024-02-14T10:05:27+00:00 Christophe Kerello christophe.kerello@foss.st.com 2024-02-07T14:39:51+00:00 6b1ba3f9040be5efc4396d86c9752cdc564730be Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST, overlapping mappings aren't supported WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568 add_dma_entry+0x234/0x2f4 Modules linked in: CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1 Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT) Workqueue: events_freezable mmc_rescan Call trace: add_dma_entry+0x234/0x2f4 debug_dma_map_sg+0x198/0x350 __dma_map_sg_attrs+0xa0/0x110 dma_map_sg_attrs+0x10/0x2c sdmmc_idma_prep_data+0x80/0xc0 mmci_prep_data+0x38/0x84 mmci_start_data+0x108/0x2dc mmci_request+0xe4/0x190 __mmc_start_request+0x68/0x140 mmc_start_request+0x94/0xc0 mmc_wait_for_req+0x70/0x100 mmc_send_tuning+0x108/0x1ac sdmmc_execute_tuning+0x14c/0x210 mmc_execute_tuning+0x48/0xec mmc_sd_init_uhs_card.part.0+0x208/0x464 mmc_sd_init_card+0x318/0x89c mmc_attach_sd+0xe4/0x180 mmc_rescan+0x244/0x320 DMA API debug brings to light leaking dma-mappings as dma_map_sg and dma_unmap_sg are not correctly balanced. If an error occurs in mmci_cmd_irq function, only mmci_dma_error function is called and as this API is not managed on stm32 variant, dma_unmap_sg is never called in this error path. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning:

DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST,
overlapping mappings aren't supported
WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568
add_dma_entry+0x234/0x2f4
Modules linked in:
CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1
Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT)
Workqueue: events_freezable mmc_rescan
Call trace:
add_dma_entry+0x234/0x2f4
debug_dma_map_sg+0x198/0x350
__dma_map_sg_attrs+0xa0/0x110
dma_map_sg_attrs+0x10/0x2c
sdmmc_idma_prep_data+0x80/0xc0
mmci_prep_data+0x38/0x84
mmci_start_data+0x108/0x2dc
mmci_request+0xe4/0x190
__mmc_start_request+0x68/0x140
mmc_start_request+0x94/0xc0
mmc_wait_for_req+0x70/0x100
mmc_send_tuning+0x108/0x1ac
sdmmc_execute_tuning+0x14c/0x210
mmc_execute_tuning+0x48/0xec
mmc_sd_init_uhs_card.part.0+0x208/0x464
mmc_sd_init_card+0x318/0x89c
mmc_attach_sd+0xe4/0x180
mmc_rescan+0x244/0x320

DMA API debug brings to light leaking dma-mappings as dma_map_sg and
dma_unmap_sg are not correctly balanced.

If an error occurs in mmci_cmd_irq function, only mmci_dma_error
function is called and as this API is not managed on stm32 variant,
dma_unmap_sg is never called in this error path.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: core: Fix eMMC initialization with 1-bit bus connection 2024-02-13T22:45:44+00:00 Ivan Semenov ivan@semenov.dev 2024-02-06T17:28:45+00:00 ff3206d2186d84e4f77e1378ba1d225633f17b9b Initializing an eMMC that's connected via a 1-bit bus is current failing, if the HW (DT) informs that 4-bit bus is supported. In fact this is a regression, as we were earlier capable of falling back to 1-bit mode, when switching to 4/8-bit bus failed. Therefore, let's restore the behaviour. Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin) Before patch: [134509.044225] mmc0: switch to bus width 4 failed [134509.044509] mmc0: new high speed MMC card at address 0001 [134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134509.281602] mmc0: switch to bus width 4 failed [134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284609] ldm_validate_partition_table(): Disk read failed. [134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289553] mmcblk0: unable to read partition table [134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB [134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read After patch: [134551.089613] mmc0: switch to bus width 4 failed [134551.090377] mmc0: new high speed MMC card at address 0001 [134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134551.113365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 [134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode") Cc: stable@vger.kernel.org Signed-off-by: Ivan Semenov <ivan@semenov.dev> Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Initializing an eMMC that's connected via a 1-bit bus is current failing,
if the HW (DT) informs that 4-bit bus is supported. In fact this is a
regression, as we were earlier capable of falling back to 1-bit mode, when
switching to 4/8-bit bus failed. Therefore, let's restore the behaviour.

Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin)
Before patch:
[134509.044225] mmc0: switch to bus width 4 failed
[134509.044509] mmc0: new high speed MMC card at address 0001
[134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134509.281602] mmc0: switch to bus width 4 failed
[134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284609] ldm_validate_partition_table(): Disk read failed.
[134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289553]  mmcblk0: unable to read partition table
[134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
[134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read

After patch:

[134551.089613] mmc0: switch to bus width 4 failed
[134551.090377] mmc0: new high speed MMC card at address 0001
[134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134551.113365]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
[134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB

Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Semenov <ivan@semenov.dev>
Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: slot-gpio: Allow non-sleeping GPIO ro 2024-02-06T11:35:44+00:00 Alexander Stein alexander.stein@ew.tq-group.com 2024-02-06T08:39:12+00:00 cc9432c4fb159a3913e0ce3173b8218cd5bad2e0 This change uses the appropriate _cansleep or non-sleeping API for reading GPIO read-only state. This allows users with GPIOs that never sleepbeing called in atomic context. Implement the same mechanism as in commit 52af318c93e97 ("mmc: Allow non-sleeping GPIO cd"). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
This change uses the appropriate _cansleep or non-sleeping API for
reading GPIO read-only state. This allows users with GPIOs that
never sleepbeing called in atomic context.

Implement the same mechanism as in commit 52af318c93e97 ("mmc: Allow
non-sleeping GPIO cd").

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: sdhci-pci-o2micro: Fix a warm reboot issue that disk can't be detected by BIOS 2024-02-06T11:08:36+00:00 Fred Ai fred.ai@bayhubtech.com 2024-02-03T10:29:08+00:00 58aeb5623c2ebdadefe6352b14f8076a7073fea0 Driver shall switch clock source from DLL clock to OPE clock when power off card to ensure that card can be identified with OPE clock by BIOS. Signed-off-by: Fred Ai <fred.ai@bayhubtech.com> Fixes:4be33cf18703 ("mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240203102908.4683-1-fredaibayhubtech@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Driver shall switch clock source from DLL clock to
OPE clock when power off card to ensure that card
can be identified with OPE clock by BIOS.

Signed-off-by: Fred Ai <fred.ai@bayhubtech.com>
Fixes:4be33cf18703 ("mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240203102908.4683-1-fredaibayhubtech@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2024-01-18T19:37:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-01-18T19:37:24+00:00 bd736f38c014ba70ba7ec3bdc6af6fe5368d6612 Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ... 
Pull tty / serial updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.8-rc1.

  As usual, Jiri has a bunch of refactoring and cleanups for the tty
  core and drivers in here, along with the usual set of rs485 updates
  (someday this might work properly...)

  Along with those, in here are changes for:

   - sc16is7xx serial driver updates

   - platform driver removal api updates

   - amba-pl011 driver updates

   - tty driver binding updates

   - other small tty/serial driver updates and changes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
  serial: sc16is7xx: refactor EFR lock
  serial: sc16is7xx: reorder code to remove prototype declarations
  serial: sc16is7xx: refactor FIFO access functions to increase commonality
  serial: sc16is7xx: drop unneeded MODULE_ALIAS
  serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
  serial: sc16is7xx: add explicit return for some switch default cases
  serial: sc16is7xx: add macro for max number of UART ports
  serial: sc16is7xx: add driver name to struct uart_driver
  serial: sc16is7xx: use i2c_get_match_data()
  serial: sc16is7xx: use spi_get_device_match_data()
  serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
  serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
  serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
  serial: sc16is7xx: set safe default SPI clock frequency
  serial: sc16is7xx: add check for unsupported SPI modes during probe
  serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
  serial: 8250_exar: Set missing rs485_supported flag
  serial: omap: do not override settings for RS485 support
  serial: core, imx: do not set RS485 enabled if it is not supported
  serial: core: make sure RS485 cannot be enabled when it is not supported
  ...
Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2024-01-18T00:47:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-01-18T00:47:17+00:00 296455ade1fdcf5f8f8c033201633b60946c589a Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ... 
Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem changes
  for 6.8-rc1.

