linux-stable.git/drivers/mmc, branch v6.2.2

mmc: jz4740: Work around bug on JZ4760(B)

2023-02-13T23:14:05+00:00

On JZ4760 and JZ4760B, SD cards fail to run if the maximum clock
rate is set to 50 MHz, even though the controller officially does
support it.

Until the actual bug is found and fixed, limit the maximum clock rate to
24 MHz.

Signed-off-by: Paul Cercueil 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230131210229.68129-1-paul@crapouillou.net
Signed-off-by: Ulf Hansson

mmc: mmc_spi: fix error handling in mmc_spi_probe()

2023-02-13T23:09:17+00:00

If mmc_add_host() fails, it doesn't need to call mmc_remove_host(),
or it will cause null-ptr-deref, because of deleting a not added
device in mmc_remove_host().

To fix this, goto label 'fail_glue_init', if mmc_add_host() fails,
and change the label 'fail_add_host' to 'fail_gpiod_request'.

Fixes: 15a0580ced08 ("mmc_spi host driver")
Signed-off-by: Yang Yingliang 
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230131013835.3564011-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson

mmc: sdio: fix possible resource leaks in some error paths

2023-02-13T23:06:22+00:00

If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can
not release the resources, because the sdio function is not presented
in these two cases, it won't call of_node_put() or put_device().

To fix these leaks, make sdio_func_present() only control whether
device_del() needs to be called or not, then always call of_node_put()
and put_device().

In error case in sdio_init_func(), the reference of 'card->dev' is
not get, to avoid redundant put in sdio_free_func_cis(), move the
get_device() to sdio_alloc_func() and put_device() to sdio_release_func(),
it can keep the get/put function be balanced.

Without this patch, while doing fault inject test, it can get the
following leak reports, after this fix, the leak is gone.

unreferenced object 0xffff888112514000 (size 2048):
  comm "kworker/3:2", pid 65, jiffies 4294741614 (age 124.774s)
  hex dump (first 32 bytes):
    00 e0 6f 12 81 88 ff ff 60 58 8d 06 81 88 ff ff  ..o.....`X......
    10 40 51 12 81 88 ff ff 10 40 51 12 81 88 ff ff  .@Q......@Q.....
  backtrace:
    [<000000009e5931da>] kmalloc_trace+0x21/0x110
    [<000000002f839ccb>] mmc_alloc_card+0x38/0xb0 [mmc_core]
    [<0000000004adcbf6>] mmc_sdio_init_card+0xde/0x170 [mmc_core]
    [<000000007538fea0>] mmc_attach_sdio+0xcb/0x1b0 [mmc_core]
    [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]

unreferenced object 0xffff888112511000 (size 2048):
  comm "kworker/3:2", pid 65, jiffies 4294741623 (age 124.766s)
  hex dump (first 32 bytes):
    00 40 51 12 81 88 ff ff e0 58 8d 06 81 88 ff ff  .@Q......X......
    10 10 51 12 81 88 ff ff 10 10 51 12 81 88 ff ff  ..Q.......Q.....
  backtrace:
    [<000000009e5931da>] kmalloc_trace+0x21/0x110
    [<00000000fcbe706c>] sdio_alloc_func+0x35/0x100 [mmc_core]
    [<00000000c68f4b50>] mmc_attach_sdio.cold.18+0xb1/0x395 [mmc_core]
    [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]

Fixes: 3d10a1ba0d37 ("sdio: fix reference counting in sdio_remove_func()")
Signed-off-by: Yang Yingliang 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230130125808.3471254-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson

mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't set

2023-02-13T22:58:43+00:00

Some SDIO WiFi modules stopped working after SDIO interrupt mode
was added if cap_sdio_irq isn't set in device tree. This patch was
confirmed to fix the issue.

Fixes: 066ecde6d826 ("mmc: meson-gx: add SDIO interrupt support")
Reported-by: Geraldo Nascimento 
Tested-by: Geraldo Nascimento 
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit 
Link: https://lore.kernel.org/r/816cba9f-ff92-31a2-60f0-aca542d1d13e@gmail.com
Signed-off-by: Ulf Hansson

mmc: sunxi-mmc: Fix clock refcount imbalance during unbind

2023-01-02T14:57:36+00:00

If the controller is suspended by runtime PM, the clock is already
disabled, so do not try to disable it again during removal. Use
pm_runtime_disable() to flush any pending runtime PM transitions.

Fixes: 9a8e1e8cc2c0 ("mmc: sunxi: Add runtime_pm support")
Signed-off-by: Samuel Holland 
Acked-by: Jernej Skrabec 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220810022509.43743-1-samuel@sholland.org
Signed-off-by: Ulf Hansson

mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting

2023-01-02T12:35:11+00:00

Current code logic may be impacted by the setting of ROM/Bootloader,
so unmask these bits first, then setting these bits accordingly.

Fixes: 2b16cf326b70 ("mmc: sdhci-esdhc-imx: move tuning static configuration into hwinit function")
Signed-off-by: Haibo Chen 
Acked-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221207112315.1812222-1-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson

Merge tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2022-12-13T21:41:26+00:00

Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - A few minor improvements and cleanups

  MMC host:
   - Remove some redundant calls to local_irq_{save,restore}()
   - Replace kmap_atomic() with kmap_local_page()
   - Take return values from mmc_add_host() into account
   - dw_mmc-pltfm: Add support to configure clk-phase for socfpga
   - hsq: Minimize latency by using a fifo to dispatch requests
   - litex_mmc: Fixup corner case for polling mode
   - mtk-sd: Add inline crypto engine clock control
   - mtk-sd: Add support for the mediatek MT7986 variant
   - renesas_sdhi: Improve reset from HS400 mode
   - renesas_sdhi: Take DMA end interrupts into account
   - sdhci: Avoid unnecessary update of clock
   - sdhci: Fix an SD tuning issue
   - sdhci-brcmst: Add Kamal Dasu as maintainer for the Broadcom driver
   - sdhci-esdhc-imx: Improve tuning logic
   - sdhci-esdhc-imx: Improve support for the imxrt1050 variant
   - sdhci_f_sdh30: Add support for non-removable media
   - sdhci_f_sdh30: Add support for the Socionext F_SDH30_E51 variant
   - sdhci_f_sdh30: Add reset control support
   - sdhci-msm: Add support for the Qcom SM8550/SM8350/SM6375 variants
   - sdhci-msm: Add support for the Qcom MSM8976 variant
   - sdhci-of-arasan: Add support for dynamic configuration
   - sdhci-of-esdhc: Limit the clock frequency to confirm to spec
   - sdhci-pci: Enable asynchronous probe
   - sdhci-sprd: Improve card detection
   - sdhci-tegra: Improve reset support
   - sdhci-tegra: Add support to program MC stream ID
   - sunplus-mmc: Add new mmc driver for the Sunplus SP7021 controller
   - vub300: Fix warning splat for SDIO irq

  MEMSTICK core:
   - memstick: A few minor improvements and cleanups

  CLK/IOMMU:
   - clk: socfpga: Drop redundant support for clk-phase for the SD/MMC clk
   - iommu: Add tegra specific helper to get stream_id"

* tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
  mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K
  mmc: sdhci-of-esdhc: Modify mismatched function name
  memstick/mspro_block: Convert to use sysfs_emit()/sysfs_emit_at() APIs
  mmc: sdhci-tegra: Issue CMD and DAT resets together
  mmc: sdhci-tegra: Add support to program MC stream ID
  mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data
  mmc: sdhci-tegra: Sort includes alphabetically
  iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper
  iommu: Add note about struct iommu_fwspec usage
  mmc: sdhci-brcmstb: Resolve "unused" warnings with CONFIG_OF=n
  dt-bindings: mmc: sdhci-msm: allow dma-coherent
  dt-bindings: mmc: sdhci-msm: drop properties mentioned in common MMC
  dt-bindings: mmc: sdhci-msm: cleanup style
  dt-bindings: mmc: sdhci-am654: cleanup style
  dt-bindings: mmc: sdhci: document sdhci-caps and sdhci-caps-mask
  mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
  MAINTAINERS: Update maintainer for SDHCI Broadcom BRCMSTB driver
  mmc: sdhci-of-esdhc: limit the SDHC clock frequency
  mmc: sdhci: Remove unneeded semicolon
  mmc: core: Normalize the error handling branch in sd_read_ext_regs()
  ...

Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

2022-12-13T00:22:22+00:00

Pull random number generator updates from Jason Donenfeld:

 - Replace prandom_u32_max() and various open-coded variants of it,
   there is now a new family of functions that uses fast rejection
   sampling to choose properly uniformly random numbers within an
   interval:

       get_random_u32_below(ceil) - [0, ceil)
       get_random_u32_above(floor) - (floor, U32_MAX]
       get_random_u32_inclusive(floor, ceil) - [floor, ceil]

   Coccinelle was used to convert all current users of
   prandom_u32_max(), as well as many open-coded patterns, resulting in
   improvements throughout the tree.

   I'll have a "late" 6.1-rc1 pull for you that removes the now unused
   prandom_u32_max() function, just in case any other trees add a new
   use case of it that needs to converted. According to linux-next,
   there may be two trivial cases of prandom_u32_max() reintroductions
   that are fixable with a 's/.../.../'. So I'll have for you a final
   conversion patch doing that alongside the removal patch during the
   second week.

   This is a treewide change that touches many files throughout.

 - More consistent use of get_random_canary().

 - Updates to comments, documentation, tests, headers, and
   simplification in configuration.

 - The arch_get_random*_early() abstraction was only used by arm64 and
   wasn't entirely useful, so this has been replaced by code that works
   in all relevant contexts.

 - The kernel will use and manage random seeds in non-volatile EFI
   variables, refreshing a variable with a fresh seed when the RNG is
   initialized. The RNG GUID namespace is then hidden from efivarfs to
   prevent accidental leakage.

   These changes are split into random.c infrastructure code used in the
   EFI subsystem, in this pull request, and related support inside of
   EFISTUB, in Ard's EFI tree. These are co-dependent for full
   functionality, but the order of merging doesn't matter.

 - Part of the infrastructure added for the EFI support is also used for
   an improvement to the way vsprintf initializes its siphash key,
   replacing an sleep loop wart.

 - The hardware RNG framework now always calls its correct random.c
   input function, add_hwgenerator_randomness(), rather than sometimes
   going through helpers better suited for other cases.

 - The add_latent_entropy() function has long been called from the fork
   handler, but is a no-op when the latent entropy gcc plugin isn't
   used, which is fine for the purposes of latent entropy.

   But it was missing out on the cycle counter that was also being mixed
   in beside the latent entropy variable. So now, if the latent entropy
   gcc plugin isn't enabled, add_latent_entropy() will expand to a call
   to add_device_randomness(NULL, 0), which adds a cycle counter,
   without the absent latent entropy variable.

 - The RNG is now reseeded from a delayed worker, rather than on demand
   when used. Always running from a worker allows it to make use of the
   CPU RNG on platforms like S390x, whose instructions are too slow to
   do so from interrupts. It also has the effect of adding in new inputs
   more frequently with more regularity, amounting to a long term
   transcript of random values. Plus, it helps a bit with the upcoming
   vDSO implementation (which isn't yet ready for 6.2).

 - The jitter entropy algorithm now tries to execute on many different
   CPUs, round-robining, in hopes of hitting even more memory latencies
   and other unpredictable effects. It also will mix in a cycle counter
   when the entropy timer fires, in addition to being mixed in from the
   main loop, to account more explicitly for fluctuations in that timer
   firing. And the state it touches is now kept within the same cache
   line, so that it's assured that the different execution contexts will
   cause latencies.

* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
  random: include  in the right header
  random: align entropy_timer_state to cache line
  random: mix in cycle counter when jitter timer fires
  random: spread out jitter callback to different CPUs
  random: remove extraneous period and add a missing one in comments
  efi: random: refresh non-volatile random seed when RNG is initialized
  vsprintf: initialize siphash key using notifier
  random: add back async readiness notifier
  random: reseed in delayed work rather than on-demand
  random: always mix cycle counter in add_latent_entropy()
  hw_random: use add_hwgenerator_randomness() for early entropy
  random: modernize documentation comment on get_random_bytes()
  random: adjust comment to account for removed function
  random: remove early archrandom abstraction
  random: use random.trust_{bootloader,cpu} command line option only
  stackprotector: actually use get_random_canary()
  stackprotector: move get_random_canary() into stackprotector.h
  treewide: use get_random_u32_inclusive() when possible
  treewide: use get_random_u32_{above,below}() instead of manual loop
  treewide: use get_random_u32_below() instead of deprecated function
  ...

mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K

2022-12-09T09:32:58+00:00

When the clock is less than 400K, some SD cards fail to initialize
because CLK_AUTO is enabled.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Wenchao Chen 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221207051909.32126-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson

mmc: sdhci-of-esdhc: Modify mismatched function name

2022-12-09T09:30:24+00:00

No functional modification involved.

drivers/mmc/host/sdhci-of-esdhc.c:243: warning: expecting prototype for _fixup(). Prototype was for esdhc_writel_fixup() instead.
drivers/mmc/host/sdhci-of-esdhc.c:117: warning: expecting prototype for _fixup(). Prototype was for esdhc_readl_fixup() instead.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3397
Reported-by: Abaci Robot 
Signed-off-by: Jiapeng Chong 
Acked-by: Adrian Hunter 
Link: https://lore.kernel.org/r/20221209034134.38477-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Ulf Hansson