linux-stable.git/drivers/mmc, branch v5.3.17

mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card

2019-12-17T19:08:07+00:00

commit f6498b922e57aecbe3b7fa30a308d9d586c0c369 upstream.

Pandora_wl1251_init_card was used to do special pdata based
setup of the sdio mmc interface. This does no longer work with
v4.7 and later. A fix requires a device tree based mmc3 setup.

Therefore we move the special setup to omap_hsmmc.c instead
of calling some pdata supplied init_card function.

The new code checks for a DT child node compatible to wl1251
so it will not affect other MMC3 use cases.

Generally, this code was and still is a hack and should be
moved to mmc core to e.g. read such properties from optional
DT child nodes.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller 
Cc:  # v4.7+
[Ulf: Fixed up some checkpatch complaints]
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-at91: fix quirk2 overwrite

2019-11-20T15:49:16+00:00

commit fed23c5829ecab4ddc712d7b0046e59610ca3ba4 upstream.

The quirks2 are parsed and set (e.g. from DT) before the quirk for broken
HS200 is set in the driver.
The driver needs to enable just this flag, not rewrite the whole quirk set.

Fixes: 7871aa60ae00 ("mmc: sdhci-of-at91: add quirk for broken HS200")
Signed-off-by: Eugen Hristev 
Acked-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-omap: Fix Tuning procedure for temperatures < -20C

2019-10-29T08:22:31+00:00

commit feb40824d78eac5e48f56498dca941754dff33d7 upstream.

According to the App note[1] detailing the tuning algorithm, for
temperatures < -20C, the initial tuning value should be min(largest value
in LPW - 24, ceil(13/16 ratio of LPW)). The largest value in LPW is
(max_window + 4 * (max_len - 1)) and not (max_window + 4 * max_len) itself.
Fix this implementation.

[1] http://www.ti.com/lit/an/spraca9b/spraca9b.pdf

Fixes: 961de0a856e3 ("mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)")
Cc: stable@vger.kernel.org
Signed-off-by: Faiz Abbas 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: cqhci: Commit descriptors before setting the doorbell

2019-10-29T08:22:30+00:00

commit c07d0073b9ec80a139d07ebf78e9c30d2a28279e upstream.

Add a write memory barrier to make sure that descriptors are actually
written to memory, before ringing the doorbell.

Signed-off-by: Faiz Abbas 
Acked-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: mxs: fix flags passed to dmaengine_prep_slave_sg

2019-10-29T08:22:30+00:00

commit 2bb9f7566ba7ab3c2154964461e37b52cdc6b91b upstream.

Since ceeeb99cd821 we no longer abuse the DMA_CTRL_ACK flag for custom
driver use and introduced the MXS_DMA_CTRL_WAIT4END instead. We have not
changed all users to this flag though. This patch fixes it for the
mxs-mmc driver.

Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Sascha Hauer 
Tested-by: Fabio Estevam 
Reported-by: Bruno Thomsen 
Tested-by: Bruno Thomsen 
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: Let drivers define their DMA mask

2019-10-11T16:36:19+00:00

commit 4ee7dde4c777f14cb0f98dd201491bf6cc15899b upstream.

Add host operation ->set_dma_mask() so that drivers can define their own
DMA masks.

Signed-off-by: Adrian Hunter 
Tested-by: Nicolin Chen 
Signed-off-by: Thierry Reding 
Cc: stable@vger.kernel.org # v4.15 +
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence

2019-10-11T16:36:18+00:00

commit 121bd08b029e03404c451bb237729cdff76eafed upstream.

We must not unconditionally set the DMA snoop bit; if the DMA API is
assuming that the device is not DMA coherent, and the device snoops the
CPU caches, the device can see stale cache lines brought in by
speculative prefetch.

This leads to the device seeing stale data, potentially resulting in
corrupted data transfers.  Commonly, this results in a descriptor fetch
error such as:

mmc0: ADMA error
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00002202
mmc0: sdhci: Blk size:  0x00000008 | Blk cnt:  0x00000001
mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000013
mmc0: sdhci: Present:   0x01f50008 | Host ctl: 0x00000038
mmc0: sdhci: Power:     0x00000003 | Blk gap:  0x00000000
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x000040d8
mmc0: sdhci: Timeout:   0x00000003 | Int stat: 0x00000001
mmc0: sdhci: Int enab:  0x037f108f | Sig enab: 0x037f108b
mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202
mmc0: sdhci: Caps:      0x35fa0000 | Caps_1:   0x0000af00
mmc0: sdhci: Cmd:       0x0000333a | Max curr: 0x00000000
mmc0: sdhci: Resp[0]:   0x00000920 | Resp[1]:  0x001d8a33
mmc0: sdhci: Resp[2]:   0x325b5900 | Resp[3]:  0x3f400e00
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err:  0x00000009 | ADMA Ptr: 0x000000236d43820c
mmc0: sdhci: ============================================
mmc0: error -5 whilst initialising SD card

but can lead to other errors, and potentially direct the SDHCI
controller to read/write data to other memory locations (e.g. if a valid
descriptor is visible to the device in a stale cache line.)