  Other than lots of binder driver changes (as you can see by the merge
  conflicts) included in here are:

   - lots of iio driver updates and additions

   - spmi driver updates

   - eeprom driver updates

   - firmware driver updates

   - ocxl driver updates

   - mhi driver updates

   - w1 driver updates

   - nvmem driver updates

   - coresight driver updates

   - platform driver remove callback api changes

   - tags.sh script updates

   - bus_type constant marking cleanups

   - lots of other small driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
  android: removed duplicate linux/errno
  uio: Fix use-after-free in uio_open
  drivers: soc: xilinx: add check for platform
  firmware: xilinx: Export function to use in other module
  scripts/tags.sh: remove find_sources
  scripts/tags.sh: use -n to test archinclude
  scripts/tags.sh: add local annotation
  scripts/tags.sh: use more portable -path instead of -wholename
  scripts/tags.sh: Update comment (addition of gtags)
  firmware: zynqmp: Convert to platform remove callback returning void
  firmware: turris-mox-rwtm: Convert to platform remove callback returning void
  firmware: stratix10-svc: Convert to platform remove callback returning void
  firmware: stratix10-rsu: Convert to platform remove callback returning void
  firmware: raspberrypi: Convert to platform remove callback returning void
  firmware: qemu_fw_cfg: Convert to platform remove callback returning void
  firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
  firmware: imx-dsp: Convert to platform remove callback returning void
  firmware: coreboot_table: Convert to platform remove callback returning void
  firmware: arm_scpi: Convert to platform remove callback returning void
  firmware: arm_scmi: Convert to platform remove callback returning void
  ...
Merge tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc 2024-01-12T21:57:33+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-01-12T21:57:33+00:00 20077583ccdd4db8aa626eae442e030d217901db Pull MMC updates from Ulf Hansson: "MMC core: - Don't force a retune before eMMC RPMB switch - Add optional HS400 tuning in HS400es initialization - Add a sysfs node to for write-protect-group-size - Add re-tuning test to the mmc-test module - Use mrq.sbc to support close-ended ioctl requests MMC host: - mmci: Add support for SDIO in-band irqs for the stm32 variant - mmc_spi: Remove broken support custom DMA mapped buffers - mtk-sd: Improve and extend the support for tunings - renesas_sdhi: Document support for the RZ/Five variant - sdhci_am654: Drop support for the ti,otap-del-sel DT property - sdhci-brcmstb: Add support for the brcm 74165b0 variant - sdhci-msm: Add compatibles for IPQ4019 and IPQ8074 - sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant - sdhci-xenon: Add support for the Marvell ac5 variant" * tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits) mmc: xenon: Add ac5 support via bounce buffer dt-bindings: mmc: add Marvell ac5 mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0 dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0 mmc: core: Do not force a retune before RPMB switch mmc: core: Add HS400 tuning in HS400es initialization mmc: sdhci_omap: Fix TI SoC dependencies mmc: sdhci_am654: Fix TI SoC dependencies mmc: core: Add wp_grp_size sysfs node mmc: mmc_test: Add re-tuning test mmc: mmc_spi: remove custom DMA mapped buffers dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074 dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA mmc: mtk-sd: Extend number of tuning steps dt-bindings: mmc: mtk-sd: add tuning steps related property mmc: sdhci-omap: don't misuse kernel-doc marker mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data mmc: core: Use mrq.sbc in close-ended ffu mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe() ... 
Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Don't force a retune before eMMC RPMB switch
   - Add optional HS400 tuning in HS400es initialization
   - Add a sysfs node to for write-protect-group-size
   - Add re-tuning test to the mmc-test module
   - Use mrq.sbc to support close-ended ioctl requests

  MMC host:
   - mmci: Add support for SDIO in-band irqs for the stm32 variant
   - mmc_spi: Remove broken support custom DMA mapped buffers
   - mtk-sd: Improve and extend the support for tunings
   - renesas_sdhi: Document support for the RZ/Five variant
   - sdhci_am654: Drop support for the ti,otap-del-sel DT property
   - sdhci-brcmstb: Add support for the brcm 74165b0 variant
   - sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
   - sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
   - sdhci-xenon: Add support for the Marvell ac5 variant"

* tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
  mmc: xenon: Add ac5 support via bounce buffer
  dt-bindings: mmc: add Marvell ac5
  mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0
  dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
  mmc: core: Do not force a retune before RPMB switch
  mmc: core: Add HS400 tuning in HS400es initialization
  mmc: sdhci_omap: Fix TI SoC dependencies
  mmc: sdhci_am654: Fix TI SoC dependencies
  mmc: core: Add wp_grp_size sysfs node
  mmc: mmc_test: Add re-tuning test
  mmc: mmc_spi: remove custom DMA mapped buffers
  dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
  dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
  mmc: mtk-sd: Extend number of tuning steps
  dt-bindings: mmc: mtk-sd: add tuning steps related property
  mmc: sdhci-omap: don't misuse kernel-doc marker
  mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data
  mmc: core: Use mrq.sbc in close-ended ffu
  mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel
  mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()
  ...
Merge tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi 2024-01-09T23:02:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-01-09T23:02:12+00:00 301940020a92ebdef9352a0573075a1db42d17aa Pull spi updates from Mark Brown: "A moderately busy release for SPI, the main core update was the merging of support for multiple chip selects, used in some flash configurations. There were also big overhauls for the AXI SPI Engine and PL022 drivers, plus some new device support for ST. There's a few patches for other trees, API updates to allow the multiple chip select support and one of the naming modernisations touched a controller embedded in the USB code. - Support for multiple chip selects. - A big overhaul for the AXI SPI engine driver, modernising it and adding a bunch of new features. - Modernisation of the PL022 driver, fixing some issues with submitting messages while in atomic context in the process. - Many drivers were converted to use new APIs which avoid outdated terminology for devices and controllers. - Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas RZ/Five" * tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits) spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc dt-bindings: spi: stm32: add st,stm32mp25-spi compatible spi: stm32: use dma_get_slave_caps prior to configuring dma channel spi: axi-spi-engine: fix struct member doc warnings spi: pl022: update description of internal_cs_control() spi: pl022: delete description of cur_msg spi: dw: Remove Intel Thunder Bay SOC support spi: dw: Remove Intel Thunder Bay SOC support spi: sh-msiof: Enforce fixed DTDL for R-Car H3 spi: ljca: switch to use devm_spi_alloc_host() spi: cs42l43: switch to use devm_spi_alloc_host() spi: zynqmp-gqspi: switch to use modern name spi: zynq-qspi: switch to use modern name spi: xtensa-xtfpga: switch to use modern name spi: xlp: switch to use modern name spi: xilinx: switch to use modern name spi: xcomm: switch to use modern name spi: uniphier: switch to use modern name spi: topcliff-pch: switch to use modern name spi: wpcm-fiu: switch to use devm_spi_alloc_host() ... 
Pull spi updates from Mark Brown:
 "A moderately busy release for SPI, the main core update was the
  merging of support for multiple chip selects, used in some flash
  configurations. There were also big overhauls for the AXI SPI Engine
  and PL022 drivers, plus some new device support for ST.

  There's a few patches for other trees, API updates to allow the
  multiple chip select support and one of the naming modernisations
  touched a controller embedded in the USB code.

   - Support for multiple chip selects.

   - A big overhaul for the AXI SPI engine driver, modernising it and
     adding a bunch of new features.

   - Modernisation of the PL022 driver, fixing some issues with
     submitting messages while in atomic context in the process.

   - Many drivers were converted to use new APIs which avoid outdated
     terminology for devices and controllers.

   - Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas
     RZ/Five"

* tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits)
  spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc
  dt-bindings: spi: stm32: add st,stm32mp25-spi compatible
  spi: stm32: use dma_get_slave_caps prior to configuring dma channel
  spi: axi-spi-engine: fix struct member doc warnings
  spi: pl022: update description of internal_cs_control()
  spi: pl022: delete description of cur_msg
  spi: dw: Remove Intel Thunder Bay SOC support
  spi: dw: Remove Intel Thunder Bay SOC support
  spi: sh-msiof: Enforce fixed DTDL for R-Car H3
  spi: ljca: switch to use devm_spi_alloc_host()
  spi: cs42l43: switch to use devm_spi_alloc_host()
  spi: zynqmp-gqspi: switch to use modern name
  spi: zynq-qspi: switch to use modern name
  spi: xtensa-xtfpga: switch to use modern name
  spi: xlp: switch to use modern name
  spi: xilinx: switch to use modern name
  spi: xcomm: switch to use modern name
  spi: uniphier: switch to use modern name
  spi: topcliff-pch: switch to use modern name
  spi: wpcm-fiu: switch to use devm_spi_alloc_host()
  ...