Fix this by ensuring that the DMA snoop bit corresponds with the
behaviour of the DMA API.  Since the driver currently only supports DT,
use of_dma_is_coherent().  Note that device_get_dma_attr() can not be
used as that risks re-introducing this bug if/when the driver is
converted to ACPI.

Signed-off-by: Russell King 
Acked-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: improve ADMA error reporting

2019-10-11T16:36:17+00:00

commit d1c536e3177390da43d99f20143b810c35433d1f upstream.

ADMA errors are potentially data corrupting events; although we print
the register state, we do not usefully print the ADMA descriptors.
Worse than that, we print them by referencing their virtual address
which is meaningless when the register state gives us the DMA address
of the failing descriptor.

Print the ADMA descriptors giving their DMA addresses rather than their
virtual addresses, and print them using SDHCI_DUMP() rather than DBG().

We also do not show the correct value of the interrupt status register;
the register dump shows the current value, after we have cleared the
pending interrupts we are going to service.  What is more useful is to
print the interrupts that _were_ pending at the time the ADMA error was
encountered.  Fix that too.

Signed-off-by: Russell King 
Acked-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: tegra: Implement ->set_dma_mask()

2019-10-11T16:36:17+00:00

commit b960bc448a252428bacca271f3416a8bda3b599b upstream.

The SDHCI controller on Tegra186 supports 40-bit addressing, which is
usually enough to address all of system memory. However, if the SDHCI
controller is behind an IOMMU, the address space can go beyond. This
happens on Tegra186 and later where the ARM SMMU has an input address
space of 48 bits. If the DMA API is backed by this ARM SMMU, the top-
down IOVA allocator will cause IOV addresses to be returned that the
SDHCI controller cannot access.

Unfortunately, prior to the introduction of the ->set_dma_mask() host
operation, the SDHCI core would set either a 64-bit DMA mask if the
controller claimed to support 64-bit addressing, or a 32-bit DMA mask
otherwise.

Since the full 64 bits cannot be addressed on Tegra, this had to be
worked around in commit 68481a7e1c84 ("mmc: tegra: Mark 64 bit dma
broken on Tegra186") by setting the SDHCI_QUIRK2_BROKEN_64_BIT_DMA
quirk, which effectively restricts the DMA mask to 32 bits.

One disadvantage of this is that dma_map_*() APIs will now try to use
the swiotlb to bounce DMA to addresses beyond of the controller's DMA
mask. This in turn caused degraded performance and can lead to
situations where the swiotlb buffer is exhausted, which in turn leads
to DMA transfers to fail.

With the recent introduction of the ->set_dma_mask() host operation,
this can now be properly fixed. For each generation of Tegra, the exact
supported DMA mask can be configured. This kills two birds with one
stone: it avoids the use of bounce buffers because system memory never
exceeds the addressable memory range of the SDHCI controllers on these
devices, and at the same time when an IOMMU is involved, it prevents
IOV addresses from being allocated beyond the addressible range of the
controllers.

Since the DMA mask is now properly handled, the 64-bit DMA quirk can be
removed.

Signed-off-by: Nicolin Chen 
[treding@nvidia.com: provide more background in commit message]
Tested-by: Nicolin Chen 
Acked-by: Adrian Hunter 
Signed-off-by: Thierry Reding 
Cc: stable@vger.kernel.org # v4.15 +
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: mtk-sd: Re-store SDIO IRQs mask at system resume

2019-10-05T13:12:08+00:00

[ Upstream commit 1c81d69d4c98aab56c5a7d5a810f84aefdb37e9b ]

In cases when SDIO IRQs have been enabled, runtime suspend is prevented by
the driver. However, this still means msdc_runtime_suspend|resume() gets
called during system suspend/resume, via pm_runtime_force_suspend|resume().

This means during system suspend/resume, the register context of the mtk-sd
device most likely loses its register context, even in cases when SDIO IRQs
have been enabled.

To re-enable the SDIO IRQs during system resume, the mtk-sd driver
currently relies on the mmc core to re-enable the SDIO IRQs when it resumes
the SDIO card, but this isn't the recommended solution. Instead, it's
better to deal with this locally in the mtk-sd driver, so let's do that.

Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin